• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.322-323
• /
• 2011

최근 풍력사업의 발전은 제주도의 풍부한 바람을 이용하고자하는 풍력사업자들에게는 새로운 기회로 다가오고 있다. 하지만 이미 계통조건을 고려한 풍력한계용량이 산정되어 많은 풍력사업자들에게 기회를 제공해주지 못하고 있다. 본 논문은 계통의 안정성을 해지치 않으면서 풍력설비용량의 한계를 증가 시킬 수 있는 방안을 모색하기 위함이다.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.11
• /
• pp.11-22
• /
• 2019

Limit state design (LSD) and allowable stress design (ASD) are two main types of soil nailing design methodologies. In the LSD method, stability is determined by applying individual coefficients to ground strength, working load and etc. The ASD method calculates the safety factor and compares it with the minimum safety factor to determine the stability. The global design trend of soil nailing system is changing from the ASD method to the LSD method. The design method in Korea still adopts the ASD philosophy while others mostly do the limit state design. In this study, four soil nail design methods, 'FHWA GEC 7' in U.S. (2015), 'Clouterre' in France (1991), 'Soil nailing - best practice guidance' in U.K. (2005), 'Geoguide 7' in Hongkong (2008), and 'Design guide for slope in construction work' in Korea (2016) were applied to the evaluation of the stability and the results were analyzed comparatively in brief. It is revealed that the design method of 'the overall stability of soil nail walls' in Korea is the most conservative and next those by FHWA, Clouterre and CIRIA become more conservative in order. However, the difference of results obtained from FHWA and Clouterre is negligible. Also, this study found out that efforts to improve domestic design criterion are needed.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.515-522
• /
• 2011

This study examined the epiphytes using stable isotopes. Separated epiphytes should represent the water quality. In study areas, where agricultural paddies were prevailing, biomass of epiphytes can increase nitrogen isotopes(${\delta}^{15}N$) and as a result decrease in carbon isotopes(${\delta}^{13}C$). Naerin stream and Inbuk upper areas showed higher nitrogen isotopes(${\delta}^{15}N$) than in Hangye and Buk stream. Also, stable carbon isotopes(${\delta}^{13}C$) in Naerin stream and Inbuk streams tended to increase than in Hangye and Buk stream. This can indicate the epiphytes can be a good indicator for water quality pollution.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.587-590
• /
• 2007

한계자기회귀모형(TAR)을 응용하여 동시에 해조와 홍수의 영향을 받을 때 삽교천 감조구간의 삽교호수위관측소의 월 최고수위를 예측하는 모형을 구축하였으며, 모형구축과정에서 유전알고리즘으로 한계값과 자기회귀계수의 매개변수를 최적화한다. 계산결과 한계자기회귀모형은 감조하천의 비선형성특성을 모의 할 수 있으며, 예측의 정확도와 예측성능의 안정성을 확보할 수 있다. 연구결과 유전한계자귀회귀모형으로 감조하천구간의 월 최고수위를 예측하는 것이 가능하며, 또한 감조하천구간에서 기타 수문요소의 비선형성 서열예측 중에서도 광범한 실용가치가 있다고 본다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.4
• /
• pp.73-86
• /
• 1998

The purpose of this paper is to evaluate the shear stiffness, hysteretic behavior, and ultimate behavior of HDRB(High Damping Rubber Bearing), which will be included in the seismic isolation design guideline as requirements. To do this, two 1/8 scaled HDRB are designed, fabricated, and tested to show the mechanical characteristics. The shear stiffness obtained from the proposed equation of the shear stiffness shows a good agreement with those of the experiments. For analysis of the hysteretic behavior of HDRB using the modified rate model, the parameter equations are obtained from the experiments. Using the obtained parameter equations for the modified rate model, the seismic response analyses are carried out for 1-D system. The results of analysis well follow the hysteretic behavior of HDRB obtained from the experiments. To evaluate the ultimate behavior of HDRB used in this paper, the analyses are carried out using the modified macro model, which can consider the large shear deflection. The critical shear strain(CSS) is defined to express the maximum allowable shear strain and vertical load. From the analyses, the CSS, showing the instability, decreases significantly as increased the vertical loads. The CSS is not appeared for the design vertical load in the used HDRB. In analysis using about 5 times of design vertical load, the HDRB start to show the instability transient and for about 7 times, the CSS is about 350%.

• Tunnel and Underground Space
• /
• v.17 no.6
• /
• pp.503-510
• /
• 2007

Rock classification schemes such as RMR, Q-system were applied to investigate the stability of large-scale gangways mined in a limestone mine. 22 areas for engineering geological surveys were selected and rock classifications at each survey point had been carried out. Considering the fact that the observed gangways have not experienced some severe failure and have been stably maintained till now, it is found that Q-system is more reasonable than RMR in evaluating the stability of unsupported span. Also, extended Mathews stability graph method which is a kind of revised Q-system was used to assess the stability of gangways and the results represent that all gangways except for one area are under stable condition. Based on above the mentioned results, the empirical equations to design the maximum unsupported span and critical height of a large-scale gangway are suggested.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.1
• /
• pp.11-18
• /
• 2009

This paper presents a comparative study of reinforced soil slope by using LEM and SSR-FEM. Current analysis methods for reinforced soil wall are based on LEM. SSR-FEM assumes a reduction of soil strength by a factor to reach a critical state prior to failure based on continuum mechanics. In this study the comparisons are concerned with the factor of safety and the potential failure surface in reinforced soil wall. We investigated the stability of the reinforced soil wall with a slope of $60^{\circ}$ by LEM and SSR-FEM. The comparisons indicated good performance of the SSR-FEM on stability analysis of reinforce soil wall.

• The Journal of the Korean dental association
• /
• v.35 no.9 s.340
• /
• pp.615-617
• /
• 1997

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.76-79
• /
• 2006

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.129-138
• /
• 2008

In case of judging the stability of dike or dam structures which need hydraulic interception, the first thing to do is to examine whether a piping phenomenon occurred or not. Generally, dike or dam structures are constructed while layer compacting is executed, so permeability is likely to be anisotropic- different from each other in hydraulic conductivity in the horizontal direction [$k_x$] and hydraulic conductivity in the vertical direction[$k_y$]. This study looked into exit hydraulic gradient and Seepage velocity by conducting an Seepage analysis subsequent to various hydraulic conductivity ratios[k-ratio = ky / kx] and examined the influence on piping by comparing & examining critical Seepage Velocity based on critical hydraulic gradient in theoretical equation and critical Seepage Velocity in empirical equation. As the research result, it was found that hydraulic conductivity ratio operates as a very important factor in case the stability against piping occurrence is considered with the concept of critical hydraulic gradient, but relatively the hydraulic conductivity ratio is very low in its importance in relation to the concept of critical Seepage Velocity.