• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.367-375
• /
• 2023

This study developed a new distance metric for vessel trajectories, applicable to marine traffic control services in the Korean coastal waters. The proposed metric is designed through the weighted summation of the traditional Hausdorff distance, which measures the similarity between spatiotemporal data and incorporates the differences in the average Speed Over Ground (SOG) and the variance in Course Over Ground (COG) between two trajectories. To validate the effectiveness of this new metric, a comparative analysis was conducted using the actual Automatic Identification System (AIS) trajectory data, in conjunction with an agglomerative clustering algorithm. Data visualizations were used to confirm that the results of trajectory clustering, with the new metric, reflect geographical distances and the distribution of vessel behavioral characteristics more accurately, than conventional metrics such as the Hausdorff distance and Dynamic Time Warping distance. Quantitatively, based on the Davies-Bouldin index, the clustering results were found to be superior or comparable and demonstrated exceptional efficiency in computational distance calculation.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.145-151
• /
• 2009

Current highway design standards is based on the safety under the free flow condition. The length of deceleration lane is also determined in terms of the deceleration distance which is necessary for the driers to adjust the vehicle speed from the speed limit on the main road to that on the exit ramp of the interchange. However, the queues are frequently developed on the deceleration, and the following vehicles to exit must decelerate on the main road. It may cause delay on the main road and traffic accidents. This study is to suggest a methodology to minimize such problems with the shock-wave theory. The queue length of exiting vehicles can be estimated by the design speeds, traffic volumes of main road and the exiting ramp, and the countermeasures to the operational problems. According to the results, the queue length can be shortened to 80% by upgrading the design speed of exit ramp as the amount of 10km/h. Fifty percent of queue length can be shortened by adding an additional lane on the ramp to two lanes.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.582-585
• /
• 2016

This study intends to provide initial evacuation distances for the public in case of accidental releases of hydrogen fluoride (HF). HF is a very toxic chemical that is widely used in the chemical, electrical, and electronics industries. Consequence modeling programs, such as ALOHA and PHAST, were used to help formulate a contingency plan in case of an HF leak. For the purpose of this study, the release of entire quantity of HF in 10 min is defined as a worst-case scenario and the release from a partial line rupture is used as an alternative case scenario as National Institute of Chemical Safety (NICS) guidelines. Once the discharge rates were calculated based on the scenarios, the ERPG-2 endpoint distances have been obtained for representative daytime and nighttime weather conditions. This paper presents graphs that can be used to enact swift evacuation orders and emergency response plans in the case of accidental releases of HF.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.222-222
• /
• 2020

급격한 기후변화와 도시화, 산업화로 인해 도시지역의 홍수피해가 증가하고 있다. 기후변화로 인한 재해 중 45%가 극한 강우 또는 홍수로 인한 재해로 확인되었으며, 급속도로 확장되고 있는 도시화 추세로 인해 도시지역의 홍수피해가 더욱 심화되고 있다(UNISDR, 2016). 기후변화 및 도시화로 인한 도시지역의 홍수피해가 증가하면서 시가지 건물 배치 및 도로망과 같은 복잡한 지역특성이 침수에 주는 영향을 분석할 필요성이 점차 증가하고 있다. 도시지역에서 홍수가 발생할 경우 복잡한 도로망은 배수로 역할을 하며 건물의 밀집도와 배치는 골목길 등에서 침수심을 증가시켜 안전한 구역이 좁아지는 효과를 발생시키고 있다. 본 연구에서는 우선 복잡한 시가지를 특성화하여 분석 할 수 있도록 이상화된 시가지 모형을 설계하고 제작한 후 유량에 따른 흐름 특성 변화를 분석하였으며, 기초 실험 결과를 바탕으로 강우강도에 따른 유황 변화와 연계할 예정이다. 기초 실험 수행을 위하여 먼저 건물 배치 밀집도를 고려하여 주거구역을 불록화하여 직선형의 이상적인 도시지역의 시가지 모형을 설계한 후 실험 모형을 제작하였다. 하천 범람으로 인한 침수발생을 재현하기 위해 상류 도로망에서 유량이 유입되도록 제작하였으며, 유입조건에 따라 변화하는 시가지 내부 침수 흐름은 LSPIV 기법을 이용하여 분석하였다. 유입조건에 따른 시가지 내 침수 특성을 분석한 결과 지형적 경사 특성에 의해 시가지 내부에서 흐름이 가속되며, 모형의 사거리 구간에서는 흐름 유입 방향에 대해 횡방향으로 흐름이 합류하는 경우에는 합류 흐름이 유속이 더 높은 것으로 분석되었다. 따라서 합류 이후 유속이 증가하면서 피해 발생 가능성이 높은 것으로 나타났다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.2021-2031
• /
• 2013

