• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1072-1075
• /
• 2001

$Al_2O_3$ ceramics are generally used as components in processing equipment, devices or machinery because it can perform some functions better than competing metals or polymers. Many of these applications rely on $Al_2O_3$ ceramics special electromagnetic properties, its relative chemical inertness, hardness, strength and its temperature capabilities. But $Al_2O_3$ ceramics are brittle materials, a fact that may cause problems and at the same time be helpful while machining with laser. This study described a basic study of the input parameters effect on the dimension of the microhole at the $Al_2O_3$ ceramics using Excimer laser. In the laser microhole machining of $Al_2O_3$ ceramics, major input parameters are pulse energy, pulse power, pulse frequency and pulse numbers. In conclusion, we can get a smaller microhole and diameter rate by an appropriate pulse energy, pulse frequency and pulse number.

• 한국세라믹학회지
• /
• 제39권5호
• /
• pp.446-451
• /
• 2002

지르코니아/알루미나 복합분말의 분무건조로 제조된 과립들의 형상과 성형시 과립 경계면 파괴에 분말의 분산 정도, 결합제의 종류, 그리고 고형분말 함량이 미치는 영향을 관찰하였다. 구형의 과립은 복합분말 슬러리가 완전 분산이 되지 않고 약간의 floc을 형성하고 결합제로서 Polyvinyl Pyrrolidone(PVP)을 사용했을 때 얻어졌다. PVP를 결합제로 사용하고 분말함량이 32.5 vol%인 슬러리로 분무건조한 분말은 성형시 과립경계면이 파괴되어 소결밀도는 99.7%이었고 굴곡강도는 850Mpa이었다.

• 한국세라믹학회지
• /
• 제33권5호
• /
• pp.602-615
• /
• 1996

The purpose of the present study is to investigate the microstructural effect on the R-curve behavior in three aluminas with different grain size distributions by analyzing the bridging stress distribution. The crack opening displacement (COD) according to the distance behind the stationary crack tip was measured using an in situ SEM fracture method. The measured COD values in the fine-grained alumina agreed well with Wiederhorn's sollution while they deviated from Wiederhorn's solution in the two coarse-grained aluminas because of the increase of the crack closure due to the grain interface bridging in the crack wake. A numerical fitting procedure was conducted by the introduction of the power-law relation and the current theoretical model together with the measured COD's in order to obtain the bridging stress distribution. The results indicated that the bridging stress function and the R-curve computed by the current model were consistent with those computed by the power-law relation providing a reliable evidence for the bridging stress analysis of the current model. The strain-softening exponent in the power-law relation n, was calculated to be in the range from 2 to 3 and was closely related to the grain size distribution. Thus it was concluded from the current theoretical model that the grain size distribution affected greatly the bridging stress distribution thereby resulting in the quantitative analysis of microfracture of polycrystalline aluminas through correlating the local-fracture-cont-rolling microstructure.

• 한국기계가공학회지
• /
• 제11권1호
• /
• pp.13-19
• /
• 2012

In this study, ultrasonic vibration tool designed and made by using FEM analysis. And machining test was carried out in various machining conditions using ultrasonic vibration capable CNC machine. For work material, alumina ceramic ($Al_2O_3$) was used while for tool material diamond electroplated grinding wheel was used. To evaluate ultrasonic vibration effect, grinding test was performed with and without ultrasonic vibration in same machining condition. In ultrasonic mode, ultrasonic vibration of 20kHz was generated by HSK 63 ultrasonic actuator. The two grinding speeds, 1.67m/s and 3.35m/s, were applied. On the other hand, grinding forces were measured by KISTLER dynamometer.

• 한국세라믹학회지
• /
• 제40권7호
• /
• pp.662-666
• /
• 2003

인공치관용 알루미나-유리 복합체를 유사 구강분위기인 인공타액 하에서 200-1000 N의 하중 조건으로 $10^{6}$ 횟수까지 헤르찌안 반복하중 피로특성을 조사하였다. 200 N의 하중에서 $10^{6}$까지 반복피로 실험결과, 강도 저하 및 균열 현상은 관찰되지 않았다. 하중이 1000 N으로 증가함에 따라 링 균열에서 방사상 균열로 전이되었을 때 급격한 강도 저하 현상이 발생하였다. 강도 저하 현상은 유사 구강 분위기하에서 반복 하중 접촉 시 발생한 방사상 균열을 통해 침투한 인공타액과 유리상의 화학적 반응으로 더욱 가속화 되었다.

• 한국레이저가공학회지
• /
• 제18권4호
• /
• pp.17-22
• /
• 2015

In this paper, ablation rate of $Al_2O_3$ ceramics by femtosecond laser fluence is derived with experimental method. The automatic three axis linear stage makes laser optics to move with high spatial resolution. With 10 times objective lens, minimal pattern width of $Al_2O_3$ is measured in the focal plane. Ablated surface area is shown as linear tendency increasing number of machining times with various laser power conditions. Machining times is most sensitive condition to control $Al_2O_3$ pattern width. Also, the linear increment of pattern width with laser power change is investigated. In high machining speed, the ablation volume rate is more linear with fluence because pulse overlap is minimized in this condition. Thermal effect to surrounding medium can be minimized and clean laser process without melting zone is possible in high machining speed. Ablation volume rate decelerates as increasing machining times and multiple machining times should be considered to achieve proper ablation width and depth.

