• Clean Technology
• /
• v.14 no.2
• /
• pp.87-94
• /
• 2008

The catalytic properties of large pore zeolite (mordenite, beta, and Y) with 12-membered rings were comparatively evaluated in the synthesis of diethylamines from ethanol amination. The number of strong acid sites, which obviously promoted the formation of mono- and diethylamines, was decreased with the increase of Si/Al ratio of the zeolites that were used. H-beta and H-Y zeolites with multidimensional pore channels favorably formed diethylether by the dimerization of ethanol, due to their large cage volumes and low acid strength. On the other hand, H-mordenite which has one dimensional straight channel was shown to be suitable for the formation of mono- and diethylamine which are well known as the useful intermediates of fine chemicals.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.477-485
• /
• 1999

The grafting of 2,3-epoxypropylmethacrylate (GMA) onto polypropylene fabric was carried out by the $\gamma$-ray preirradiation grafting technique. Subsequently, the GMA-grafted polypropylene fabric was reacted with iminodiacetic acid (IDA) in different mixed solvents to prepare the fibrous metal adsorbent. The grafting extent was found to be dependent on the reaction time, temperature, preirradiation dose and dose rate. The effects of various mixed solvents on the IDA amination onto GMA-grafted polypropylene fabric were investigated. Compared with other mixed solvents, the extent of amination was highest in the dimethylsulfoxide (DMSO)/water, but the reaction did not occur in the water. The adsorption characteristics of various metal ions by the prepared adsorbent were examined when it was immersed in the 100 ppm metal ion solution. The amount of adsorption followed the order:$Pb^{2+}>Co^{2+}>Fe^{2+}$.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.527-534
• /
• 2006

The purpose of this study is the development of more effective filter-type polymer adsorbent for removal of anionic pollutants from wastewater. In order to synthesize the polymer adsorbent that possesses anionic exchangeable function, carboxyl(-COOH) group of PP-g-AA nonwoven fabric was converted into amine($-NH_2$) group by the chemical modification using diethylene triamine(DETA). FT-IR data indicate that amine group was introduced into PP-g-AA through amidation of grafted acrylic acid by reaction with DETA. The degree of amination increased with increase in the reaction time and temperature of the chemical modification process, and was significantly improved by the pre-swelling treatment of PP-g-AA with solvent and addition of metal chlorides as a catalyst in following order as $NH_4OH>MeOH{\geq}HCl{\geq}H_2O\;and\;AlCl_3>FeCl_3{\geq}SnCl_2{\gg}ZnCl_2{\geq}FeCl_2$, respectively. However, the addition of catalyst limited the reusability of DETA, hence was less useful from the viewpoint of cost effectiveness and waste management. The anion exchange capacity of the aminated PP-g-AA(PP-g-AA-Am) increased with increase in the degree of amination, but it reached maximum value at the degree of amination as about $50{\sim}60%$. The anion exchange capacity of PP-g-AA-Am was higher than those of commercial anion resins.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.217-223
• /
• 2006

Ion exchange fibers, high functionalized onto hybrid polyolefine fiber's surface, were synthesized by $\gamma-ray$ mutual radiation. Degree of grafting (DG) of copolymer increased with increasing GMA monomer concentration and the maximum rate of DG was 355% at 50 GMA. The graft reaction occurred in polar solvent and DG was 190% maximum value in $1.0\times10^{-3}$ Mohr's salt and 0.1 M sulfuric acid, respectively. The amination for graft copolymers varied depending on amine reagents, and the reactivity for copolymers was highest for methylamine, and that of triethylamine lowest. It was shown that water uptake and ion exchange capacities increased with increase in the rate of amination while surface area decreased rapidly as proceeding for graft reaction and amination.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.160-167
• /
• 2002

We synthesized HPP-g-GMA copolymer using pre-irradiation method by E-beam and aminated HPP-g-GMA using amination reaction. Degree of grafting increased with increasing GMA monomer concentration and showed the maximum value of 130% at 1.46 M of GMA. The degree of amination increased with increasing the degree of grafting. When the degree of grafting was 100%, degree of amination showed the maximum value of 37.4%. The ion exchange capacity of aminated HPP-g-GMA was about 3.78 meq/g, and it showed remarkable adsorption ability of hollow fiber ion exchanger. Through the BET analysis, the surface area of aminated HPP-g-GMA was 54.83 $\m^2/g$ and the mean pore size was $26\AA$. These showed the decrease of surface area and the slight increase of the mean pore size. SEM results show that the thickness of fiber increased after the step of reaction and there pore blocking phenomena was not observed. The aminated HPP-g-GMA was synthesized successfully and found to be suitable for the adsorption and separation of anion.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.11
• /
• pp.607-612
• /
• 2017

