• Explosives and Blasting
• /
• v.33 no.3
• /
• pp.29-50
• /
• 2015

Safe blast criteria based on the concept of scaled distances can be obtained from the statistical analysis on measured peak particle velocity data of blast vibrations. Two types of scaled distance widely used in Korea are the square root scaled distance (SRSD) and cube root scaled distance (CRSD). In contrast to SRSD scheme, however, the function of maximum charge per delay for CRSD increases without bound after the intersection point of these two functions despite of the similar goodness of fits. To prevent structural damage that may be caused by the excessive charge in the case of CRSD, it is suggested that CRSD be used within a specified distance slightly beyond the intersection point. On the other hand, there are several attempts that predict vibration level(VL) from the peak particle velocity(PPV) or estimate VL based on the scaled distances without considering their frequency spectra. It appears that these attempts are conducted in blasting contracts only for the purpose of satisfying the environment-related law, which mainly deals with the annoyance aspects of noises and vibrations in human life. But, in principle there could no correlation between peaks of velocity and acceleration over entire frequency spectrum. Therefore, such correlations or estimations should be conducted only between the waves with the same or very similar frequency spectra. Finally, it is a known fact that structural damage due to ground vibration is related to PPV level, the safety level criteria for structures should be defined by allowable PPV levels together with their zero crossing frequencies (ZCF).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.9-16
• /
• 2017

In this paper, we introduce a warning message providing methodology by considering the elderly's walking behavior in V2P(: Vehicle-to-Pedestrian) communication systems. Using the elderly's accident records in Kyounggi-do area from 2011 to 2014, the elderly's accident behaviors are analyzed by categorizing accidents as road type (single road/ crossing road), existence of traffic signal (with signal/ without signal), existence of crosswalk (crosswalk/ jaywalk), cause of accident (jaywalk/ signal violation/ carelessness accident/ Etc.). In addition, the elderly's behavior variable and vehicle speed are applied, then some threshold values are utilized in a warning message providing in conflict area. Finally, we propose a distance which can protect an accident depending on the elderly's walking speed, safety margin and vehicle speed. By applying the results of this research to the V2P/P2V communication based road safety message providing system with the elderly's walking behavior, it may be helpful to reduce accident rate of the elderly.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.3
• /
• pp.400-405
• /
• 2010

This paper deals with implementation of intelligent head up display for vehicle safety system. The Implanted new intelligent transport system offer the potential for improved vehicle to driver communication. The most commonly viewed information in a vehicle is from the Head up display, where speed, tachometer, engine RPM, navigation, engine temperature, fuel gauge, turn indicators and warning lights provide the driver with an array of fundamental information. TFT LCD, LCD Back light led, plane mirror, lens and controllers parts were designed to head up display system. Finally, In this paper, we analyze intelligent head up display system for vehicle of driver safety.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.659-677
• /
• 2022

Hydrogen is emerging as a next-generation energy source and development and supply of FCEV (hydrogen fuel cell electric vehicle) is expected to occur rapidly. Accordingly, measures to respond to hydrogen car accidents are required and researches on the safety of hydrogen cars are being actively conducted. In this study, In this study, we developed a hydrogen car accident scenarios suitable for domestic conditions for the safety evaluation of hydrogen car in road tunnels through analysis of existing experiments and research data and analyzed and presented the hazard distance according to the accident results of the hydrogen car accident scenarios. The accident results according to the hydrogen car accident scenario were classified into minor accidents, general fires, jet flames and explosions. The probability of occurrence of each accident results are predicted to be 93.06%, 1.83%, 2.25%, and 2.31%. In the case of applying the hydrogen tank specifications of FCEV developed in Korea, the hazard distance for explosion pressure (based on 16.5 kPa) is about 17.6 m, about 6 m for jet fire, up to 35 m for fireball in road tunnel with a standard cross section (72 m²).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1087-1096
• /
• 2011

Vehicular Ad Hoc Network(VANET) using wireless network is offering the communications between vehicle and vehicle(V2V) or vehicle and infrastructure(V2I). VANET is being actively researched from industry field and university because of the rapid developments of the industry and vehicular automation. Information, collected from VANET, of velocity, acceleration, condition of road and environments provides various services related with safe drive to the drivers, so security over network is the inevitable factor. For the secure message authentication, a number of authentication proposals have been proposed. Among of them, a scheme, proposed by Jung, applying database search algorithm, Bloom filter, to RAISE scheme, is efficient authentication algorithm in a dense space. However, k-anonymity used for obtaining the accurate vehicular identification in the paper has a weak point. Whenever requesting the righteous identification, all hash value of messages are calculated. For this reason, as the number of car increases, a amount of hash operation increases exponentially. Moreover the paper does not provide a complete key exchange algorithm while the hand-over operation. In this paper, we use a Received Signal Strength Indicator(RSSI) based velocity and distance estimation algorithm to localize the identification and provide the secure and efficient algorithm in which the problem of hand-over algorithm is corrected.

• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.439-450
• /
• 2023

Purpose: When conducting fire inspections in Korea, there are objects that violate the fire protection regulations that require a straight line distance of more than 5m between the air inlet and the discharge section if the floor area is less than 400m2, and this paper analyzes the reasons and conducts a model experimental study to support the need for related fire protection regulations. Method: Domestic firefighting objects were investigated and confirmed, domestic and foreign papers, policies, and laws and regulations were examined, and spaces with a straight line distance of less than 5m and more than 5m between the air inlet and discharge section were selected and analyzed through model experiments in a living room of less than 400m² . Result: When examining the domestic fire protection regulations (NFPCNational Fire Perpormance Code), the separation distance between the air inlet and the outlet is more than 5m when the floor area is less than 400m² , but as a result of the actual investigation, it was confirmed that there are firefighting objects that cannot keep the separation distance. In addition, when a paper review of overseas fire protection regulations for a straight line distance of more than 5m showed that there was no regulation on the straight line distance between the air inlet and the discharge section, the model experiment showed that the discharge speed was better when the straight line distance between the air inlet and the discharge section was more than 5m than when it was less than 5m. Conclusions: In this study, when examining overseas fire laws and regulations by comparing the performance of the fire protection ratio for the straight line distance between the air inlet and the exhaust section, there is no mandatory regulation for the straight line distance, but the domestic fire protection regulations (NFPCNational Fire Perpormance Code) require more than 5m. It is hoped that this will be reflected in the design stage in the future, and a foundation will be laid to reduce the responsibility and burden of fire superintendents.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.49-49
• /
• 2010

용접은 산업계의 기계 조립 및 접합을 위한 공정의 주요한 작업으로 조선, 중공업, 건설 등 산업현장에서 사람에 의한 수동적인 작업으로 대부분 수행된다. 이러한 용접 작업을 수행하는 용접 기술자는 산업 현장 훈련원과 직업 교육 학교에서 양성되지만 용접 훈련 과정은 실습 초보자에게 위험하고, 장시간 교육하기에 어려울 뿐 아니라 재료 낭비, 의사 소통의 한계, 즉석 결과 평가의 한계, 공간부족 등 다양한 문제가 있다. 그러므로, 안전하고 반복적인 실습 환경 제공하고 장시간 및 다수 교육참여 지원 등이 가능한 시스템을 구축하여 숙련된 우수 인력 조기 확보와 훈련 비용을 절감할 필요가 있다. 본 논문에서는 실제와 동일한 상호작용을 제공할 뿐만 아니라 고품질로 훈련 환경을 가시화하여 용접 상황을 동일하게 모사하는 가상 현실 기반 용접 훈련 시뮬레이터를 제시한다. 이 시스템은 용접의 형상과 환경의 고품질 가시화, 경험 DB를 통한 용접의 비드 형상 데이터 획득, 용접 토치를 이용하는 사용자 상호작용, 용접 훈련 결과 평가 및 최적 작업 가이드, 용접 콘텐츠 저작, 다양한 용접 훈련을 가시화하는 하드웨어 플랫폼으로 구성된다. 고품질 가상 용접 가시화는 경험 DB 기반 비드 형상 데이터와 신경회로망을 이용한 비드 형상 예측을 통해 실시간 비드 표현이 이루어지며 쉐이더 기반 고품질 모재 및 비드 표현, 아크 불꽃 효과 표현을 포함한다. 사용자 상호작용은 현장 작업 도구와 일치된 토치 인터페이스와 위치추적을 이용하여 토치의 작업각, 진행각, 속도, 거리 등을 반영할 수 있으며 진동과 소리 등 용접 훈련의 사실적 상호작용도 재현하였다. 용접 훈련 평가 및 최적 작업 가이드는 훈련자의 용접속도, 거리, 각도 등의 사용자 작업 결과를 그래픽으로 표현하고, 애니메이션을 통한 훈련 자세를 추후 분석할 수 있도록 하였고, 가상토치, 기준선, 수치계기 등을 이용한 최적 작업 훈련 가이드 제시하였다. 훈련 콘텐츠 저작은 메뉴UI 기반으로 용접의 전류, 전압 등의 조건과 상황을 선택하도록 제시하였고, 하드웨어 플랫폼은 워크벤치형 입체 디스플레이 방식으로 용접 환경을 가시화하였고, 위, 정면, 아래보기 등 다양한 용접 자세 변경을 지원 할 수 있도록 구축하였다. 이러한 가상현실 기반 훈련 시뮬레이터는 아크열 발생에 따른 장시간 훈련의 어려움을 극복할 수 있고, 다양한 실습 환경을 바꾸어 가며 반복적인 훈련이 가능하고, 실 재료를 사용하지 않아 재료의 낭비를 줄일 수 있는 환경 친화적인 안전하고 효율적인 훈련 실습 환경을 제공할 수 있다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.535-547
• /
• 2021

