• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.448-452
• /
• 2004

Trauma from occlusion(TFO) is injury to the periodontal tissue as a result of occlusal forces. Mobility is a common clinical sign of occlusal trauma. In acute occlusal trauma, this may be accomanied by pain, tenderness to percussion, thermal sensitivity, and pathologic tooth migration. Chronic occlusal trauma may be marked by excessive wear and gingival recession. Radiographic finding include a widened periodontal ligament space, radiolucence and condensation of the alveolar bone and root resorption. TFO is related to the pathogenesis of periodontal disease. It can cause increased tooth mobility TFO itself does not initate or aggravate marginal gingivitis or initiate periodontal pockets. Active trauma can accelerate bone loss, pocket formation and gingival recession depending on the presence of local irritants and inflammation. Gingival recession associated with occlusal forces includes traumatic crescent, McCall's festoon and Stillman's cleft. TFO plays a minor role in the pathogenesis of early to moderate periodontitis. A 5-year-old male visited Yonsei University Pedodontics clinic with a chief complaint about gingival recession. Mobility, excessive wear, gingival recession were detected by clinical exam on the both mandibular deciduous ca nine. On the radiographic view, vertical alveolar bone loss was observed on both mandibular deciduous canine.

• Computational Structural Engineering
• /
• v.6 no.2
• /
• pp.95-102
• /
• 1993

A modeling method is described to provide a smaller structural dynamic model which can be used to compare finite element model of a structure with its experimental counterpart. A structural dynamic model is assumed to be represented by dynamic stiffness matrix. To validate a finite element model, it is often necessary to condense a large degrees of freedom (dofs) to a relatively small number of dofs. For these purpose, static reduction techniques are widely used. However, errors in these techniques are caused by neglecting frequency dependent terms in the functions relating slave dofs and master dofs. An alternative method is proposed in this paper in which the frequency dependent terms are considered by expressing the reduced dynamic stiffness matrix with orthogonal polynomials. The reduced model has finally a minimum set of dofs, such as sensors and excitation points and it is under the same condition as the physical system. It is proposed that the reduced model can be derived from finite element model. The procedure is applied to example structure and the results are discussed.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.67-68
• /
• 2001

제지공장은 에너지 다소비 업종이며 고도의 장치산업이기 때문에 초지 설비의 효과적 운영을 통한 생산성 극대화가 경제성과 직결되어 었다. 또한 24시간 연속생산을 하는 초지 설비로 소비자가 선호하는 품질의 종이를 생산하기 위해서는 공정의 안정성 이 매우 중요하다. 이는 공정의 불안정화는 생산제품의 품질 변화를 유발함으로써 균일 성을 저하시키는 악영향을 미치기 때문이다. 제지 공정의 안정화를 저해하는 인자에는 지절, 지종 변화, 조업중단, 조업재개 둥과 공정의 특성상 수반되는 돌발사태 등이 있을 수 있다. 이들 인자 가운데 가장 심각하게 공정의 안정성을 악화시키는 것은 지절의 발 생이라 할 수 있다. 지절이 발생되면 생산성 저하 등의 여러 문제점이 발생하기도 하지 만 다량의 파지가 발생되기 때문에 공정 안정성 면에서 볼 때에도 부득이하게 생성된 다량의 파지를 공정에 재투입하기 위해 재해리해야하므로 많은 양의 백수가 소모되며 이에 따라 예기치 않은 공정 백수의 사용으로 전체 백수계에 갑작스런 변동이 생기게 된다. 백수가 파지의 해리에 사용됨에 따라 공정 내에는 추가적인 청수가 공급되어야 하므로 전체적으로는 청수의 사용량도 늘어난다. 또한 증가된 파지의 재사용도 대부분 의 공장에서 broke chest의 용량이 한정되어 있으므로 이의 적절한 컨트롤은 중요하다. 더욱이 점차 공정이 고폐쇄화됨에 따라 공정 컨트롤에 대한 여유가 적으므로 백수와 공정의 관리는 점차 어려워지고 있다. 공정 시율레이션은 현존하는 공정을 수학적으로 모델화하여 이를 컴퓨터 하드 왜어를 이용해 실제 공장에서 일어나는 상황을 모사하는 것이다. 이러한 공정 모사는 새로운 공장을 설계하기 전에 타당성 조사와 여러 가지 사례조사를 실시할 때, 기존 공 장의 개조나 증설 또는 기존 공장의 운전조건을 실제로 변경하기 전에도 미리 모사를 함으로써 실제 시험 운전을 하는 경우 보다 많은 비용과 시간을 절약할 수 있다. 본 연 구는 백상지 생산 공정 설계도면을 참고하여 상용 시율레이터로 시율레이션 모델을 구 축하고 이를 기반으로 지절 상황을 모사하였으며, 지절 후의 공정 불안정화 상황을 파 악하였다. 또한 이러한 상황의 대책을 강구하기 위해 다양한 공정 조절 방안을 시율레이션 모댈에 적용하여 그 결과를 해석하였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.1
• /
• pp.23-27
• /
• 2010

