• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.123-130
• /
• 2002

Aerodynamic results for an airplane model produced in a subsonic wind tunnel testing inadvertently include errors which are added during model preparation, data acquisition, manipulation, and/or describing the results. Predicting or analyzing uncertainty for the final results is necessary for trusting them and for applying them to real airplane. This paper describes the analytic and systematic method for calculating and describing the uncertainties of aerodynamic coefficients.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.92-98
• /
• 2003

The optimum design of Hanyang low speed wind tunnel has been performed to augment flow uniformity and to reduce turbulence intensity of wind tunnel test section have to be known for reliability of wind tunnel test. The non-uniformity and turbulence intensity of Hanyang low speed wind tunnel were measured with Pilot tube and X-type hot-wire probe at various wind speeds. As the results, the non-uniformity decreases as the wind speed increases. The non-uniformity is relatively high in the proximity of the diffuser. The turbulence intensity is a little higher than design requirement in the middle of the test section.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.508-511
• /
• 2009

풍력터빈 블레이드에서 발생하는 공력소음원의 위치 특성을 파악하기 위해 마이크로폰 어레이를 사용하여 소음원 풍동시험을 수행하였다. 풍동시험은 KARI 중형 아음속풍동에서 수행되었으며, 소음원의 위치파악을 위해 시간영역 회전체 빔포밍기법을 사용하였다. 기존 시간영역 회전체 빔포밍 기법의 경우 시험데이터 해석에 많은 시간이 소요되나, 본 논문에서는 원통형 좌표계에서 회전각 격자간격과 해석기간 간격 사이의 상관조건을 도입하여 데이터 해석시간을 기존 방법 대비 1/5로 단축하였다. 시험결과 나타난 주파수에 따른 블레이드 공력소음원의 위치 특성은 2kHz 이하 대역에서는 블레이드 반경 80% 부근에 주소음원이 위치하며, 4kHz 이상 대역에서는 블레이드 끝단 부근에 주 소음원이 위치하고 있다.

• 한국항공운항학회:학술대회논문집
• /
• 2006.05a
• /
• pp.85-89
• /
• 2006

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.42-49
• /
• 2005

A new blockage correction method has been developed for the wall interference correction of closed test-section subsonic wind tunnels based on the nonlinear relationship between separation blockage and separation drag. This method can be applied continuously from the linear lift-slope region to the highly nonlinear post-stall region by on-line processing. The present method was validated by comparing the results with a classical method based on the test results of a bluff body and a measured-boundary-condition method. It was shown that the present method is in good agreement with the measured-boundary-condition method, enabling better wall corrections than the bluff body method in both near-stall and post-stall regions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.9
• /
• pp.816-822
• /
• 2011

In this study, a program has been coded to evaluate propeller thrust rapidly following the effects of propeller shapes and the environmental facts. At this time, Semi-infinite Helical Vortices model is used to predict the induction factor which is introduced by Kawada. This program is based on Wrench's Propeller lifting line theory, and it can predict aerodynamic coefficients such as thrust, power, and efficiency. First of all, this program is compared with test results of NACA reports to verify of the reliability. Secondly, subsonic wind tunnel test has been performed following variations of propeller's rpm and inflow velocities.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.167-170
• /
• 2007

In the present paper, wall correction method is reviewed and applied to the numerical experimental results obtained at the wind tunnel condition. The corrected lift coefficient agrees well with the reference data generated from the grid having very far boundary. However the corrected drag coefficient presents some deviation from the reference data.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.784-788
• /
• 2011

Wind tunnel test on 20" class propellers are carried out at KARI's low speed wind tunnel (LSWT). The test was done to select most efficient propeller for middle size electric propulsion UAV of KARI. The propellers are commercially available 20" class folding type propellers made of carbon fiber composite material. As the result, 21"${\times}$15.5" propeller was selected whose efficiency is 66% at cruise condition.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.9
• /
• pp.721-727
• /
• 2021

In this paper, aerodynamic characteristics of missile configuration with various grid fins in subsonic flow. To investigate the effects of grid fin shape, four types of experimental models were used. In addition, to examine aerodynamic characteristics of missile configurations with various grid fins according to effects of Reynolds numbers and configurations of grid fins, 6-components aerodynamic forces and moments were measured by internal balance in wind tunnel test.

• 한국항공운항학회:학술대회논문집
• /
• 2005.11a
• /
• pp.194-199
• /
• 2005