• 한국해양공학회지
• /
• 제10권2호
• /
• pp.88-97
• /
• 1996

The pupose of this study is to improve the mechanical properies and to evaluate the residual stresses of flame-sprayed Alumina ceramic coating layer. The first work in this study is to investigate the effects of strengthening heat treatments on the mechanical properties of coating layer. Strengthening heat treatments for sprayed specimens were carried out in vaccum furnace. The mechanical properties such as microhardness, thermal shock resistance, adhesive strength and erosion resistance were tested for the sprayed specimens after strengthening heat treatments. And it was clear that the mechanical properties of coating layer were much improved by strengthening heat treatments. The second work in this study is to evalute the residual stresses in coating lsyer by numerical analysis. FDM and FEM were used to analyze temperature distribution and residul stresses in coating layer. It was proved that are tensile stresses in coating layer and that residual stresses can be controlled by the appropriate selection of the spraying parameters such as preheat temperature, coating thickness and bond coat thickness.

• 한국세라믹학회지
• /
• 제38권5호
• /
• pp.479-484
• /
• 2001

고순도 알루미나 분말에 소결조제로서 MgO를 0ppm 및 500ppm 첨가하여 열분무건조기를 사용하여 준비한 과립을 80$0^{\circ}C$에서 하소를 함으로써 얻어진 과립으로 제작한 소결체의 MgO 첨가량에 따른 미세구조와 꺾임강도에 미치는 영향을 고찰하였다. 또한 시편두께를 50$mu extrm{m}$의 박편으로 가공하여 투광법으로 내부구조도 관찰하였다. MgO를 500ppm 첨가하여 제작한 과립을 180 MPa의 냉간정수압성형성 후 1$600^{\circ}C$에서 소결한 소결체는 상대밀도가 100%에 도달하였고 균일한 결정립성장의 치밀한 미세구조를 나타내었다. MgO를 500ppm 첨가한 시편의 4점 꺾임강도 또한 각 소결온도에서 MgO를 9ppm 첨가한 시편보다 23%-32%정도 높은 강도를 나타내었으며, 특히 소결온도 1$600^{\circ}C$에서는 꺾임강도가 501MPa 그리고 weibull 계수가 20의 고강도이면서 신뢰성이 높은 알루미나 소결체가 얻어졌다. 본 연구에서는 weibull 계수의 값이 높은 시편일수록 내부구조의 결함크기가 작고 이 작은 결함이 시편내부에 균일하게 분포되어 있음을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제40권3호
• /
• pp.293-300
• /
• 2003

알루미나 분말과 전해질의 농도가 제타전위 및 등전점에 미치는 영향에 대하여 고찰하였다. 0.1~l $\mu\textrm{m}$의 입도 범위를 지닌 알루미나 분말시료와 NH$_4$NO$_3$를 사용하여 실험을 수행하였으며, 전기영동법을 이용하여 제타전위를 측정하였다. 현탁액 내의 시료량이 증가할수록 제타전위와 등전점은 큰 값을 나타내었으며, 현탁액의 농도가 0.0l wt%일 때 제타전위 측정에 가장 적합한 것으로 나타났다. 또한 전해질 농도가 증가할 경우, 제타전위의 값은 다소 증가하는 경향을 보였으나 큰 변화는 없었고, 등전점 값은 오히려 조금 감소하였다. 제타전위 측정에 가장 적합한 전해질 농도는 10 mM인 것으로 나타났으며, 전해질의 종류에 따라서 제타전위와 등전점의 값이 조금 변하는 경향이 있으나 큰 차이를 발생시키지는 않는 것으로 확인되었다.

• 한국세라믹학회지
• /
• 제37권7호
• /
• pp.638-644
• /
• 2000

The sintering behaviors of the glass-alumina composites for low firing temperature were investigated as functiions of the volume fraction of alumina powder and the particle size with respect to porosity and pore shape. As the volume fraction of alumina powder was increased or the particle size of it was decreased, the sintering temperature of open pore-closing was raised. When the volume fractions of alumina which had 2.19$\mu\textrm{m}$ median diameter were increased with 20, 30, 40, and 50%, the sintering temperatures of open pore-closing were 425, 450, 475, and 500$^{\circ}C$. And when the median particle size of alumina was diminished from 2.19$\mu\textrm{m}$ to 0.38$\mu\textrm{m}$, the sintering temperature of open pore-closing was increased from 450$^{\circ}C$ to 475$^{\circ}C$. Especially, the sintering temperature, which showed maximum density, was corresponded with the stage of open pore-closing and after achieving maximum density over heating resulted in dedensification of specimen, so called, over-firing behavior.