• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.42-42
• /
• 2003

목적 : 조사면 크기에 따른 금속쐐기와 가상쐐기에 의한 6 MV 와 15 MV 엑스선의 출력 및 상부와 하부 에 설치하는 금속쐐기의 출력을 비교하고자 한다. 대상 및 방법 : Varian Clinac21EX(미국)는 두부의 상부와 하부에 설치하는 각각의 금속쐐기와 제한기에 의한 가상쐐기 기능을 가지고 있다. 금속쐐기의 쐐기각은 네 가지 (15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$)이며 투과력에 무관하게 한 쐐기각에 대한 쐐기는 사하부는 각 1 개이고, 가상쐐기는 일곱 가지 ($10^{\circ}$, 15$^{\circ}$, 20$^{\circ}$, 25$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$) 이다. 각 쐐기에 대하여 3$\times$3～20$\times$20 $\textrm{cm}^2$ 의 조사면 크기에서 6 및 15 MV 엑스선의 쐐기출력인수 (wedge field output factor)를 $d_{max}$와 10 $\textrm{cm}^2$ 깊이에서 측정하였다. 조사면크기와 측정깊이에 따른 쐐기출력인수의 변화추이를 관찰하였다. 쐐기출력인수 O $F_{Wdg}$는 다음과 같다. O $F_{Wdg}$(r)= $D_{Wdg}$(r)/ $D_{op}$ ( $r_{0}$) 여기서 $r_{0}$와 r은 각각 민조사면의 기준조사면크기, 쐐기조사면크기이다. 하부쐐기에 대한 상부쐐기의 출력인수의 상대적인 백분율 차이, %ROD=l00$\times$(O $F_{upWdg}$/O $F_{lowWdg}$ lowWdg/ - 1)를 구하였다. 조사면크기와 깊이에 따른 %ROD의 변화추이를 평가하였으며 쐐기 각각에 대하여 출력인수를 측정해야하는지 평가하였다. 결과 : 금속쐐기에 대한 쐐기출력인수는 방사선의 투과력과 깊이에 관계없이 조사면 크기가 커짐에 따라 증가하였으나 가상쐐기의 쐐기출력인수는 쐐기각이 작은 경우에는 조사면크기가 커짐에 따라 증가하다가 감소하였으며 최대값을 보이는 조사면크기는 쐐기각이 커짐에 반하여 감소하였으며 투과력에 관계없이 60。 쐐기에 대해서는 조사면 크기가 4 cm(A/P=1) 이상에서 조사면크기가 커짐에 따라 감소하였다. 6 MV 엑스선 에 대한 10 cm 깊이에서 15。 쐐기와 15 MV 엑스선에 대한 10 cm 깊이에서 45。 쐐기의 A/P 가 1.5보다 작은 조사면을 제외하고는 조사면의 크기가 커짐에 따라 %ROD는 감소하였다. $d_{max}$에서는 15。 쐐기와 30。 쐐기에 대해서는 %ROD가 음수였으며 절대값이 증가하였다. 이는 곧 조사면의 크기가 커짐에 따라 상부쐐기의 쐐기출력계수가 하부쐐기와 접근하고 드디어는 상부쐐기의 출력인수가 하부쐐기의 출력인수보다 작아질 수도 있다는 것을 의미하고 있다. 또한 %ROD 는 쐐기각이 클수록 변화가 컸으며, 조사면 크기가 커짐에 따라 10 cm 깊이에서보다 $d_{max}$에서 더 급하게 감소하였다. %ROD 는 6 MV 엑스선에 대해서는 -0.52～4.18 % 였고, 15 MV 엑스선에 대해서는 -0.44-4.18 % 였다. 결론 : 두 가지 투과력의 엑스선이 방출되는 선형가속기의 상하부 쐐기와 가상쐐기의 출력인수를 측정하여 비교하였다. 결과에서 얻어진 결론은 아래와 같다. 1. 조사면의 크기가 커짐에 따라 금속쐐기의 출력계수 는 증가하였으나 가상쐐기의 경우는 증가하다가 감소하거나 큰 쐐기각에 대해서는 감소만 하였다. 2. 상부쐐 기와 하부쐐기는 쐐기출력인수가 4% 이상 차이가 날 수 있으므로 독립적으로 측정하여 이용하여야 할 것이다.것이다.다.

• Radiation Oncology Journal
• /
• v.17 no.1
• /
• pp.78-83
• /
• 1999

Purpose : We have compared the characteristics of Siemens virtual wedge device with physical wedges for clinical application. Materials and Methods : We investigated the characteristics of virtual and physical wedges for various wedge angles (15, 30, 45, and 60$^{\circ}$) using 6- and 15MV photon beams. Wedge factors were measured in water using an ion chamber for various field sizes and depths. In case of virtual wedge device, as upper jaw moves during irradiation, wedge angles were estimated by accumulated doses. These measurements were performed at off-axis points perpendicular to the beam central axis in water for a 15cm${\times}$20cm radiation field size at the depth of loom. Surface doses without and with virtual or physical wedges were measured using a parallel plate ion chamber at surface. Field size was 15cm H20cm and a polystyrene phantom was used. Results : For various field sizes, virtual and physical wedge factors were changed by maximum 2.1% and 3.9%) , respectively. For various depths, virtual and physical wedge factors were changed by maximum 1.9% and 2.9%, respectively. No major difference was found between the virtual and physical wedge angles and the difference was within 0.5$^{\circ}$ . Suface dose with physical wedge was reduced by maximum 20% (x-ray beam :6 MV, wedge angle:45$^{\circ}$, 550: 80 cm) relative to one with virtual wedge or without wedge. Conclusions : Comparison of the characteristics of Siemens virtual wedge device with physical wedges was performed. Depth dependence of virtual wedge factor was smaller than that of physical wedge factor. Virtual and physical wedge factors were nearly independent of field sizes. The accuracy of virtual and physical wedge angles was excellent. Surface dose was found to be reduced using physical wedge.

