• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.11
• /
• pp.801-807
• /
• 2022

In this paper, we propose an ultra compact S-Band PCM/FM telemetry transmitter. The equipment is compact, so it can be applied to a limited space and capable of stable data transmission was designed and manufactured even with specifications set differently for each operating environment and system. RF direct conversion structure is used for the miniaturization of equipment, an RF transmission board, Power distribution board, and a signal processing board were implemented on a single PCB, so that the function of the transmitter could be performed with a minimum device. According to the target specification, variable output of 1~10W and variable data rate of 390kbps~12.5Mbps is possible in S-Band(2,200~2,400MHz) without degradation of performance. To verify the performance of the equipment, the RF performance test and BER measurement test were performed after the equipment was manufactured. It was confirmed that the OBW, null-to-null bandwidth, 1st IMD, Spurious emission, Phase noise specification of the PCM/FM modulated signal which is presented by the IRIG standard were satisfied, and we can confirm the data received using the transmitter inspection equipment were transmitted normally without distortion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.227.1-227.1
• /
• 2016

플라즈마 방출광 진단법은 플라즈마에 특별한 영향을 주지 않으면서도 진단 정보를 안정적으로, 지속적으로 취득할 수 있는 우수한 진단 방법이다. 이러한 분광 진단의 신뢰성을 확보하기 위해서는 방출광의 정확한 측정과 해석이 중요하다. 방출광의 측정에 이용되는 분광 장비는 모노크로메터(monochromator)와 소형 스펙트로메터(spectrometer)가 주로 사용된다. 스펙트로메터의 경우 모노크로메터보다 분광 성능은 다소 부족하지만 가볍고 작은 크기로 인해 장비의 설치가 용이하고 가격이 저렴하다는 장점이 있다. 또한 모노크로메터에 비해 분광 성능이 낮은 대신 넓은 범위의 파장을 동시에 측정할 수 있는 장점이 있다. 따라서 스펙트로메터는 플라즈마의 모니터링에 주로 사용된다. 그런데 스펙트로메터의 기기적 선폭 증대(instrumental broadening)보다 조밀하게 위치한 스펙트럼들은 서로 중첩이 일어나 진단이 어려워진다. 특히 분자 띠 스펙트럼(molecular band spectrum)과 같은 경우 선 스펙트럼들이 매우 밀집된 형태를 이루고 있어 범용적인 스펙트로메터로 진단하기가 어렵다. 이러한 문제점을 해결하기 위하여 합성 스펙트럼 해석법(synthetic spectrum method)을 이용할 수 있다. 본 연구에서는 수소 플라즈마의 Fulcher-${\alpha}$ 띠 스펙트럼 해석에 합성 스펙트럼법을 적용하여 분자의 회전 온도가 측정 가능한지 확인하고, 고성능의 모노크로메터를 이용한 온도 측정 결과와 서로 비교하였다. 그리고 분자의 진동 상태(vibrational state)가 분자 회전 온도 측정에 미치는 영향과 이에 따른 측정의 한계 등을 제시하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.151-154
• /
• 2019

국내 지상파 방송 3사는 세계최초로 2017년에 지상파 UHD 본방송 서비스를 시작하였다. 지상파 UHD 방송은 ATSC 3.0 표준 기반으로 단일주파수로 방송망을 구축할 수 있으므로 각 송신소별 커버리지 중첩지역에서 방송망을 효율적으로 설계하는 것이 필요하다. 또한, ATSC 3.0 송신 장비를 실 방송환경에서 운용하기 위해서는 H/S 와 같은 안정적인 형태로 장비가 구축되어야 한다. 본 논문에서는 2017년 수도권 UHDTV 본방송이 진행된 이후, KBS에 구축한 수도권 UHD-TVR 구축 과정과 수도권 UHDTV 방송망 분석을 위한 필드테스트 결과에 대해 살펴보고자 한다.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.2
• /
• pp.54-64
• /
• 2010

A spacecraft contends with various vibration from the launch to the on-orbit operation, which is one of the major considerations in spacecraft design. The weight reduction has been indispensable to decrease the launch cost, however it produces worse disturbances for the spacecraft equipments. Besides, the load requirements at observation payload interfaces have became severe to secure their pointing stability as their images are required with high resolution. As a possible solution, a vibration isolation system is introduced and it reduces the vibration from the launch vehicle or isolates the spacecraft equipments from their generating/transmitted vibration. In this paper, it is examined the design consideration needed for the accommodation of the vibration isolation systems through the survey of recent applications of vibration mitigation technologies to spacecrafts.

