• Title/Summary/Keyword: 안전사고방지

Search Result 872, Processing Time 0.03 seconds

Conceptual Design of Mechanical System for Recovery of Seabed-Deposited Hazardous and Noxious Substances Based on Performance Requirements (해저침적 HNS 회수용 기계장치의 성능요건 기반 개념설계)

  • Hwang, Ho-Jin
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.26 no.6
    • /
    • pp.689-697
    • /
    • 2020
  • Hazardous and noxious substances (HNS) may cause maritime incidents during marine transportation, which are liable to lead to a large amount of spillage or discharge into the sea. The damage to the marine environment caused by the HNS spill or discharge is known to be much greater than the damage caused by oil spill. Particularly dangerous is HNS, which is deposited or buried in the seabed, as it can damage the organisms that live on, in, and near the bottom of the sea, the so-called "benthos," forming the benthic ecosystem. Therefore, it is vital that the HNS deposited on the seabed be recovered. In order to do so, procedures and equipment are required for accurate detection, stabilization treatment, and recovery of HNS in subsea sediment. Thus, when developing a mechanical recovery system, the performance requirements should be selected using performance indices, and the conceptual design of the mechanical recovery system should be based on performance requirements decided upon and selected in advance. Therefore, this study was conducted to arrive at a conceptual design for a mechanical recovery system for the recovery of HNS deposited on the seabed. In the design of the system, based on the fundamental scenario, the method of suction foundation with the function of self enclosing was adopted for recovering the HNS sediment in the subsea sediment. The mechanical recovery system comprises the suction foundation, pollution prevention, a pump system, control system, monitoring device, location information device, transfer device, and tanks. This conceptual design is expected to be reflected and used in the basic design of the components and shapes of the mechanical recovery system.

A study on the improvement of the air exhaust system at the PSD installed subway station (도시철도 지하역사 PSD 설치에 따른 배기시스템 개선 연구)

  • Kwon, Soon-Bark;Song, Ji-Han;Ryu, Ju-Hwan;Jo, Seung-Won;Oh, Tae-Suk;Bae, Sung-Joon;Kim, Hyo-Gyu
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.17 no.3
    • /
    • pp.353-362
    • /
    • 2015
  • Platform screen door (PSD) installed at underground subway station has reduced the safety accident, but it may cause poor air ventilation condition due to the isolated exhaust duct in the subway tunnel area. In this study, the additional ventilation system was suggested, which can be installed at a void space (i.e., storage room under stairs) of platform in order to improve efficiency of air ventilation rate. Exhausted air from platform was directed to underneath of platform and joined with existing ventilation duct of train exhaust system (TES). One subway station in Seoul city was selected to predict the effectiveness of the suggested lower exhaust system by using the computational fluid dynamics (CFD) analysis. The predicted mean age of air was decreased by 16.5% which proves the improvement of air ventilation efficiency when the suggested lower exhaust system was applied.

Mechanical Analysis of the Force on Landing 3 Type Curves(Ellipse, Circle, Brachistochrone) of Halfpipe (스노우보드 하프파이프 점프시 착지 충격에 관한 3가지 곡선(타원, 원, 브라키스토크론)의 역학적 해석)

  • Lee, Un-Hak;Kim, Kew-Wan;Park, In-Ho
    • Korean Journal of Applied Biomechanics
    • /
    • v.18 no.4
    • /
    • pp.1-19
    • /
    • 2008
  • This research is to analyze the force on landing 3 Type of Halfpipe Curves(Ellipse, Circle, Brachistochrone) based on the mechanical calculation of normal force on a sloping surface. Jumping off a platform on a bard horizontal surface, the flexing of the legs, the softness of the snow, the angle of the landing surface, initial velocity and the forward motion of the snowboarder can contribute to reducing the force on landing. But halfpipe is significantly determined by the curvature of surface. It is definitely verified that the Brachistochrone curve is more safety than others. However currently using the Ellipse curve is mostly safe too. If we consider the efficiency of construction, we can easily think there is no use of another curves except normal ellipse curved halfpipe. It would better that geometrically verity curved halfpipe should be designed for improving fluent skills to snowboarders. This methode of research can be a model of scientifical research on sports safety how can sportsman reduce critical injury by designing optimal halfpipe facilities and manual.

