The purpose of this study was to investigate the factors affecting the postsurgical mandibular stability for both one- and two jaw surgery. 18 for one-jaw surgerys and 24 for two-jaw surgerys among skeletal class III malocclusion patients who experienced orthodontic treatment and orthognathic surgery at Pusan National University Hospital were selected. Lateral cephalograms taken at the first visit, after presurgical orthodontic treatment, immediately after surgery and follow-up over 6 months, were traced. Based ANOVA, multiple linear regression analysis was completed for one-jaw surgery with postsurgical stability as the criterion and the magnitude of mandibular setback, the change of mandibular incisor height during surgery, the changes of mandibular plane angle and mandibular incisor angle during presurgical orthodontic treatment as affecting factors. Same analysis was completed for two-jaw surgery with postsurgical stability as the criterion and the magnitude of mandibular setback as affecting factor. The results were as follows : 1. In the one-jaw surgery cases, the magnitude of mandibular setback, the change of mandibular incisor height during surgery, the changes of mandibular plane angle and mandibular incisor angle during presurgical orthodontic treatment explained the variability in postsurgical stability with a significant $R^2$ value of 0.84. 2. In the two-jaw surgery cases, the magnitude of mandibular setback explained the variability in postsurgical stability with a significant $R^2$ value of 0,28.
Kim, Sang-Woo;Hwang, Kyung-Gyun;Lim, Byung-Sup;Park, Chang-Joo;Chung, Il-Hyuk;Paik, Seung-Sam;Shim, Kwang-Sup
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
v.32
no.4
/
pp.360-373
/
2006
The purpose of this research was to investigate whether pulsed electromagnetic field (PEMF) stimulation applied to the rabbit cranial defects grafted with ${\beta}$-tricalcium phosphate (${\beta}$-TCP) could affect the new bone formation. With 16 New Zealand white rabbits under the same condition, bilateral calvarial bone defects were formed around the sagittal suture line. The defect on the left side was grafted with ${\beta}$-TCP, while on the right side was grafted by harvested autogenous bone. PEMF was applied to 8 rabbits for 8 hours per day. The bony specimen were divided into 3 groups, the group 1 was autogenous bone grafted specimen, the group 2 was ${\beta}$-TCP grafted with PEMF, and the group 3 was ${\beta}$-TCP grafted without PEMF. We investigated the bone regeneration & growth factor expression at 2, 4, 6, and 8 weeks. As a result, BMP 2 was expressed in the group 1 from 2 weeks, the group 2 from 4 weeks, and the group 3 from 6 weeks. BMP 4 was expressed in the group 1 from 2 weeks, in the group 2 and the group 3 from 4 weeks. 4. There was no significant difference in expression pattern of BMP 7, PDGF, VEGF, and TGF-${\beta}$1 during grafted bone regeneration in group 1, 2, and 3. According to our results, PEMF stimulation could be effective on the new bome formation in animal study, and have a feasibility of clinical use.
Midline Granulcma(Malignant midline reticulosis) of upper respiratory tract was known as one of the fatal diseases that involve the nasal cavity, paranasal sinuses, pharynx and larynx, with progressive localized necrotizing inflammation and granuloma formation. The disease was first described in 1897 by McBride and after Stewart many clinical and histological studies have been done in 1933. But its etiology is still unclear and therapeutic methods are still under development. The authors carried out a clinical study of 15 cases which were diagnosed and treated as midline granuloma, including 7 cases which received combination radiation and steroid therapy from January 1964 to December 1980. The results are as follows: 1) Age and Sex distribution: 6 cases fell into the ages from 30 to 39 years: 13 cases (87%) were male and 2 cases (13%) were female. 2) Primary lesion sites were nasal cavity and paranasal sinuses area (8 cases: 53%), palatine tonsil (3 cases: 20%) and pharynx (2 cases: 13%) in order. 3) Common symptoms were nasal stuffiness and sore throat (6 cases: 40%), headache (5 cases: 33%), nasal discharge and facial edema (3 cases: 20%) in order. 4) Microorganisms were identified in 4 cases: staphylococcus in 2 cases, pseudomonas in 1 case and streptococcus in 1 case. 5) All 7 cases who received combination radiation and steroid therapy revealed complete regression and no recurrence. 6) Among the 5 cases, who received steroid and antibiotic therapy, 2 cases died and other 3 cases improved temporarily and then developed aggrevation of symptoms.