• The Journal of the Korea Contents Association
• /
• v.17 no.10
• /
• pp.334-342
• /
• 2017

Due to the development of telecommunication technology, the relay broadcasting system is changing rapidly. The introduction of the wireless mobile communication relay (DMNG) method has enabled the one-man relay, which has resulted in absolute reductions in terms of equipment and manpower. However, it is a reality that the basic level of broadcasting such as broadcasting stability and image quality is becoming less complete. This paper analyzes wireless telecommunication relay equipment and broadcasting system called 'backpack', and discusses future development plan. To do this, we analyze the success and failure cases of backpack relay broadcasting and present concrete plans.

• Convergence Security Journal
• /
• v.17 no.3
• /
• pp.3-9
• /
• 2017

NFV is a technology that allows network services to be controlled and managed in software by separating various net work functions (NFs) from hardware devices in dedicated network equipment and implementing them in a high-performance general-purpose server. Therefore, standardized virtualization of network functions is one of the most important factors. However, until the introduction of NFV to provide commercial services, there are many technical issues to be solved such as guaranteeing performance, stability, support for multi-vendor environment, ensuring perfect interoperability, and linking existing virtual and non-virtual resources. In this paper, we propose a method to provide an end-to-end network virtualization service based on OSM R2 in KREONET.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1012-1018
• /
• 2005

According as computer industry develops and the Internet is spread information interchange between remote users video conference system that can exchange multimedia data such as voice as well as simplicity text data or burn by real-time appeared and is used in various field. However, most systems developed present have controversial points of that need expensive multi-point connection equipment or network resource of High band width. Hereupon, in this paper, designed and embody video conference system that can be stable and supplies multimedia information and screen public ownership environment of high-quality as software using minimum network resource without using expensive connection equipment.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.147-157
• /
• 2003

The characteristics of a rock joint which influence the stability of rock mass structures such as cut slopes and tunnels are largely controlled by the conditions of the rock joint as well as its boundary conditions. The conditions of rock joints comprise asperity strength, roughness, and filling materials. Boundary conditions can be represented by assuming that the deformability(or stiffness) of the rock mass surrounding the joints is modelled by a spring with stiffness. A new direct shear apparatus was developed in this study, which adapts a servo control system using PID algorithm. This apparatus can be used to investigate the various aspects of shear characteristics of the rock joints at conditions of constant normal stress and constant normal stiffness and so on. The test results for saw-cut teeth joints show that shear strength should be evaluated by considering its specific boundary conditions far the design of tunnels and cut slopes.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1439-1441
• /
• 2004

ITS 데이터 통신체계는 도로상의 현장설비(차량 검지기. 도로전광표지, 번호인식장치 등)와 센터를 1:1로 직접 접속하는 방식(P2P)으로 구성하고 있다. P2P 데이터 통신은 안정적인 데이터 전송을 유지시켜주지만, 통신비용의 증가 원인이 되고 있다. 따라서. 본 연구는 1:1 유선통신 구성으로 인한 통신비를 줄이기 위해 위성통신을 사용하여 1:N 구성으로 통신비용을 줄이는 방법을 제안하였고. 적용 가능성을 확인하기 위해 국도 43호선 2개소에 대해서 옵셋 안테나. 위성송출장비 등의 위성통신 장비를 설치한 후 데이터를 수집하였다. 적용 주파수 대역은 $(TX)13.75\sim14.50GHz,\;(RX)10.70\sim12.75GHz$이다. 데이터 품질은 기존의 1:1 구성 방식인 유선 전용회선에 의한 데이터(기준치)와 제안한 위성통신의 데이터를 비교하는 과정이며, 이를 통해 위성통신의 현장 적용가능성을 검토하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.1
• /
• pp.49-56
• /
• 2016

Flapper Valve of Korean Utility Helicopter(KUH-1) is an essential equipment in Environmental Control System(ECS) for pilot to perform flight mission. It provides pilots and crews with heating, ventilating and air conditioning. It has function of maintaining room temperature to sustain operational capability for pilot and crew. This paper summarizes pilot comments in flight test which are classified by cause of occurrence and the troubleshooting process about each comment. It also describes design improvements which was derived from troubleshooting and suggests verification results of flight test at low temperature.