Hazard Analysis of Autonomous Vehicle due to V2I Malfunction (V2I 오작동에 의한 자율주행자동차의 위험성 분석)

  • Ahn, Dae-ryong;Shin, Seong-geun;Baek, Yun-soek;Lee, Hyuck-kee
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.18 no.6
    • /
    • pp.251-261
    • /
    • 2019
  • The importance of autonomous driving systems that utilize V2X services such as V2V(Vehicle to Vehicle) and V2I(Vehicle to Infrastructure) for safer and more comfortable driving is increasing with the recent development of autonomous vehicles. Partly autonomous vehicles based on environmental sensors have limitations for predicting and determining areas beyond the recognition distance of the mounted sensors and in response to atypical objects that are difficult to detect. Therefore, it is important to utilize the V2X service to improve the limit of sensor detection performance and to make driving safer and more comfortable. However, there may be an accident risk of autonomous vehicles due to incorrect information provided by V2X. Thus, the application of technology to prevent this needs to be considered. In this pater, we used the ISO-26262 Part3 Process and performed HARA (Hazard Analysis and Risk Assessment) to derive the risk sources of autonomous vehicles due to V2I malfunctions by using the communication between vehicles and infrastructure among V2X. We also developed ASIL ratings based on the simulations and real vehicle tests of the malfunctions of major cases of usnig V2I.

Intelligent Driver Assistance Systems based on All-Around Sensing (전방향 환경인식에 기반한 지능형 운전자 보조 시스템)

  • Kim Sam-Yong;Kang Geong-Kwan;Ryu Young-Woo;Oh Se-Young;Kim Kwang-Soo;Park Sang-Cheol;Kim Jin-Won
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.43 no.9 s.351
    • /
    • pp.49-59
    • /
    • 2006
  • DAS(Driver Assistance Systems) support the driver's decision making to increase safety and comfort by issuing the naming signals or even exert the active control in case of dangerous conditions. Most previous research and products intend to offer only a single warning service like the lane departure warning, collision warning, lane change assistance, etc. Although these functions elevate the driving safety and convenience to a certain degree, New type of DAS will be developed to integrate all the important functions with an efficient HMI (Human-Machine Interface) framework for various driving conditions. We propose an all-around sensing based on the integrated DAS that can also remove the blind spots using 2 cameras and 8 sonars, recognize the driving environment by lane and vehicle detection, construct a novel birds-eye HMI for easy comprehension. it can give proper warning in case of imminent danger.

Applicability of the Hydrocyclone for Efficiency Improvements to Sea-water Cooling Systems (해수 냉각시스템 효율 향상을 위한 하이드로사이클론의 적용가능성)

  • Kim Bu-Gi;Han Won-Hui;Cho Dae-Hwan;Choi Min-Seon
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.11 no.2 s.23
    • /
    • pp.109-115
    • /
    • 2005
  • Hydrocyclone has been widely used for the solid-liquid separation in many industrial sites because of its comparatively preferable applications that can be applied to wide-range particle sizes. If seawater with impurities flows through pumps or heat exchanger, it might cause an decrease in the efficiency of cooling system In this paper, we have suggested some methods of separating impurities from seawater in the cooling system by using a Hydrocyclone. The effects of design factors as solid concentration, cyclone inlet pressure, flow rate and diameter of underflow on the separating performance of the Hydrocyclone were investigated The results from this study are summarized as follows: 1) In proportion to the decrease of solid concentration, the efficiency of solid-liquid separation is improved. 2) According as the cyclone inlet pressure increases the efficiency of separation is improved. Conclusively, this research suggested that the Hydrocyclone will be used as a pre-treatment system of cooling water in machines, and eventually prevent unexpected accidents in engine systems.

  • PDF

Applicability of the Hydrocyclone for Efficiency Improvements to Sea-water Cooling Systems (해수 냉각시스템 효율 향상을 위한 하이드로사이클론의 적용가능성)

  • Kim Bu-Gi;Han Won-Hui;Cho Dae-Hwan;Choi Min-Sun
    • Proceedings of KOSOMES biannual meeting
    • /
    • 2004.11a
    • /
    • pp.109-115
    • /
    • 2004
  • Hydrocyclone has been widely used for the solid-liquid separation in many industrial sites because of its comparatively preferable applications that can be applied to wide-range particle sizes. If seawater with impurities flows through pumps or heat exchanger, it might cause an decrease in efficiency of cooling system. In this paper, we have suggested some methods of separating impurities from seawater in the cooling system by using a Hydrocyclone. The effects of design factors as solid concentration, cyclone inlet pressure, flow rate and diameter of underflow on the separating performance of the Hydrocyclone were investigated The results from this study are summarized as follows: 1) In proportion to the decrease of solid concentration, the efficiency of solid-liquid separation is improved 2) According as the cyclone inlet pressure increases the efficiency of separation is improved Conclusively, this research suggested that the Hydrocyclone will be used as a pre-treatment system of cooling water in machines, and eventually prevent unexpected accidents in engine systems.

