• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.215-215
• /
• 2014

현재 가장 많이 사용되고 있는 스프링식 안전밸브는 스프링과 설정치 드리프트, 누설 취약성, 채터링에 의한 시트 파손등의 문제점을 지니고 있다. 안전밸브 디스크에서 발생하는 유체 누설은 안전밸브 설정압력 개방에 영향을 주며, 시트(Seat)면의 이물질 삽입, 균열 및 유체에 의한 침식(Erosion) 등에 의해 밸브 핵심 부품이 쉽게 손상되어 기기 성능 저하를 초래하게 된다. 따라서 유체 누설을 조기에 탐지하고 정량화하여 해당 기기의 상태정보 제공을 통한 누설 감지 기법 연구가 요구된다. 원자력 발전소의 경우 밸브에서 유체가 누설되면 밸브의 오작동 및 운전 안정성 저해 요인이 된다. 따라서 본 연구에서는 음향방출법을 이용하여 안전밸브의 유체 누설을 평가하고, 안전밸브의 음향신호 측정 위치 선정 및 누설량에 따른 음향신호를 분석하고자 한다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.10a
• /
• pp.332-336
• /
• 2010

알람밸브는 습식 스프링쿨러 시스템에 필수적으로 사용되는 밸브로써 알람밸브의 오작동 및 고장 등은 치명적인 인명 및 재산의 손실을 가져 올 수 있으므로 소방밸브의 안전성 기준은 매우 높다. 이에 현재 제작되고 있는 알람 밸브는 강도 안전성 측면에서 매우 안전하게 설계가 되어있으며 주철 재질로 주물을 통해 제작된다. 하지만 이러한 과도한 안전설계는 오히려 과도한 무게의 부담으로 시스템에 무게 부담을 주기도 한다. 그러므로 본 논문에서는 밸브의 무게를 경감시키면서 충분한 강도안전성을 가지는 밸브의 설계안을 제시하고 유한요소 해석을 통하여 그 결과를 살펴보았다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.4
• /
• pp.19-25
• /
• 2007

A LNG safety valve functions to control a constant pressure inside the LNG line of transportation, and the flow through it accompanies with noise and vibration which affect adversely on the system. The present study aims at understanding the flow physics of LNG safety valve for a practical design of LNG safety valve. A computational work using the two-dimensional, axisymmetric, compressible, Navier-Stokes equations is carried out to simulate the gas flow through the LNG safety valve, and compared with the theoretical results. It is found that the shape of valve sheet and the gap size are the key parameters in determining the gas dynamic forces on the valve sheet, and there exists a distance between nozzle exit and valve sheet in which the thrust coefficient at the valve sheet increases abruptly.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.105-109
• /
• 2008

A safety valve has a valve mechanism for the automatic release of gas from piping system when the pressure exceeds preset limit cause of a defect of a pressure regulator, condensation of water in a pipe. Therefore, for the safety of pressure regulating station, it is essential to study the flow regime and characteristics of safety valve. This article presents the numerical analysis on the flow analysis, the ejection capacity and required effective discharge area of the safety valve that is established in pressure regulating station. Then, the results are compared and analyzed with domestic and foreign regulations such as API(America Petroleum Institute), EN(European Standard), and NF(Norme Francise). Moreover, the installation number of safety valve is considered by using domestic and foreign regulations and maximum reguired effective discharge area of safety valve.

