• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.5
• /
• pp.458-464
• /
• 2016

This paper proposes the compensation method which decreases the radiation pattern distortion caused by the mutual coupling in an array antenna. If the element distance of an array antenna decreases, the radiation pattern could be distorted by the strong mutual coupling, which changes the magnitude and phase of input signals and causes an unwanted radiation pattern. To remove the pattern distortion, compensated input signals are inserted in an array antenna. The magnitude and phase of input signals are determined by Particle Swarm Optimization (PSO) algorithm. A $4{\times}1$ dipole array antenna with omnidirectional elements is used to confirm the validity of the algorithm, where each element is placed in 0.2 wavelength to evoke the strong coupling. After input signals are optimized by PSO, it is found that the compensated radiation results in the same as the ideal case.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4537-4542
• /
• 2010

In this paper, the antenna radiation pattern inside the vehicle is presented for observing the change occurring in non-anechoic environment using monopole antenna. The environment for radio communication can be affected by antenna characteristic variation inside the small space existing multi reflection waves. To perform simulation and measurement about antenna radiation pattern, the radio frequency bands for GPS and Wibro services expected to use inside the vehicle is selected. The simulation is based on the ray-tracing method and the radiation pattern is measured inside the vehicle and in free space using monopole antenna having those frequency bands. In accordance with the measurement and simulation results, when two antennas are put inside the vehicle, the omni-directional characteristic of the antenna is maintained but the received power is increased than free space case and the difference between the each case of measurements is increased as the operating frequency is increased.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.154-155
• /
• 2010

본 논문에서는 end-fire 방사패턴 특성을 가지는 2.4GHz ISM 밴드용 소형 open-end slot 안테나를 설계하였다. 안테나 설계 공간은 $23mm{\times}15mm$의 좁은 영역으로 한정된 공간 내에 안테나를 설계하기 위하여 한번의 Bent된 slot을 도입하였고, End-Fire 방사특성을 내기위해 안테나 수평면상의 위쪽 방향으로 slot을 open시킨 구조이다. Bent된 slot을 이용해 전체 slot의 길이를 변화시키지 않고 주파수의 조절이 가능하고, Feeding Line의 길이와 폭을 조절하여 보다 광대역의 특성을 얻을 수 있었다. 제작된 안테나의 공진 주파수는 2.46GHz이고 대역폭은 2.4GHz~2.61GHz 까지 약 210MHz(VSWR<2) 이다. 방사패턴은 동작 주파수 내에서 slot이 open된 방향으로 end-fire특성을 가지고, 안테나의 이득과 효율은 각 각 1dBi, 70% 이상의 성능을 가진다. 설계 결과의 검증을 위해 모의실험 결과와 측정 결과를 비교하여 제시하였다.

• Smart Media Journal
• /
• v.4 no.4
• /
• pp.64-69
• /
• 2015

In this paper, we have proposed a tapered slot antenna for UWB communication system. The tapered slot antenna has directional radiation and broad bandwidth. Proposed tapered slot antenna is designed using Ansys Inc. HFSS and its VSWR, return los, and radiation pattern is analyzed. Operating band of the antenna were satisfied -10 dB S11 and $VSWR{\leq}2$ in 2.7 ~ 4.8 GHz band. The radiation pattern of the antenna is showed in E-plane (YZ plane) and the H-plane (XZ plane) and the highest gain of 7.3 dBi is seen at 4.5 GHz. Therefore, proposed tapered slot antenna has wide bandwidth characteristic and directional for location awareness.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.642-646
• /
• 2016

A wearable antenna made using conductive tape on paper is presented in this paper. The proposed antenna is composed of a half-wavelength conducting dipole strip and a parasitic conducting strip on the A4 copy paper. The antenna is fed at the center of the dipole strip by an SMA connector. The configuration of the proposed antenna changes according to the origami method. Therefore the radiation patterns of the antenna vary according to whether or not the paper is folded. This approach solves the problem that the reception ratio of the signal decreases because of null points in the antenna radiation pattern. The reflection coefficient and the radiation pattern of the proposed antenna at 900 MHz are evaluated using an EM simulation and measurements. It was shown that the proposed paper antenna has reconfigurable characteristics at 900 MHz when utilizing the origami method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.1018-1024
• /
• 2001

In this paper, an array antenna is designed far base station of a street micro-cell in urban areas. It has a rectangular radiation pattern. The current distribution of the array is decided by using a modified Woodward-Lawson sampling pattern synthesis method. To confirm the realization of the array antenna with rectangular pattern, 12 array antenna with a planar type monopole fed by stripline is fabricated and measured. In the results of the measured values, H-plane pattern of the antenna nearly yields a rectangular radiation pattern.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.95-110
• /
• 2012

The effect of a finite substrate size on the radiation characteristics of a two-element linear E-plane array antenna using microstrip patch antennas is investigated. The average active element pattern characteristics of two-element E-plane array antennas printed on different dielectric constant substrates with various substrate sizes and element spacings are analyzed. Using the average active element pattern, the radiation pattern characteristics of the array antenna versus scan angle is analyzed. The simulation results show that the diffracted fields of surface waves from substrate edges have a significant effect on the radiation characteristics of a 2-element E-plane array antenna. The distance between the center of patch antenna and the substrate edges on the E-plane for the enhancement of radiation characteristics of the array antenna is about $0.35{\lambda}_0$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.397-405
• /
• 2004

In this paper, performance analysis of mobile phone with internal antenna for PCS band was carried out. The radiation patterns for antenna and mobile phone with internal antenna were simulated by using 3D simulation program, HFSS and SEMCAD. Radiation pattern variation was observed according to installation of LED circuit and ground pattern and by using simulation radiation pattern was improved. And radiation patterns of mobile phones with internal and external antennas were measured by using for field measurement system and chamber. Measured radiation pattern for mobile phone with internal antenna shows good agreement with simulation result. And the radio sensitivities of mobile phones with internal and external antennas were measured by using Agilent E5515C and chamber and compared. The measured radio sensitivity of mobile phone with internal antenna shows proper performances comparable to other model with external antenna. Measured result shows that the difference on averaged co-polar radio sensitivity is 0.12 ㏈.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.94-102
• /
• 2013

We propose the mirror active element pattern (AEP) method for the radiation pattern computation of linear array antennas versus scan angles. The computation time for the radiation pattern of linear array antennas using the mirror AEP method is reduced by almost half compared to that using the AEP method because the number of AEPs of elements obtained by the full-wave simulation necessary for the radiation pattern computation of linear array antennas is reduced by almost half. The difference between the radiation patterns of linear array antennas obtained by the full-wave simulation and mirror AEP method is very small for wide scan angle range when the radiation pattern of an antenna element is symmetric.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5447-5451
• /
• 2012

This paper presents a pattern-switchable microstrip patch antenna with loop structure. The loop structure for switchable radiation beam pattern is connected with feeding line of the microstrip patch antenna. As changing switch on/off state, the radiation beam pattern can be changed. The target frequency is 2.4 GHz and maximum radiation gain is 3.2dBi. The proposed antenna is useful for diversity antenna and smart antenna in modern wireless communication including MIMO (Multi-Input Multi-Output) and WLAN system. The sizes of the rectangular patch and the ground plane are $28mm{\times}28mm$ and $40mm{\times}50mm$, respectively. The simulation and experimental results show that the antenna radiation pattern can be changed with switch on/off configuration.