The purpose of this study was to evaluate the reliability of 6-axis model surgery simulator (6AMSS) for orthognathic surgery. A rectangular parallelepiped plastic block was assembled to model-mounting plate of 6AMSS. Left-right (X), anterior-posterior (Y), up-down (Z) translation and pitching (${\phi}X$), rolling (${\phi}Y$) and yawing (${\phi}Z$) rotation was planned and performed using 6AMSS. The actual translation and rotation were measured with dial gauge and precisional protractor, respectively. Comparison between the planned and actual movements of plastic block for each variable were made using paired t- test. Statistical analysis for X, Y, Z, ${\phi}X$, ${\phi}Y$ and ${\phi}Z$ movement have shown no significant differences between planned and actual movement (P > 0.05). This indicate that model surgery performed with the aid of the 6AMSS is accurate in 3D translation and rotation. The 6AMSS is practically useful for accurate fabrication of surgical splint for orthognathic surgery.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.2
• /
• pp.154-160
• /
• 2018

When making conventional removable partial denture for the remaining teeth where the remaining teeth are only on one side, rotation of the denture occurs -in function- on the axis of the connected remaining teeth. If the edentulous portion is long, it becomes harder to obtain retention and stability for the abutment as the importance of the mucous membrane support is elevated. Such movements of denture decrease denture retention and stability, put excessive stress on the abutment, and give bad influence on periodontal health. Therefore, additional implant placement can be of a good choice in gaining additional retention and stability for partial denture. Thus hereby we report this clinical case as successful results were obtained by placing implants symmetrical to the remaining teeth and putting implant-supported surveyed crowns on the implants, allowing the partial denture to be designed to accept varying components and to have suitable path of insertion.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.3
• /
• pp.156-163
• /
• 2003

Most watermarking techniques insert watermarks into transform coefficients in the frequency domain because we can consider robust or imperceptible frequency bands against malicious attacks to remove them. However, parameterization of 3-D data is not easy because of irregular attribution of connectivity information, while 1-I) or 2-D data is regular. In this paper we propose a new watermarking scheme for 3-D polygonal mesh models in the DCT domain. After we generate triangle strips by traversing the 3-D model and transform its vertex coordinates into the DCT domain, watermark signals are inserted into mid-frequency bands of AC coefficients for robustness and imperceptibility. We demonstrate that our scheme is robust against additive random noise, the affine transformation, and geometry compression by the MPEG-4 SNHC standard.

