• Journal of the Korea Institute of Building Construction
• /
• v.20 no.5
• /
• pp.471-480
• /
• 2020

Although the domestic industrial accidents have been decreased gradually, deaths in the construction sites have been occupied 49.9 percent of the total industry and deaths from fall accident have been accounted for 59.7 percent of the construction industry. In order to prevent fall accident, various safety activities and policy have been carried out. However, the impact on the domestic construction industry was inadequate. On the other hand, in advanced countries, such as the United States, Japan, EU, and Singapore Industrial accidents have been lower than domestic industry due to safety activities, the regulations and policies appropriate for each country's situation. In this study, we compare the major points of the Industrial Safety and Health Act in developed countries with those in South Korea to reduce the number of falls, and propose a revision. As a result of conducting research, three revisions have been proposed as 1) Enhance standards for fall height, 2) Improvement of upper safety rail height on guardrail, 3) Revision and research on Horizontal Sarety bar attachment system. This study will be utilized as a basic study for the analysis of cases in advanced countries.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.511-519
• /
• 2007

This study provides comprehensive design improvements covering technical issues concerning life safety matter In case of fire train stoppage in the middle of a tunnel. Recently Government announced that most of subway platforms will have screen doors in 3 years. Therefore, many fire safety engineers considered that they may contribute on life safety on train stoppage in tunnel. Especially The screen door can protect platform from smoke along tunnel ceiling when fire train stopped in tunnel. The study showed that platform ventilation ducts and the a tunnel ventilation chimney in the middle of tunnel in exiting subway tunnel could not guarantee life safety ability in terms of RSET vs. ASET comparison. Furthermore during evacuation process many peoples may be threatened from the smoke spread from the origin of fire. Although only additional vertical route can be installed in tunnels In order to decrease RSET, it will costs high or no spaces remains in outside on the road. The study suggested that increase of ASET can be best solution without additional escape route, therefore alternative design methods suggested on the base of simulation results. Finally the study shows alternative methods can give good result in terms of evacuation performance evaluation. The evacuation performance evaluation helps the decision-maker to determine the preferred alternatives or upgrades to existing tunnel infrastructure and other measure to meet safety objectives. Finally, the study details the effectiveness of measures the can be taken to reduce the risk of incidents in subway tunnels.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.233-241
• /
• 2018

Recently, integrated railway safety monitoring and control system, which is a convergence system based on data distribution service for railway safety monitoring and control, is under development. It collects safety data of vehicle, signal, power and safety monitoring facilities in real time and adopts communication middleware based on distributed service for mass data processing. However, in the case of a server device used as an existing control server, the performance of the distributed service middleware can not be exhibited due to low hardware performance due to safety reasons. In the safety control system, 200,000 packets per second were set as the transmission target, but the performance test of the LAB was not satisfied. In this paper, we analyze the characteristics of railway data to improve the data collection performance of existing equipment and apply DDS-based streaming transmission method to the data model of signal facilities and vehicle facilities with large packet amount according to the analysis result. As a result, it was confirmed that the throughput was improved about 30.4 times when the hardware performance was the same. We plan to improve the data processing performance by applying it to real-time railway safety integrated monitoring and control system in the future.

• Journal of Navigation and Port Research
• /
• v.45 no.1
• /
• pp.9-15
• /
• 2021

According to IMO, MASS is defined as a vessel operated at various levels independent of human interference. The safety navigation support service for MASS is designed to improve the safety and efficiency of MASS by developing public services on shore for ship arrivals/departures and for cargo handling. The safety navigation support service consists of a total of six types of services: autonomous operation, berthing/unberthing/mooring, cargo handling and ship arrival/departure service, PSC inspection, condition monitoring, and accident response support services. In order to support accident response service, the relative importance of a bridge navigational equipment was assessed by stratifying the navigation system to provide safe and efficient support services by objective judgment through specific and quantitative methods using AHP, one of decision-making methods used by an expert group. The survey was conducted by dividing the bridge navigational equipment into depth, location, and speed information. As a result of applying the AHP method, the importance of depth, location, and speed information was assessed. The relative importance of each equipment for providing location information was also assessed in order of Radar, DGPS, ECDIS, Gyro compass, Autopilot, and AIS. This was similar to survey results on the utilization of each operator's preference and its impact on marine accidents.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.6
• /
• pp.665-676
• /
• 2021

As the number of deteriorated buildings increases, the importance of safety diagnosis and maintenance of buildings has been rising. Existing visual investigations and building safety diagnosis objectivity and reliability are poor due to their reliance on the subjective judgment of the examiner. Therefore, this study presented the limitations of the previously conducted appearance investigation and proposed 3D Point Cloud data to increase the accuracy of existing detailed inspection data. In addition, this study conducted a calculation of an objective building safety grade using a Deep-Neural Network(DNN) structure. The DNN structure is generated using the existing detailed inspection data and precise safety diagnosis data, and the safety grade is calculated after applying the state evaluation data obtained using a 3D Point Cloud model. This proposed process was applied to 10 deteriorated buildings through the case study, and achieved a time reduction of about 50% compared to a conventional manual safety diagnosis based on the same building area. Subsequently, in this study, the accuracy of the safety grade calculation process was verified by comparing the safety grade result value with the existing value, and a DNN with a high accuracy of about 90% was constructed. This is expected to improve economic feasibility in the future by increasing the reliability of calculated safety ratings of old buildings, saving money and time compared to existing technologies.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.306-318
• /
• 2021