Acute maxillary sinusitis is a common disorder affecting children. Untreated acute sinusitis can develop into chronic sinusitis, and complications, such as orbital cellulitis or abscess, can occur. Maxillary sinusitis of odontogenic origin is not a well-recognized condition and is frequently missed in children. As an odontogenic source of sinusitis, the dentigerous cyst is one of the most prevalent types of odontogenic cysts, and it is associated with the crown of an unerupted or developing tooth. This report concerns a nine-year-old boy who was diagnosed with maxillary sinusitis originating from a dentigerous cyst with supernumerary teeth. The boy visited our pediatric clinic presenting with rhinorrhea and nasal obstruction and was initially diagnosed with maxillary sinusitis only. With antibiotic treatment, his symptoms seemed to improve, but after 2 months, he came to our clinic with left facial swelling with persistent rhinorrhea and nasal obstruction. Radiographic examinations of the sinuses were performed, and he was diagnosed with maxillary sinusitis originating from a dentigerous cyst with supernumerary teeth. After a surgical procedure involving the removal of the dentigerous cyst with supernumerary teeth, the symptoms of sinusitis gradually diminished. There are only very few cases in the pediatric medical literature that remind us that odontogenic origin can cause maxillary sinusitis in children. Our patient can act as a reminder to general pediatricians to include dentigerous cysts in the differential diagnosis of maxillary sinusitis.
Acrodysostosis is an extremely rare disorder characterized by short fingers and toes with peripheral dysostosis, nasal hypoplasia, and mental retardation. We report a 16-year-old Korean boy with acrodysostosis who had characteristic clinical features and cervical spine stenosis manifested by neurologic symptoms. On presentation, he complained of difficulty in raising his arms, and suffered from intermittent pain and weakness in both upper extremities. He had short stature and dysmorphic facial features, including a broad, depressed nasal bridge, small, upturned nose, bilateral epicanthal folds, and mild hypertelorism. Moderate mental retardation and sensorineural hearing loss in both ears were also present. Radiological findings included broad, short metacarpals and phalanges with cone-shaped epiphyses, bilateral Madelung deformities, hypertrophied first metatarsals, and thickening of the calvarium. Magnetic resonance imaging findings included stenosis of the cervical spine, platybasia with compression into the cervicomedullary junction, and downward displacement of the cerebellar tonsils. Here, we report a case of acrodysostosis with symptoms and signs of cervical spinal stenosis first in Korea. If it is diagnosed in the early stages, possible life-threatening complications, including spinal canal stenosis, can be managed properly and permanent neurologic sequelae might be avoided. Therefore, it is important to consider acrodysostosis in the differential diagnosis of peripheral dysostosis.
Journal of the korean academy of Pediatric Dentistry
/
v.46
no.2
/
pp.147-157
/
2019
This study aimed to evaluate skeletodental characteristics of patient with maxillary lateral incisor agenesis (MLIA) in mixed dentition. It involved the children in early mixed dentition who visited Pusan National University dental hospital for orthodontic purposed and had intact primary canines. 38 children with MLIA and 38 controls with the same chronological age satisfying the inclusion criteria were selected. The craniofacial structures and dental arch dimensions of the MLIA were evaluated using model & cephalometric analysis and compared to controls. The rate of unilateral MLIA was high in male and the rate of bilateral MLIA was high in female. In model analysis, the width / length ratio of maxillary anterior portion of the MLIA group were higher and arch perimeter of the maxilla of the MLIA group were smaller than those of the control group (p = 0.003, 0.04). Cephalometric analysis showed that there were no significant differences in terms of skeletal, dental analysis. In soft tissue profile, nasolabial angle was larger in MLIAs than in controls (p = 0.039). Considering these skeletodental characteristics of MLIA, early diagnosis and proper management is highly recommended to minimize the possibility of functional defect.