• Convergence Security Journal
• /
• v.13 no.6
• /
• pp.51-59
• /
• 2013

Cyberspace, based on the dramatic development of information and communications technology, has brought enormous benefits to mankind. However, concerns over cyber terrorism and cyber attack are becoming serious. It is time to expand the global dialogue on international security issues in cyberspace. It is imperative to have a common understanding that cyberspace, the infrastructure for prosperity, should not be utilized as a space to create conflicts among states, and that all states agree to build confidence and peace in cyberspace. For this purpose, there are 3 tracks of international cooperations: 1)international cooperation such as UN and Conference on Cyberspace, 2)regional cooperations such as ARF and OSCE. 3)bilateral cooperations such US-Russia Cybersecurity Agreement, US-China presidential level dialogue. This paper will analyze the 1st track of international cooperations of UN and Conference on Cyberspace. With this, Korean government can prepare the forthcoming GGE activities and make our own strategy to deal with the global norms of good behaviour in cyberspace.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.2
• /
• pp.174-188
• /
• 1999

The purpose of this study is to evaluate the precision and accuracy of a three dimensional cephalogram constructed by using the frontal and lateral cephalogram of twelve human dry skulls. After achieving the three dimensional image reconstruction program, we tried to apply this program to two dentofacial deformity patients. 1. Conventional nasion relator in cephalostat was used to reproduce the same head position for the same dry skull. The mean difference of the three dimensional cephalogram for the same dry skull was $0.34{\pm}0.33mm$. Closeness of repeated measures to each skull reveals the precision of this method for the three dimensional cephalogram. 2. Concerning the accuracy, the mean difference between the three dimensional reconstruction data and actual lineal measurements was $1.47{\pm}1.45mm$ and the mean magnification ratio was $100.24{\pm}4.68%$. This Diffrerence is attributed mainly to the ill defined cephalometric landmarks, not to the positional change of the dry skull. 3. Cephalometric measurement of lateral and frontal radiographs had no consecutive magnification ratio because of the different focus-object distance. The mean difference between the frontal and lateral cephalogram to the actual lineal measurements was $4.72{\pm}2.01mm$ and $-5.22{\pm}3.36mm$. Vertical measurements were slightly more accurate than horizontal measurements. 4. Applying to the actual patient analysis, it is recommendable to use this program for analyzing the asymmetry or spatial change after operation. The orthodontic bracket would be a favorable cephalometric landmark for constructing the three dimensional images.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.3
• /
• pp.301-307
• /
• 2012

50-year-old female and 50-year-old male were referred to the department of the oral and maxillofacial surgery of Kyungpook national university dental hospital with asymptomatic lesions on their posterior mandibular body areas. They were discovered incidentally on panoramic radiographs during routine dental examination. Physical examination revealed no remarkable findings. Each panoramic radiograph showed well defined radiolucent lesions without hyperostotic border on their posterior mandibular body area. At first they were diagnosed as benign tumors because they looked like multilocular pattern and one of the patient showed discontinuity of mandibular canal within the lesion. CT scans demonstrated well demarcated and irregular lingual depression filled with fat tissue and they were diagnosed as developmental salivary gland defects. One of the lesion showed no change on follow-up panoramic radiograph after 4 months. Developmental salivary gland defects resembling benign tumor are atypical cases and it is suggested that confirmatory imaging using CT or MRI should be taken.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.2
• /
• pp.161-164
• /
• 2002

In recent, distraction osteogenesis has been used to correct skeletal malformations and discrepancies in the craniofacial area. It also seems to be considered as an alternative in the treatment of severe midfacial hypoplasia. There are some types of distractors for midfacial distraction such as subcutaneous distractors and rigid external distractors. We used a rigid external distractor for correction (RED) of craniofacial hypoplasia. Seven patients underwent a midfacial distraction osteogenesis with a rigid external distractor between April 2000 and July 2001. Three patients suffered from Apert's syndrome, three patients from Crouzon's syndrome, and one patient suffered from midfacial hypoplasia due to midfacial radiotheraphy during childhood. On average, the mean distance of distraction was 19.8mm ($10{\sim}25mm$) and the distraction lasted for 24 days. The patients showed no severe complications like infections, optic disturbance, or wrong distraction vectors. One patient complained pain on the site of the occipital fixation of the distractor. In one patient who underwent subtotal craniectomy 3 months before Le Fort III distraction, the distractor was dislocated as the cranial bone was too weak to support the distractor. This report reveals that the application of rigid external distractor and transfacial pull results in an exact control of the distraction vectors and an excellent correction of midfacial hypoplasia without any severe complications.