• Journal of Digital Contents Society
• /
• v.18 no.2
• /
• pp.403-410
• /
• 2017

In this paper, the fire extinguisher maintenance system using smart NFC communication and the real-time pressure measurement is proposed. The proposed system consists of three steps in the flow of information. The first step is to identify the fire extinguisher through NFC tagging in the fire extinguisher module using the smart device. The fire extinguisher appearance check and the real-time pressure measurement is performed in the second step, and the last step sends the check status information to the management server. In particular, the actual pressure value is calculated based on the angle of the green area and the indicating needle. Some experiments are conducted so as to verify the proposed system, and as a result, the proposed system shows that the administrator can effectively control the status information of fire safety check.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.281-284
• /
• 2011

Smart phone is being used in the job as the ubiquitous society will Without being restricted by the time and place and devices. The rapid increase in the use of smart phones has brought the activation of the mobile job. And government agencies have brought in the transition to a smart society. In this paper, using a Voice over Internet protocol(VoIP) service for your smart phones to enhance security is the study of encryption technologies. External and internal signals, and call encryption and security standards of administrative agencies is the study of VoIP. Smart phone VoIP service is a study that security of equipment certificate, the internal signal and call encryption. This paper will contribute what using smart phone VoIP security and usability In smart generation.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.80-84
• /
• 2010

Satellite structure should be designed to accommodate and support safely the payload and equipments necessary for its own missions and to secure satellite and payloads from severe laucnch enviroments. The lauch environments imposed on satellites are quasi-static accelerations, aerodynamic loads, acoustic loads and shock loads. To qualify the structure design against low-frequency dyanmic enviromnent, sine vibration test should be performed. During sine vibration test, the notchings are implemented in order to keep the payloads and equipments from excessive loading at their own main modes. This paper deals with sine test prediction, sine vibration test results, comparison of predicted values and tested values, and verification of Finite Element Model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.372-378
• /
• 2016

A mound was constructed to install a caisson and sofa blocks underwater. The mound riprap, which were of uniform grade, size, shape, and specific gravity, formed the foundation for the support superstructure. Also, rubble leveling works were performed before installing structures such as caissons. In this study, underwater construction equipment was developed with a remotely controlled operating system and underwater environment monitoring system for unmanned underwater rubble leveling work. The performance of the developed equipment was verified using on-land and underwater tests. In addition to the performance verification, the construction process and economic efficiency of the equipment should be checked before applying it to the real construction field for commercial purposes. In this paper, a construction process using the developed equipment was proposed and compared with the existing rubble leveling method. The results demonstrated that the new construction method has higher economic efficiency and safety than the existing construction method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.605-605
• /
• 2012

최근 통계자료에 의하면 국내 제방붕괴 유형 중 11.5%가 제체 불안정에 의한 붕괴로 보고되고 있다. 홍수시 노후화된 제방이 붕괴하여 발생하는 인명 및 재산피해는 점차 증가하고 있는 상황이어서, 이에 대한 제방 시설물의 보강 및 안전관리 대책이 필요한 상황이다. 하천시설물 주변의 흐름특성에 의하여 세굴이 발생할 수 있는 지점에는 보호공을 설치하여 시설물의 안정성을 확보하도록 하천설계기준 해설(2009)에서 제안하고 있다. 그러나 구조물을 보완하는 보호공의 공종 및 규격 등을 설계하기 위한 세부적인 설계지침이 미흡하여 외국의 연구 또는 설계사례를 참고하여 국내 하천에 적용하고 있는 상황이다. 해외의 연구사례를 살펴보면, 설계공식에 적용된 설계인자인 유속 및 수심 등을 1차원 단면평균값을 활용하는 경우가 많아서 복잡한 하천의 흐름특성을 반영하기에 미흡한 상황이다. 본 연구에서는 국내 하천해석에서 주로 활용되고 있는 수치모형을 이용하여 실험수로의 흐름을 재현하고 수리실험을 통하여 관측한 유속 및 수위분포 결과와 비교하였다. 2차원 수치모형으로는 RMA2, CCHE2D, FLUMEN 등의 상용모형과 최근 연구가 활발히 진행되고 있는 Approximate Riemann 기법을 적용하여 개발된 유한체적모형을 적용하였다. 제방 부근에서 형성되는 흐름을 상세하게 모의하기 위하여 국내 하천시설물 설계에서 많이 활용되고 있는 FLOW-3D 모형을 적용하여 3차원 모의결과와 수리실험결과를 비교하였다. 수리실험에서 관측된 사석호안공의 이탈시 흐름현상을 재현하여 호안공 이탈에 영향을 미치는 국부유속 및 전단응력을 산정하여 호안설계에 적합한 설계인자를 분석하였다. 연구결과를 활용하여 사석호안공 설계 기법에 적용되는 수치모형을 통하여 산정되는 설계인자의 정확성을 향상시킴으로써, 정량적이고 합리적인 사석호안공 설계기법개발에 도움이 될 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.620-626
• /
• 2017

