• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.111-114
• /
• 2003

In this paper, we consider the stabilization and $H_\infty$ control of linear systems with static output feedback control. The static output feedback control represents the simplest closed-loop control that can be realized in practice, and, moreover, it is less expensive to be implemented and is more reliable. In spite of its advantages, it is one of the open problems which is not sloved analytically or numerically yet. After decompose the closed-loop system into feedback form, by adopting the small gain theorem, we obtain a sufficient condition for stabilization and a sufficient condition for It control expressed as linear matrix inequalites. Finally, we show the usefulness of our results by a numerical example.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1998.04a
• /
• pp.147-148
• /
• 1998

• Resources Recycling
• /
• v.28 no.3
• /
• pp.35-44
• /
• 2019

In this study, we conducted experiments to store $CO_2$ and produce $CaCO_3$ through indirect carbonation using paper sludge ash (PSA) and three chelating reagents (fumarate, IDA and EDTA). Fumarate and IDA used as solvents could facilitate the indirect carbonation reaction to store more $CO_2$ than water. When 0.1 M fumarate and IDA were used, $CO_2$ storage was 63 and $89kg-CO_2/ton-PSA$, respectively, and $CaCO_3$ yield was 144 and $202kg-CaCO_3/ton-PSA$. For the case of EDTA, however, the carbonation was hardly progressed. As either the concentration or Ca-ligand stabilization constant of each chelating reagent increased, the calcium extraction efficiency from PSA increased. In addition, the carbonation efficiency was influenced by the Ca-ligand stabilization constant. As the Ca-ligand stabilization constant increased, more calcium could be extracted from the PSA. With the constant larger than that of $CaCO_3$ ($10^{8.35}$), however, the carbonation reaction was not proceeded.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.105-112
• /
• 2005

Stabilizing and rousing sludge water generated from washing truck mixer and batcher plant can resolve inconsistency in quality and improve strength, therefore it is essential to review how to utilize it. This research conducted experiments and studied on solids of sludge water to find out the types of stabilizing agents available in conditions of producing ready mixed concretes in Korea. The result showed that oxy carboxylic acid retarder dedicated for stabilizing sludge water was most effective in decreasing solid. However, the setting time of cement paste was retarded due to surplus reactants, but it did not impede application of ready mixed concretes. When we left the sludge water mixed with stabilizing agent, it has been noted that initial retard effect recovered to the level using just service water in 7${\~}$8 days and that it is effective to use stabilized sludge water in 2${\~}$3 days. On the other hand, saccharic type super retarding agent was also outstanding in applicability by showing similar effect. The sludge water stabilizing agents currently marketed depend on imports, therefore it is necessary to locally manufacture usable stabilizing agents and to review its usability with multi-dimensional view.

• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.210-219
• /
• 1999

The fundamental dispersion property of Si2N4 and a combination of AlN and Nd2O3 as sintering additives in a variety of organic solvents such as alcohols, hydrocarbons, ketones, and ethers was investigated. The stabilization mechanism and interaction between organic functional groups of the various organic additives were studied to clarify the dispersibility of the ceramic particles in the nonaqueous suspending medium. characterization of the suspensions was based mainly on electrokinetic sonic amplitude(ESA) measurements and the flow curves obtained from the rheological studies as well as estimated Hamaker constants. It was found that the contribution of electrostatic repulsive forces to the Si3N4, AlN and Nd2O3 stabilization in organic media is appreciably greater than anticipated and is dependent on the physicochemical properties of organic solvents.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.213.1-213.1
• /
• 2015

Field effect transistors (FETs)를 기반으로 한 바이오센서는 빠른 응답속도, 저비용, label-free 등을 이유로 각광받고 있다. 그러나 3D 구조를 기반으로 한 FETs 바이오센서의 낮은 sensitivity의 한계점을 지니며, 이를 극복하기 위해 1D 구조의 나노튜브 등을 활용하였으나 여전히 높은 sensitivity의 확보는 힘들다. 최근에는 이러한 문제점을 극복하기 위해 이차원 반도체 물질 중 하나인 Transition metal dichalcogenide (TMD)를 이용하여, 700 이상의 sensitivity를 지니는 pH센서 및 100 이상의 sensitivity를 지니는 바이오센서가 보고되었다. 하지만 이보다 더 높은 정확성 및 반응성을 높이기 위한 연구는 부족한 실정이다. 우리는 DNA 템플릿을 이용하여, TMD FET 기반 pH 및 바이오센서의 반응성을 극대화시키는 연구를 선보인다. DNA는 7~8정도의 유전상수 (K)를 가지는 물질로 기존 $SiO_2$(K=3.9)보다 높은 유전상수를 가지며 두께를 0.7 nm로 매우 얇게 형성할 수 있는 장점이 있다. 이는 FET 기반 바이오센서의 표면 캐패시턴스를 높여 sensitivity를 극대화할 수 있으며, 기존에 사용된 high-k 기반 바이오센서와 비교하여도 약 10배 이상의 sensitivity 향상을 노릴 수 있다. 또한, TMD 물질로 우리는 $WSe_2$를 선택하였으며, pH 용액의 receptor로써 우리는 3-Aminopropyltriethoxysilane (APTES)를 활용하였고, 템플릿으로 사용된 DNA는 DX tile 및 Ring type의 두 가지를 사용하였다. 추가로, DNA의 phosphate backbone을 중성화시키고 DNA의 base pairing의 charge 안정화를 위해 구리 이온($Cu^{2+}$) 및 란타넘족($Tb^{3+}$)을 추가하였다. 완성된 바이오센서의 pH 센싱을 위해 우리는 pH 6,7,8의 표준 용액을 사용하였으며, 재현성 및 반복성의 확인하였다.