A policy to expand the hydrogen economy has been established in Korea and the supply of FCEV is being expanded to realize a hydrogen society. Therefore, the supply of FCEV is expected to increase rapidly, and a solution to respond to accidents of FCEV is required. In this study, an experimental study was conducted to analyze the effect of the hydrogen jet flame generated by a FCEV on the inner wall of the tunnel and the characteristics of the internal radiant heat. For the experiment, the initial pressure of hydrogen tank was set to 700 bar, and the injection nozzle diameter was set to 1.8 mm in order to make the same as the conditions generated in the FCEV. In addition, a tunnel fire resistance test specimen having the same strength as the compressive strength of concrete applied to general tunnels of 40 MPa was manufactured and used in the experiment. The results were analyzed for the separation distance (2 m and 4 m) between the hydrogen release nozzle and the tunnel fire resistance test concrete. As the result, the maximum internal temperature of the test concrete was measured to 1,349.9℃ (2 m separation distance), and the radiant heat around the jet flame was up to 39.16 kW/m².

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2009.05a
• /
• pp.77-81
• /
• 2009

논문은 지능형 자동차 개발을 위한 마이크로마우스를 활용한 차량-도로 간 통신, 모터제어, 영상처리와 물체감지 센서들을 활용한 도로 상황정보 인식 시스템 등을 활용하여 지능형 자동차의 운행을 구현하고 테스트 할 수 있다. 이를 활용하여 검증된 기술들을 실제 차량에 적용하기 위해서 다양한 실험과 테스트를 실시한다. 또한 누구나 쉽게 간단한 마이크로 컨트롤러를 통한 지능형 자동차를 위한 다양한 아이디어를 접목할 수 있도록 시스템을 설계한다. 이를 활용하여 영상처리를 통한 차선인식과, 직진 좌회전 및 도로의 교통표시마크를 읽어 들여 차체를 컨트롤하고 차량-도로간 통신을 이용해서 신호등의 정보를 입력받아 교차로를 안전하게 통과하게 된다. 또한 앞 차량을 인식하여 자동으로 속도조절과 차량 간 거리를 유지하는 시스템을 구현한다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.11a
• /
• pp.342-345
• /
• 2003

자동운전과 안전운전 구현을 위한 첨단 차량 및 도로 시스템(AVHS : Advanced Vehicle & Highway Systems)의 한 분야인 충돌 방지 시스템을 완성하기 위해서는 차량간의 상대 거리, 차량의 속도, 차선의 굴곡 정도, 경사도등을 사용해서 종합적으로 상황 판단을 내려야 한다. 본 논문에서는 이들 요소들중에서 차선의 굴곡도 판단을 근사 추론을 이용하여 실험하였다. 근사추론을 이용한 것은 차선의 굴곡도를 계산형으로 파악할 때의 단점인 계산 시간 오버헤드(overhead), 또 그에 따른 실시간 처리의 어려움, 고가의 장비필요성 등을 극복하기 위해서이며, 실험은 Fuzzy Logical Inference 기법을 사용하였다. 본 연구에서는 실제 도로상에서의 계산된 굴곡도와 실험된 시스템 결과와의 유사성과 그 시스템의 사용 가용성(feasibility)을 검정하였다.