This study conducted chemical and physical hazard analysis on the acidity, peroxide value, color removal, and limit criteria of metal detector of roasted laver. The Hunter color L- and a-value of roasted laver was higher than the control, and the b-value was higher at $400^{\circ}C$. The limit criteria establish by metal detector was determined to a sensitivity of 60 because it detected 100% in a sensitivity of 60 to Fe and Sus. The acidity and peroxide values increased with increasing temperature. These results confirmed that roasted laver is safe when roasted to $300^{\circ}C$ for 5 seconds.

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.595-600
• /
• 2006

GOCI is the core paryload of the geostationary satellite COMS(Communication, Ocean and Meteological Satellite) for ocean monitoring. It is scheduled to be launched at the end of 2008. GOCI observes ocean color around the Korean Peninsula over $2500km\times2500km$ area. It used tilted two-axis scan mechanism to observe entire field of view. In this work, the pointing stability of the tilted two-axis method is analyzed and compared with that of gimbal method. The analysis results show that tilted two-axis method gives great stability and it is adequate for geostationary payload. The results can also be used to determine and analyze the mechanism specifications.

• Journal of the Korean Society for Railway
• /
• v.11 no.6
• /
• pp.543-549
• /
• 2008

The ride comfort is more important according to train speedup. Generally it is defined as the vehicle vibration. There are many studies on evaluation method of ride comfort for railway. But the ride comfort for Korean high speed train (HSR 350x) has been assessed by statistical method according to UIC 5l3R. In this paper, the ride indices, which were measured in the Korean high speed train. have been analyzed and reviewed by using the inferential statistics such as t-test, variance analysis (ANOVA) and regression analysis.

• Korean Journal of Food Science and Technology
• /
• v.53 no.6
• /
• pp.809-814
• /
• 2021

This study was performed to evaluate the microbiological quality of fresh cut fruits in Korea. Forty freshly cut fruit samples were assessed for aerobic mesophilic count (AM), aerobic psychrophilic count (AP), total coliform, generic Escherichia coli, yeast and mold (YM), Bacillus cereus, Staphylococcus aureus, Salmonella spp., and E. coli O157:H7. The average value for AM, AP, and YM was 4.51, 5.35, and 4.31 log CFU/g, respectively. The average of the total coliform was 2.42 log CFU/g, and E. coli was not detected in all samples. For foodborne pathogen bacteria, B. cereus and S. aureus were detected in 2.5 and 7.5% samples, respectively, and Salmonella spp. and E. coli O157:H7 were not detected in all samples. Among the samples, pear generally had the highest contamination level. Therefore, to assure the safety of fresh cut fruits, low temperature and thorough hygiene management should be implemented.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.5
• /
• pp.507-518
• /
• 2021

The application of an adhesive calcium carbonate-based hybrid insulation board with quasi-combustibility in the external thermal insulation composite system(ETICS) ensures effective thermal performance and fire safety. This study aimed to conduct a mechanical test of the quasi-non-combustible hybrid insulation board as well as its constituent materials to obtain the basic data for the structural design of the adhesive ETICS. Test specimens were fabricated based on domestic and foreign test standards to examine and evaluate their tensile, compressive, flexural, and shear strengths. The strength characteristics of the quasi-non-combustible hybrid insulation board were identified from the test results, which verified that the minimum required physical properties suggested by the current KS M ISO 4898 were met. Furthermore, the quasi-non-combustible ETICS used in this study was found to be suitable for use as an external insulation system for walls unless subjected to continuous gravity load, such as a heavy exterior finish.