Kim, Suk Ki;Byun, Kisik;Lee, Sang Yeob;Park, Jae Woo;In, Chi Yeon
Journal of the Korea Academia-Industrial cooperation Society
/
v.22
no.1
/
pp.74-80
/
2021
This study investigated the process quality level of a K5 gas mask, which recently acquired its operational capability, through statistical process analysis for the mass production stages and their lots. The tensile adhesion strength was the only operating requirement in the manufacturing process of the K5 gas mask. For this purpose, the results of tensile adhesion strength between the lens and facial rubber during the initial and second mass production stages were analyzed using conventional statistical and statistical process analysis methods. The conventional statistical results indicated that the second mass production stage was better than the initial mass production stage. In cases of a control chart and process capability of tensile adhesion strength, the process quality level was also improved by following the mass production stages. The improvement was caused by process stabilization and work skill elevation. These results and methods are expected to be conducted and utilized in the third mass production stage. Moreover, quality improvement of K5 gas mask mass production can be achieved using the Lean 6 sigma procedure, MDAIC (Define, Measure, Analyze, Improve, Control).
Pollinators are not only crucial for plant reproduction, but also important for crop production. These pollinators are affected by the diversity of plants within orchards. Thus, the study investigated the effect of blooming on the ground cover on pollinator diversity, network, fruiting rates and subsequent apple size during harvest season in apple blooming period. Total ten orchards were selected; Five with ground covered mostly by dandelion while the another five without ground cover. The orchards with dandelion bloom showed 16 pollinator groups and 801 pollination network interaction, while 14 pollinator groups and 589 interaction were found from orchards without ground cover blooms. es. Overall pollinators' abundances were not different. But bumble bees and caliphorid flies were more abundant in orchards with ground cover blooming. There was no significant in fruiting rates, but the apple size was significantly bigger in orchards with ground cover. These results may indicate that blooming on the ground cover during apple flowering season would increase pollinator diversity and influence fruit quality later on in apple orchards, and pose importance of floral diversity for sustainable apple production system.
Introduction : Oral motor function is basic function of sensory exploration, feeding, and communication, that develops from the fetal stage to childhood. Problems with oral motor function result in difficulty within handling food in the oral cavity, decreased swallowing and feeding skills, difficulty with communication, and problems with oral hygiene. To treat these symptoms, oral motor therapy is provided for normalizing sensory adaptation in the oral cavity, and increasing postural control, oral movement and oral motor function. Discussion : The oral motor facilitation technique (OMFT) was developed for increasing general and integrated oral motor function based on the following: 1) understanding orofacial muscular physiology; 2) a comprehensive approach to sensory·adaptation·behavior·cognition; 3) sensorimotor stimulation by a manual approach; 4) motor control and motor learning theory. The OMFT is a new evidence-based treatment protocol, for children and adults with neuromuscular and oral motor problems. Conclusion : The goal of this article is to provide a theoretical background for OMFT development and the basic concept for the clinical application of OMFT. We hope that this article will help oral motor therapy experts to provide effective therapy in a more professional way.
Recently with the advance in digital dentistry, the fabrication of dentures using computer-aided design and computer-aided manufacturing (CAD-CAM) is on the rise. The denture designed through a CAD software can be produced in a 3-dimensional manufacturing process. This process includes a subtractive processing method such as milling and an additive processing method such as 3D printing and in which it can be applied efficiently in more complex structures. In this case, complete dentures were fabricated using Stereolithography (SLA)-based 3D printing to shorten the production time and interval of visits in patient with physical disabilities due to cerebral infarction. For definitive impression, the existing interim denture was digitally replicated and used as an individual tray. The definitive impression obtained with polyvinyl siloxane impression material was including information about the inclination and length of the maxillary anterior teeth, vertical dimension, and centric relation. In addition, facial scan data with interim denture was obtained so that it can be used as a reference in determination of the occlusal plane and in arrangement of artificial teeth during laboratory work. Artificial teeth were arranged through a CAD program, and a gingival festooning was performed. The definitive dentures were printed by SLA-based 3D printer using a FDA-approved liquid photocurable resin. The denture showed adequate retention, support, and stability, and results were satisfied functionally and aesthetically.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.