Due to the rapid economic growth within the nation, the quality of life of individuals have improved dramatically. The scope of living activities of individuals have also extended, resulting in a rapidly increasing demand for automobiles. The number of vehicles registered in Korea is rapidly increasing and will reach 188.71 million as of December 2012. Compared to the registered residents of 50.94 million provided by the Ministry of Public Administration and Security, the registered population reflects about 4 people per every automobile. Due to the high demands for vehicles, the demands for parking lots in collective housing and businesses are also increasing. In reality, the current state of expansion of parking lots are underground, due to the limited available space on ground level. Specifically, the slope of a parking lot cannot exceed 17% linear slope and 14% curved slope according to the 'parking lot laws', however studies show that the driver feels at risk for safety when stopped on the parking ramp while driving in the parking lot. This study seeks to examine the suitability of parking lot ramps, concerning the safety aspects of the driver. First, the ramp type was categorized as linear or curved, then test drives were performed based on variations of slopes, slant distances, directions and points. A survey was administered to the driver after the completion of the test drive, in order to element design for an ideal ramp. In the case of curved ramp, the results of the estimate suggests a counterclockwise, slope at a maximum of 12% incline. The maximum slope for a linear ramp was analyzed to be between 13~14%, suggesting that slope greater than 15% need to be eliminated. In conclusion, it is anticipated that the element design parking ramp reported in this study will help to serve as a reference for future parking lot related guidelines, and provide cost effective traffic safety mechanisms in future parking lot businesses to follow.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2005

This paper describes the system for detecting vehicles in the rear and rear-side that access between sidewalk and bus stopped to city road at day by computer vision-based method. This system informs appearance of vehicles to bus driver and passenger for the safety of a bus passenger getting off. The camera mounted on the top portion of the bus exit door gets the rear and rear-side image of the bus whenever a bus stops at the stop. The system sets search area between bus and sidewalk from this image and detects a vehicle by using change of image and sobel filtering in this area. From a central point of the vehicle detected, we can find out the distance, speed and direction by its location, width and length. It alarms the driver and passengers when it's judged that dangerous situation for the passenger getting off happens. This experiment results in a detection rate more than 87% in driving by bus on the road.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.4
• /
• pp.723-730
• /
• 2023

Due to the recent development of battery technology, various types of means of transportation such as electric kickboards, Segways, and electric bicycles have emerged, which can be defined as Personal Mobility. In this paper, as the incidence of safety accidents increases due to the increase in the number of users of Personal Mobility, safety helmet devices that strengthen safety capabilities and peripheral recognition functions were studied. In order for the helmet to send a safety signal, Arduino was used as a base to set the value of the sensor according to changes in distance and angle using the ultrasonic sensor to minimize errors and ensure smooth recognition. In addition, a gyro sensor was used to turn on the direction indicator according to each slope. Using a CDS sensor, the LED is designed to turn on when it goes below 150 lux at night. Finally, it is possible to check whether a helmet is worn within 5cm, and when driving at an average speed, the direction indicator light is turned on at 10 degrees, and the LED is turned on at less than 150 lux.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.298-306
• /
• 2014

The railway signalling system for safe train operation regulates the train speed to ensure the safety distance between consecutive trains by using wayside facilities such as track circuits and interlocking systems. In addition, this signalling system controls the trackside equipment such as a railway point along the train line. This ground-equipment-based train control systems require high CAPEX and OPEX. To deal with these problems, the train control system using the on-board controller has been recently proposed and its related technologies have been widely studied. The on-board-controller-based train control system is that the on-board controller can directly control the trackside equipment on the train line. In addition, if this system is used, the wayside facilities can be simplified, and as a result, the efficient and cost-effective train control system can be realized. To this end, we have developed the prototypes of the on-board controller and wayside object control units which control the point and crossing gate and performed the integrated operation simulation in a testbed. In this paper, before the field test of the on-board-controller-based train control system, we perform the preliminary field trial including the installation test, wireless access test, interface test with other on-board devices, and normal operation test.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3D
• /
• pp.363-371
• /
• 2009

The purpose of this study is to verify the safety issue of the tinted vehicle based on the field study as well as the issue of the capacity reduction from the tinted vehicle. Through this study, an innovative experimental method to verify the issues was developed using RTK GPS receivers, and a data collection was conducted using the developed experimental method. Using the collected data, the effects of the ahead vehicle with the windows tinted on the traffic condition such as headways and acceleration noise were analyzed to test that the ahead vehicle with windows tinted too darkly affects the increasing vehicle maneuver as following the degree of tinting. This study was conducted as a frontier study and more studies, for example, full scale analyses considering various road and vehicle conditions need to be conducted in the future.

• Journal of Korean Society of Transportation
• /
• v.30 no.2
• /
• pp.43-52
• /
• 2012

A lane departure warning system (LDWS) is an effective technology-based countermeasure for preventing traffic crashes as it provides warning information to drivers. Understanding the characteristics of perception and satisfaction levels on LDWS is fundamental for deriving better performance and functionality enhancements of the system. The purpose of this study is to evaluate the user satisfaction of LDWS. A survey to collect user perception and user preference data was conducted. Both cross-tabulation analysis and binary logistic regression technique were adopted to identify the factors affecting user satisfaction for LDWS. The results revealed that the accuracy and timeliness of warning information was significant for evaluating the effectiveness of LDWS. In particular, the warning accuracy at a curve segment on the road was the most dominant factor affecting user satisfaction. The outcome of this study would be valuable in evaluating and designing LDWS functionalities.