• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.3
• /
• pp.264-270
• /
• 2010

Waste activated sludge from sewage treatment plants mainly consisted of flocs of bacterial cell, and thus hard to be stabilized anaerobically due to rigid cell walls. One of the pretreatment methods to overcome this barrier is the venturi cavitation system (VCS) adopting hydrodynamic cavitation. This research was conducted to investigate the effects of the pretreatment of waste activated sludge by VCS on the anaerobic digestibility. Depending on the pretreatment period with the VCS, methane production, COD removal and VS removal efficiency increased 41%~45%, 36.5%~43.1% and 18.4~24.1%, respectively, compared to the control case. The increase in methane production from digester was 3.3~4.2 times higher than the theoretical methane potential of the increased SCOD after the VCS pre-treatment. This suggests that the VCS pre-treatment not only increases SCOD but also improves the digestibility of solid fractions. The energy mass balance indicated that the energy consumed for sludge pre-treatment could be recovered by the increased methane production after pre-treatment, suggesting the high potential for field application.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.1
• /
• pp.21-26
• /
• 2002

The behavior of the biological water treatment process on start-up operation was evaluated in the integrated recirculating aquaculture system consisting of a double drain type rearing tank ($2.5 m^3$), a sedimentation tank, a floating bead filter, a foam separator and a rotating biological contactor. A system was stocked with nile tilapia (Oreochromis niloticus) at an initial rearing density of $2\%$ for 2 weeks for acclimated rotating biological contactor. The total ammonia nitrogen (TAN) level increased to $13.6 g/m^3$ on day 4 after adding feed and was decreased to $0.3 g/m^3$ on day 7. The total suspended solid was completely removed during overall experimental period.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.4
• /
• pp.339-350
• /
• 2003

Engineering qualification model payload for a communications and broadcasting satellite(CBS) was developed by ETRI from May, 2000 to April, 2003. For. the purpose of functional test and verification of the payload, a real-time hardware-in-the-loop(HITL) CBS simulator(CBSSIM) was also developed. We assumed that the spacecraft platform for the CBSSIM is a geostationary communication satellite using momentum bias three-axis stabilization control technique based on Koreasat. The payload hardware is combined with CBSSIM via Power, Command and Telemetry System(PCTS) of Electrical Ground Support Equipment(EGSE). CBSSIM is connected with PCTS by TCP/IP and the payload is combined with PCTS by MIL-STD-1553B protocol and DC harness. This simulator runs under the PC-based simulation environment with Windows 2000 operating system. The satellite commands from the operators are transferred to the payload or bus subsystem models through the real-time process block in the simulator. Design requirements of the CBSSIM are to operate in real-time and generate telemetry. CBSSIM provides various graphic monitoring interfaces and control functions and supports both pre-launch and after-launch of a communication satellite system. In this paper, the HITL simulator system including CBSSIM, communications payload and PCTS as the medium of interface between CBSSIM and communications payload will be described in aspects of the system architecture, spacecraft models, and simulator operation environment.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.1
• /
• pp.9-13
• /
• 2016

Micelles, which are called solubilization formulation, have been widely used in skin lotion, mist or various formulations for the purpose of solubilizing the fragrance rather than the role of the active ingredient carrier because the particles are very small. In this study, we developed the swollen micelle having a transparent appearance to deliver ${\beta}$-sitosterol. When preparing the swollen micelle, solubility parameter was considered with active ingredient. This method allowed insoluble active ingredient to be safely entrapped inside the micelles. Stability of micelle was evaluated by dynamic light scattering (DLS). The transparency and shape of the micelles were confirmed by cryo-TEM. In addition, through the thermal analysis using DSC, ${\beta}$-sitosterol was found to be stably present in the swollen micelles. These results indicate that swollen micelles considered solubility parameter could be used as a new carrier for the insoluble active ingredients.

• Journal of Technology Innovation
• /
• v.22 no.4
• /
• pp.165-198
• /
• 2014

The national R&D performance evaluation system in Korea has been influenced by 'New Public Management' since the 1980s. The 1997 IMF crisis in Korea has necessitated the overhaul of S&T policy strategies in Korea. Reflecting this, effective distribution and utilization of S&T investment and resources has emerged as a crucial policy agenda, while expansionary investment in S&T maintained. During the period of 1999-2005, the R&D evaluation has been more focused on the input side and execution processes than on the results of R&D. Evaluation results were to be reflected in the budgeting of national R&D, but there were some disputes over how to make use of evaluation results between the budgeting ministry and the evaluation agency partly because they were two separate entities. After the advent of the new government(1998-2003) which advocated 'science and technology-oriented society', the national R&D evaluation system has evolved through a new legislation, the Performance Assessment Act, and the establishment of Science & Technology Innovation Agency to build up the unique framework for national R&D evaluation differentiated from the assessment system for general government investment programs. Most recently, due to 'Comprehensive Improvement Plan' in 2013, various components of national R&D evaluation seem to move on a new evolutionary track. For example, different types of evaluation are being developed and tried in accordance with differing evaluation goals, and the individual ministries and the research councils has got more enhanced autonomy and responsibility regarding R&D evaluation. So-called 'tailored' evaluation methods, taking into consideration the characteristics of programs and institutes / organizations to be evaluated, are now being tried. Competences of evaluation experts and agencies has also to be improved and strengthened.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.2
• /
• pp.53-65
• /
• 2012