• Journal of the Korean Chemical Society
• /
• v.22 no.1
• /
• pp.7-11
• /
• 1978

The reactions of 2,4-dinitroiodobenzene with para subtituted anilines in acetonitrile-methanol binary solvent mixtures have been studied. Rate constants for reactions in methanol rich solvents are greater than for reactions in acetonitrile rich solvents. Kinetic results show that the bond formation step is rate determining in the solvent system studied. The solvent effect can be explained by stabilization of the transition state by formation of hydrogen bond between oxygen atom of methanol and hydrogen atom of aniline.

• Journal of the Korean Chemical Society
• /
• v.39 no.10
• /
• pp.776-782
• /
• 1995

A theory of the helix/coil transition for $\alpha$ helical dimer such as $\alpha$ tropomycin and paramycin is developed. The treatment differs from those formulated previously for oligopeptide dimer which is explained by the matrix method using Zimm-Bragg parameter: In the present treatement, it is explained by the zipper model which can account for the dangling H-bond. We calculate the fractional helicity in $\alpha$ helical dimer as a function of helix initiation $constant(\sigma)$, helix stability constant(${\xi}$) and hydrophobic interaction parameter(w). For $\alpha$ tropomycin, the helix stability profile is also calculated. The transitions of this oligomer due to the change of temperature and the concentration of oligopeptide involve simultaneous dissociation of the dimer. The transitions of dimers which have cross-linked S-S bonds or have long chains don't occur, because they keep always helical structures. The transitons due to the concentration of the oligopeptides are steeper than those due to the chain length or temperature.

• Journal of the Korean Chemical Society
• /
• v.24 no.4
• /
• pp.288-294
• /
• 1980

Methanolysis rate constants were determined for $CH_3O(CO)Cl,\;CH_3S(CO)Cl\;and\;CH_3S(CS)Cl\;in\;CH_3OH-CH_3CN$ mixtures. Results show that the rates are not predominantly influenced by the bulk solvent properties but are partly influenced by specific electrophilic solvation.Polarity of the solvent is not a dominant factor but it nevertheless plays a role in charge stabilization of the $S_N1$ like transition state. The methanolysis proceeds through $S_N1$ mechanism for $CH_3S(CS)Cl$ for which both specific solvation of leaving group by methanol and charge stabilization by a high dielectric medium are important, while for $CH_3O(CO)Cl\;methanolysis occurs\;via\;S_N2$ mechanism in which both of the solvent effects are unimportant.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.299-299
• /
• 2012

투명전도산화물 박막은 디스플레이, 태양전지, 압전소자 등 다양한 응용분야에 많이 이용되고 있는 소재이다. 그 중에서 현재 산업에서 활용 빈도가 높은 투명전도막의 재료는 ITO를 기반으로 하는 물질이다. 하지만 인듐의 높은 생산단가와 플라즈마 노출시 열화로 인한 문제점 때문에 기존의 ITO를 대체하기 위한 새로운 재료에 관심이 증대되고 있다. 본 연구에서는 대표적인 ITO 대체 물질 중의 하나인 ZnO 박막에 대해서 증착환경변화에 따른 물성변화를 조사하였다. 먼저 대기중에서 안정화된 ZnO 박막을 얻기 위해서 인(P) 2% 첨가된 ZnO 세라믹을 고상반응법으로 제작하고, 펄스레이저 증착법을 이용하여 Al2O3(0001)기판에 산소분압을 30~150 mTorr로 변화를 주어 P-ZnO 박막을 제작하였다. 이 때 증착온도는 $400^{\circ}C$로 고정하였다. X선 회절 결과로부터 산소분압에 상관없이 ZnO (002)방향으로 증착되었다. 하지만 결정립의 크기는 산소분압이 증가하면서 줄어들고, ZnO (002)피크로부터 얻어진 격자상수(c-축)는 벌크 값에 가까워짐을 알 수 있었다. 하지만 P첨가로 인해서 박막의 격자상수는 순수한 ZnO 벌크 값 보다 큰 것으로 알 수 있다. 산소분압 변화에 따른 P-ZnO 박막의 산화 상태는 X-선 광전자 분광기를 이용하여 측정하였다. 그 결과 산소 core-level의 스펙트럼은 자연산화, 산소 vacancy, Zn-O 결합으로 구성되어짐을 알 수 있었다. 산소분압이 증가하면 Zn-O 결합은 증가하지만 산소 vacancy는 감소함을 알 수 있었다. 전기적 특성 결과 P-ZnO 박막은 30 mTorr에서는 n형 반도체 특성, 100 mtorr에서 p형 반도체의 특성이 나타내었고, 산소분압이 증가하면 다시 n형 반도체 특성을 나타냄을 알 수 있었다. 광학적 특성 결과 P-ZnO 박막은 산소분압에 상관없이 가시광선 영역에서 80%이상의 투과율을 나타내었으며, 산소분압이 증가할수록 에너지 갭이 증가하였다.