The dispatch law has a negative impact on safety management at construction sites as the command and command relationship to safety assistants of the original contractor are applied to the dispatch law. Purpose: The purpose is to study the importance and impact of safety management according to the dispatch law, and to propose a direction for safety management so that safety assistants can actively and proactively prevent accidents. In this study, we used AHP analysis techniques for experts to achieve the final goal and verified the suitability through logistic regression. Method: AHP analysis technique is used for experts and workers and logistic regression analysis is conducted. Result: The result of analyzing scenario data where the dispatch method can be applied showed the importance in the order of education (SkillUp education), management (work-time management) and direct instructions (feedback instruction). In logistic regression analysis, feedback is the factor that affects direct instruction, and in education management, the ratio of education management is 3.42 times lower than that of other groups when only the team leader of the company gives work instructions. Conclusion: The management of feedback and education is more important than anything else within the range in which the dispatch method is not applied, and the expansion of non-face-to-face online education is judged to avoid the violation of dispatch method because the expansion of non-face-to-face online education due to covid 19 recently has brought more various target for safety education.

• Journal of Korean Home Economics Education Association
• /
• v.34 no.2
• /
• pp.1-19
• /
• 2022

The purpose of this study is to analyze the keywords of the middle school textbooks based on the 2015 revision of the technology and home economics curriculum to understand the core concepts and contents composition of the 'housing' unit. Using TEXTOM and UCINET programs, the frequencies and centralities of the keywords were analyzed, and CONCOR analysis was performed. The results are as follows. First, the content system of the 'housing' unit is divided into 'life culture' and 'safety' in the 'family life and safety' area. Second, in the 'safety' section, the frequencies of occurrence of the words were high in the order of indoor, occurrence, use, noise, and safety accidents, in the order of frequency of occurrence. It was confirmed that words related to daily life, safety accidents, and prevention were closely connected to each other. In the 'life culture' section, the frequencies of occurrence were high in the order of space, housing, family, and residential space, and the correlations between these keywords were also high. Third, the most influential core keywords were, indoor and occurrence in the 'safety' section, and space, family, and housing, in the 'life culture' section. Fourth, the 'safety' section were divided into two subunits, 'safe living environment' and 'comfortable living environment', and the 'life culture' section were divided into four subunits, 'living space composition', 'space utilization', 'housing value and lifestyle', and 'housing culture'.

• Journal of Food Hygiene and Safety
• /
• v.37 no.3
• /
• pp.129-135
• /
• 2022

The official analytical method for the analysis of harmful heavy metals in Meju, distributed in Korea, employs a strong acid to decompose the organic components. This analysis is time consuming and harmful to the users and/or the environment. This study aimed to develop a new pre-treatment technology using laser ablation, to rapidly analyze harmful heavy metals without using strong acids. The results obtained from this method were validated by the National Institute of Food and Drug Safety Evaluation guideline (NIFDS, 2016). Moreover, a comparison of the two methods showed that the analytical time for 55 Meju samples was shortened by 96% or more in the new method. The results showed no significant difference in the recovery ranging from 90-120%. The proposed method proved suitable for detecting harmful heavy metals in Meju.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.1
• /
• pp.1-11
• /
• 2023

The comprehensive natural disaster reduction plan, the highest plan in the disaster prevention field, was implemented by local governments. second plan is currently being formulated. In order to minimize human and property damage, structural and non-structural measures for each of the nine disaster types are established and implemented for 10 years. Structural measures are based on engineering and quantitative analysis, and the criteria for setting reduction measures are clear. Non-structural measures, however, currently lack the set criteria. the basic disaster and safety management law included the safety vulnerable class in 2018. Currently, the safety vulnerable class of the detailed establishment criteria of the comprehensive natural disaster reduction plan is being established, including children, the elderly, and the disabled. However, due to the lack of data securing and database construction by local governments, it is difficult to prepare a location map for establishing reduction measures for the safety vulnerable. Therefore, in this study, OPEN API data of the safety vulnerable class were collected and statistical information and GIS of SGIS information services were used. The distribution diagram of the safety vulnerable class in Samcheok, Gangwon-do, which is a sample area, and the distribution diagram of the safety vulnerable class in units of the output area (OA) in Geundeok-myeon were prepared.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.1
• /
• pp.11-23
• /
• 2004

The modem industrial society is developing while growing more diverse and gigantic. Accordingly, occupational injuries or accidents can be caused in various situations, not just in the limited range of workplaces but also in the surroundings, and interest has increased in the prevention of occupational accidents with respect to occupational health and safety, and environment. Thus, this thesis will consider 4MlE (Man, Machine, Method, Material, Environment) as the fundamental causes of accidents and introduce a model of system in which the output of the process control system is replaced by accidents with its input by 4M1E. Furthermore, it will demonstrate how occupational hazardousness can be measured, whereby it can also be rated, by examining the relationship between 4M1E and types of accident in terms of the categories of severity, frequency, and detectability, based on the application of the model to the framework of FMEA.