  • PDF

A Study on the Working Status and Onboard Training Satisfaction Level of Merchant Ship's Cadets (상선 위탁실습생의 업무실태 및 실습만족도에 관한 연구)

  • Kim, Deug-Bong;Lee, Chang-Hyun;Lee, Hong-Hoon
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.24 no.6
    • /
    • pp.709-716
    • /
    • 2018
  • In 2017, there was an accident in which a cadet onboard training was killed. This cadet worked 12 hours a day. No regulation has yet been laid down to define hours and breaks for interns. Therefore, the purpose of this study is to investigate the working status of commissioned training, the satisfaction survey of commissioned training, and to improve the treatment of commissioned trainees. The survey was conducted on students commissioned from merchant vessels, and 461 respondents answered the questionnaire. The results of the survey are as follows. First, 43.0 % of cadets said that they worked 10 hours a day on average, regardless of the vessel type, and 35.2 % said that the average rest time was 8 hours. 15.6 % of respondents said they had worked more than 12 hours. Unreasonable order cases deviating from the purpose of education were "making ramen, working at rest time, instruction of dangerous work, making night snack and private errands." Second, the satisfaction level of cadets who practiced on LNG carriers was high, while the satisfaction level of cadets on bulk carriers and container carriers was low. It was confirmed that the ship's size, ship's age, working hours, rest time and training support costs had little minor effect on educational satisfaction. Lastly, 56.8 % of the cadets answered 'commissioned training is like work.' Based on the results of the questionnaires, we proposed the following improvement methods; providing legislation for working hours and rest time for commissioned training cadets, protection system against violence and sexual harassment and victim protection. This study focuses on the working and rest time of merchant ship's cadet and it is meaningful to investigated the onboard training satisfaction by ship's type, size and age.

Improving Reliabilities of Dam Displacement based on Monitoring Given Points by Total Station (기준점 측량을 활용한 광파기 기반 댐 제체 변위 계측 신뢰도 향상)

  • Kang, Gi-Chun;Kim, Bong-Jae;Hong, Seok-Woo;Yim, Yeon-Chool;Kim, Ji-Seong
    • Journal of the Korean Geosynthetics Society
    • /
    • v.16 no.1
    • /
    • pp.1-8
    • /
    • 2017
  • Displacement of dams by various instrumentations has been monitored for its safety management and analyzing the behavior after a dam collapse accident. However, unknown displacement of dam has frequently been occurred and it's difficult to analyze behavior of dams more accurately. In this study, improvement of reliabilities for displacement of dams measured by a total station was suggested by calibrating the monitoring system. The position of total station was initially measured through 2-3 given points and the coordinate of the total station was considered as an absolute value. Also, base horizontal and vertical angles had not been considered even if they are important factors when displacement was estimated. In this study, location of the total station and variations of base horizontal and vertical angles were investigated during measuring displacements of targeting points. From the results of this study, they are important factors which are affecting measurements of dam displacements. Before the calibrating, the displacement at 50 m from total station was ${\pm}20mm$. After the calibrating, the displacement was decreased by ${\pm}5mm$.

A Study on Rethinking the Operating of Counter-terrorism Systems in South Korea (한국 대테러시스템 운영의 재모색)

  • Kwon, Jeong-Hoon
    • Korean Security Journal
    • /
    • no.51
    • /
    • pp.153-170
    • /
    • 2017
  • The purpose of this study is to rediscover the operation of anti-terrorism system focusing on the system approach and crisis management approach for counter terrorism in Korea. According to the results of this study, it is required to establish a link between open systems and integrative system focusing on functional linkage of counter-terrorism systems, and cooperative measures with private sectors in the dimension of governance activation. Further, it is necessary to prepare legal foundations for the cooperation with private sectors and then promote open consciousness transformation through the partnership with private security for anti-terrorism activities. In addition, in its preventive stage, it is required to prepare legal systems related to biochemical terrorism for stronger regulations through crisis-managerial approach. Next, in its preparatory stage, it is necessary to prepare education and enact named Terror Prevention Day for increasing terror safety consciousness, and then extend citizen reporting reward systems to enable citizens to participate and become interested voluntarily in terror prevention. Also, it is essential to establish the substantial training system for preparing for terror occurrence. Moreover, in its response stage, it is urgent to construct networks between related institutions to manage field and spot responses with integrative management systems through information sharing. Furthermore, in its restoration stage, it is indispensible to prepare long-term management systems for injured persons and families of the deceased from terror incidents.

  • PDF