This study was focused on removal efficiency of complex (or mixed) wastewater from agricultural and industrial plant for advanced treatments by HBR-II process, that was well known to be suitable to the treatment of livestock wastewater. The main purpose of this study was intended to evaluate the applicable feasibility of the HBR-II for revamping the present activated sludge process to the advanced one. And also, the settling study including the batch typed experimental column tests was performed to evaluate the coagulation stability of organic colloidal particles in wastewater. The mid-scale plant of HBR-II process between pilot and laboratory was used for this study. As F/M ratio remains constant in the range of 0.20~0.25 $BOD_5/Kg{\cdot}MLSS/Day$, the efficiency of biological treatment increased. It has been shown that the results of biodegradation study were, for removal efficiency(%), $BOD_5$ 98.4%, $COD_{Mn}$ 92.9%, SS 97.5%, T-N 91.3%, T-P 82.3%, respectively, which were relatively higher than other processes. From this study, HBR-II process would be well applied to the biological treatment of agricultural and industrial complex wastewater.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.8 s.111
• /
• pp.773-787
• /
• 2006

An airborne radar is an essential aviation electronic system for the aircraft to perform various civil and/or military missions in all weather environments. This paper presents the design, development, and test results of the multi-mode X-band pulsed Doppler radar system test model for helicopter-borne flight test. This radar system consists of 4 LRUs(Line-Replacement Unit), which include antenna unit, transmitter and receiver unit, radar signal & data processing unit and display Unit. The developed core technologies include the planar array antenna, TWTA transmitter, coherent I/Q detector, digital pulse compression, MTI, DSP based Doppler FFT filter, adaptive CFAR, moving clutter compensation, platform motion stabilizer, and tracking capability. The design performance of the developed radar system is verified through various ground fixed and moving vehicle test as well as helicopter-borne field tests including MTD(Moving Target Detector) capability for the Doppler compensation due to the moving platform motion.

• Journal of Distribution Research
• /
• v.16 no.5
• /
• pp.1-18
• /
• 2011

Local assemblers of agricultural products perform important distribution functions such as providing sales outlets, labor forces, market information, and financing, forward contracting, farming, physical distribution, and etc. However, their business activities are not transparent and producers are not effectively protected from unfair practices done by local assemblers. In order to enhance transparency and to increase effectiveness of governmental policies, local assemblers, which are mostly private management, should be organized as corporations. In order to organize corporations, the government should emphasize the importance of education and should provide corporations with governmental funds for improvement of agricultural distribution. Corporations should be developed to marketing cooperatives in the long run, and are requested to form their federations. It is also necessary to have transparent forward contracting system by local assemblers. In order to have transparent system, producers and local assemblers are guided to use standard contract forms and to operate offices handling unfair trade practices by local assemblers. We also need a place to exchange forward contracts, which can be developed to a futures market in the long run. In summary, local assemblers of agricultural products, which are mostly private management, should be developed to corporations and be operated by a transparent manner in order to protect agricultural producers and increase efficiency of trading.

• Korean Journal of Food Science and Technology
• /
• v.22 no.1
• /
• pp.1-6
• /
• 1990

The thermal diffusivity of defatted and nondefatted starches were measured on the basis of one dimensional semi-infinitive theory. Differential scanning calorymetry was used to study the effects of cooling rate, fat and water contents on the enthalpy and entropy changes with the cooling rate of $-2.5{\sim}10^{\circ}C/min$. Thermal diffusivity of defatted and nondefatted straches were determined to be $4.14{\times}10^{-4}{\sim}4.96{\times}10^{-4}(m^2/h),\;4.09{\times}10^{-4}{\sim}4.81{\times}10^{-4}(m^2/h)$ in unfrozen state, and $2.78{\times}10^{-3}{\sim}3.91{\times}10^{-3}(m^2/h),\;2.26{\times}10^{-3}{\sim}3.57{\times}1-^{-3}(m^2/h)$ in frozen state respectively. On decreasing temperatures in frozen state, thermal diffusivities of starches were increased and entropy and enthalpy were decreased, and more rapid cooling rates resulted in a decrease in entropy. A linear relation was observed between enthropy, enthaly and water content. Thermal diffusivity was decreased, and entropy was increasing fat content. With water content ranging from 35 to 90%, enthalpy and entropy of straches were found to be $107{\sim}216 (kcal /moi),\;0.45{\sim}0.94(kcal/mol.\;K)$, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.3
• /
• pp.78-88
• /
• 2014

Now, UTIS collects and provides traffic information by building RSE 1,150(unit) and OBE about 51,000(vehicle). it's inevitable to enlarge traffic information sources which use to improve quality of UTIS traffic information for Stabilizing UTIS's service. but there are missing data sections. And, In this study as a way to overcome these problems, based on BIS(Bus information system) installed and operating in the capital area to develop normal vehicle's link transit time estimation model which is used realtime collecting BMS data, we'll utilize the model to provide missing data section's information. For these problem, we selected partial section of suwon-city, anyang-city followed by drive only way or not and conducted model estimating and verification each of BMS data and UTIS traffic information. Consequently, Case2,4,6,8 presented highly credibility between UTIS communication data and estimated value but In the Case 3,5 we determined to replace communication data of UTIS' missing data section too hard for large error. So we need to apply high credibility model formula adjusting road managing condition and the situation of object section.