The effect of carbonic anhydrase on $CO_2$ absorption rates and the heat of reaction were evaluated in various amine solutions for post combustion $CO_2$ capture process. The $CO_2$ absorption rate was analyzed in 30 wt% MEA, AMP, DMEA, MDEA aqueous solutions with and without carbonic anhydrase (250 mg/L) from bovine erythrocyte. $CO_2$ absorption rates were increased in all solutions with carbonic anhydrase. The effect of carbonic anhydrase on absorption rates was more in tertiary amine (DMEA and MDEA) solutions than in primary amine (MEA) and hindered amine (AMP) solutions. The heat of reaction of MEA, DMEA, MDEA aqueous solutions with and without carbonic anhydrase were measured using reaction calorimeter. Carbonic anhydrase decreased the heat of absorption in all solutions. The results suggested that tertiary amines that have the excellent desorption ability were suitable for applying carbonic anhydrase to the post combustion $CO_2$ capture process and the effect of carbonic anhydrase was best in MDEA solution.

• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.287-292
• /
• 1992

The rate constants of the nucleophilic addition reaction of amines (piperidine and diethylamine) to phenylvinylketone in various solvents have been determined by UV spectrophotometry at $25^{\circ}C$. On the basis of the high sensitivity of the rate to the polarity of the medium, it may be concluded that the reaction intermediate has zwitterionic character. The effect of the solvents on the rate of the bimolecular nucleophilic addition reaction is described well by the Kirkwood equation: The transition state of the reaction has a cyclic structure formed through an intramolecular hydrogen bond. The addition reaction of primary and secondary amines to phenylvinylketone in all solvents take place considerably faster than that of tertiary amine and this results also can be explained by the intermediate products in the reaction have a cyclic structure formed through an intramolecular hydrogen bond for the primary and secondary amines but not for the tertiary amine.

• Journal of the Korean Chemical Society
• /
• v.38 no.9
• /
• pp.682-686
• /
• 1994

New synthetic method of aminophosphonic acids by the amination of organoboranes containing phosphorus was developed. Thus, the hydroboration of diethyl 2-propenylphosphonate, diethyl 2-methyl-2-propenyl-phosphonate, diethyl 3-butenylphosphonate with borane-THF, followed by amination of the resulting organoboranes with hydroxylamine-O-sulfonic acid gave diethyl 3-aminopropylphosphonate, diethyl 3-amino-2-methyl-2-propylphosphonate and diethyl 4-aminobutylphosphonate, respectively. 3-Aminopropylphosphonic acid and 4-aminobutylphosphonic, acid were obtained by the hydrolysis of the corresponding esters, respectively.

• Korean Chemical Engineering Research
• /
• v.44 no.4
• /
• pp.417-423
• /
• 2006

A series of amine functionalized MCM-41 catalysts were prepared by aminopropyltrimethoxysilane grafting and their catalytic performance in Knoevenagel reaction of selected substrates was investigated. Water resistant and catalytically active amine grafted MCM-41 was prepared by post-synthetic silylation using methyltrimethoxysilane ; hydrogen bonding of the water molecules formed during the condensation reaction to the active N group was suppressed, which led to high TON of the reaction. Amine functionalized MCM-41 prepared by coating method produced high conversion, but the TON of the catalyst was much lower than that of the amine grafted MCM-41; pore volume of the functionalized MCM-41 decreased substantially and large portion of the immobilized amine is believed to be hydrogen bonded to each other, which can result in decrease in the basicity of the N group. A secondary amine group was prepared by room temperature condensation between aminopropylsilane and chloropropylsilane, and the MCM-41 grafted with the secondary amine group demonstrated the highest catalytic activity among the catalysts prepared.

• The tire
• /
• s.65
• /
• pp.10-17
• /
• 1976

아민계열화방지제(이하 아민이라고 한다)를 첨가한 천연고무 순고무가유물에 대해서 고온으로 반복대신장피로를 주어서 응력변화, 피로수명에 주는 열화방지제의 영향을 조사하였다. 아민첨가시료에 대해서 고온으로 반복 신장피로를 가하면 무첨가시료와 동양, 화학응력 연화가 출현했다. 아민첨가시료의 화학응력연화의 임계온도는 NR-DPG로 110℃, NR-MBTS로 110℃, NR-TT로 130℃이며 가교구조의 내열성에 일치하며 무첨가시료의 임계온도보다도 10~30℃높아졌다. 아민첨가시료의 반복신장피로수명은 60℃로 극대화 되어 (NR-DCP만이 40℃이었으나) 무첨가시료의 피로수명은 40℃에서 극대화됐다. 전보에서 보고한 피로수명과 변형률과의 관계식(F=A(εb-ε)n)은 100℃에서 아민첨가시료에 대해서만이 성립하고 무첨가시료에 대해선 성립되지 않았다. 이들의 결과는 아민을 고무에 첨가함으로써 고무의 열산화반응이 억제되었음에 원인하고 있다고 생각된다.