• Journal of Energy Engineering
• /
• v.17 no.4
• /
• pp.212-217
• /
• 2008

This study carried out the safety evaluation of non-refillable butane can for portable gas range equipped with relief valve for prevention of explosion. The can is heated by electric heater at the real using condition and the extreme condition after installing at a portable gas range for checking the operating pressure and the evaluating suitability of releasing flux. And the possibility of fire or explosion was tested when the gas was released from the relief valve at the real condition. As a result of this safety evaluation test, a non-refillable butane can with relief valve prevents the can from exploding by control of internal pressure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.487-494
• /
• 2011

The safety valve used in LNG/LNG-FPSO ships plays an important role in maintaining a fixed level of pressure by emitting LNG gas out of the pipes in the LNG piping system. The discharge coefficient is regarded as the most important factor in the valve performance. To satisfy the ship's classification, the discharge coefficient of the safety valve must usually be over 0.8. Despite the importance of understanding the flow phenomena inside the safety valve, the valve design is usually based on experience and experiments. We carried out a computational fluid dynamics (CFD) investigation using the ANSYS-CFX software. We observed the flow phenomena inside the valve and measured the discharge coefficients according to changes in the valve lift, which is the distance between the exit of the nozzle and the lower part of the disc plate. We verified our CFD results for the discharge coefficients using available experimental data.

• Industry Promotion Research
• /
• v.2 no.1
• /
• pp.9-13
• /
• 2017

This study deals with the check valve safety valve for residential gas piping. It can be manually shut off within 1 second in case of emergency, and it is possible to touch 3kg of pressure by hand force. To develop the technology so that it can be used repeatedly. Study results after first valve operation. And 0.61 seconds on average. Therefore, it was found that there was no problem in operation even when used as a safety valve. Third, it was found that all of the results of using the blocking ball diameter of 7mm were not abnormal. In this study, it is meaningful to develop the check valve safety valve of gas piping and verify the performance by testing with existing valve.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.53-60
• /
• 2004

본 연구에서는 현재 일반가정이나 영업소에서 사용중인 액화석유가스 용기용밸브의 문제점을 제시하고, L.P 가스사고를 예방할 수 있는 LPG용 과류밸브의 과류차단장치를 개발${\cdot}$제작함에 있어 고압가스 안전관리기준 통합고시 ${\lceil}$제12장 4절 과류차단형 액화석유가스 용기용밸브${\rfloor}$에서 규정한 과류차단 성능시험을 실시하는데 필요한 여러 가지 변수를 선정하여 차단장치의 형상에 따른 최적의 차단 유량 범위를 찾고자 실험을 실시하였으며, 보다 궁극적으로는 일반 용기용밸브가 가진 문제점을 조속히 해결하고 진정한 의미의 안전밸브를 개발하는데 목적이 있다.

• Journal of the Korean Institute of Gas
• /
• v.9 no.2 s.27
• /
• pp.38-42
• /
• 2005

This study introduced concept of safety valve about development of valve for LP gas cylinders. LP gas cylinders are used more because of convenience of use, but a lot of accidents are occurred. Specially, it is used by purpose to injure glossary or others and is sometimes used to a demonstration tool. Korean government was making mandatory to use overuse cutoff valve to reduce accident, but it is real condition that product development is not following. In this study, introduce concept of safety valve that introduce more original safety concept than overuse cutoff valve. This was developed by method that insert module to present use valve and flowing of gas is controlled in state that hose or regulator un-connects to valve. Also, flowing of gas cut-off immediately if hose is cut or occurrence of overuse is produced even if is using normally.

• Journal of the Korean Institute of Gas
• /
• v.17 no.3
• /
• pp.14-19
• /
• 2013

This paper presents an experimental study on the safety of a valve for a special gas cylinder. The test valves that were randomly dismantled from the special gas cylinder were experimented on the gas leakage and operation safeties. The crack, wear and deformation of the valve body, screw thread, safety disk, vent hole, stem and handle components that may affect to the gas leakage safety of a used valve were not found in this experimental study. A painted handle of a valve was partly stripped from the coated surface, and the surface of PT screw of a used valve body was rusted. But, these paint and rust problems do not affected to the gas leakage safety of used valves. And there was no gas leakage in the dismantled valve, and the permanent deformation and partial scars of a valve stem and O-rings were observed on the rubbing surfaces. Thus, the valve seat and O-rings are recommended to be replaced for a gas leakage safety of a dismantled valve. And it is necessary to repair and inspect handle fastening forces for a safe opening and closing operations of a valve.