• Progress in Medical Physics
• /
• v.15 no.4
• /
• pp.237-246
• /
• 2004

Even though the wedge factor was defined by ICRU, RTPS uses other definition different from the wedge factor to consider the wedge effect to correct dose. Because the factors with different concept are defined in a very different way, replacement of different factor could make severe error of dose and is unacceptable because their values are very different from each other. Radiotherapy machine installed in department includes physical wedges and function of dynamic wedge by upper jaws, and Eclipse and Pinnacle$^{3}$ such as RTPS are used. The wedge factors, relative wedge output factors and wedge field output factors of physical wedges and dynamic wedges were measured by an ionization chamber in water phantom. They are analyzed and compared in according to wedge position, field size, wedge angle, X-ray quality, measurement condition. Wedge factor, relative wedge output factors and wedge field output factors of dynamic wedges comparing physical wedges have an effect of several factors. Main factors effecting to the factors of dynamic wedges were field size and wedge angle. Beam quality of X-ray introduces a few effect to the factors. Because the factors related to wedge and defined with different concepts are different from each other, to reduce dose error it should be input by values proper to RTPS.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.78-80
• /
• 2004

본 연구에서는 쐐기형태의 선량분포를 구현할 수 있도록 고안된 미국 Varian사 동적쐐기(EDW ; Enhanced Dynamic Wedge)의 표면선량(surface dose)과 주변선량(peripheral dose) 특성을 분석하였다. 쐐기각도 15${\circ}$, 30${\circ}$, 45${\circ}$, 50${\circ}$를 대상으로 금속쐐기를 사용했을 경우와 동적쐐기를 사용했을 경우에 대해 해당 선량특성을 비교, 분석하였다. 표면선량 측정 결과, 동적쐐기가 금속쐐기보다 더 높은 선량 분포를 보였으며, 주변선량의 경우, 금속쐐기가 동적쐐기보다 더 높은 선량분포를 보였다. 이는 금속쐐기의 빔 필터링에 의한 빔 경화(hardening) 현상과 광자선과의 산란 현상에 기인한 결과로 방사선치료 계획 시 동적쐐기의 적용에 있어 고려해야 할 주요 특성이라 사료된다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.273-276
• /
• 2000

본 연구에서는 무반향 수조의 내벽 흡음 물질로 사용되는 무반향 타일을 쐐기형으로 제작하여 쐐기의 꼭지 각 변화에 따른 음향학적인 특성을 고찰하였다. 실험에서 사용된 쐐기형 무반향 타일의 크기는 $40{\cal}cm{\times}38.5{\cal}cm$ 이며, 타일을 구성하는 각 쐐기의 길이는 $2.75{\cal}cm$로 고정하고 각각 쐐기의 꼭지각이 $30^\circ$ 와 $60^\circ$ 인 타일을 제작하였다. 수중에서 쐐기가 없는 무반향 시료와 쐐기형 무반향 타일에 음파를 수직 입사하여 반사계수를 측정하였으며, 쐐기의 유무와 무반향 타일을 구성하는 쐐기의 꼭지각 변화에 따른 반사 및 흡음 특성을 고찰하였다. 음향특성 임피던스가 $2.14\times10^6$ Pa$\cdot$s/m인 쐐기형 무반향 타일을 25kHz 에서 100kHz의 주파수 영역의 음파를 입사했을 애 쐐기의 꼭지각이 $30^\circ$ 일 때 $60^\circ$보다 압력반사계수가 작고, 반사손실이 증가함을 알 수 있었으며, 그 결과로써 본 실험에서 사용된 $30^\circ$의 쐐기 꼭지각을 갖는 무반향 타일이 내벽 흡음 물질로서 성능이 더 좋다는 것을 확인하였다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.2
• /
• pp.77-82
• /
• 2007

Purpose: This study investigates peripheral dose from physical wedge and dynamic wedge system on a multileaf collimator (MLC) equipment linear accelerator. Materials and Methods: Measurments were performed using a 2D array ion chamber and solid water phantom for a 10$\times$10 cm, source-surface distance (SSD) 90 cm, 6 and 15 MV photon beam at depths of 0.5 cm, 5 cm through dmax. Measurments of peripheral dose at 0.5 cm and 5 cm depths were performed from 1 cm to 5 cm outside of fields for the dynamic wedge and physical wedge 15$^\circ$, 45$^\circ$. Dose profiles normalized to dose at the maximum depth. Results: At 6 MV photon beam, the average peripheral dose of dynamic wedge were lower by 1.4% and 0.1%. At 15 MV photon beam, the peripheral dose of dynamic wedge were lower by maximum 1.6%. Conclusion: This study showed that dynamic wedge can reduce scattered dose of clinical organ close to the field edge and reduced treatment time. The wedge systems produce significantly different peripheral dose that should be considered in properly choosing a wedge system for clinical use.

• Progress in Medical Physics
• /
• v.6 no.2
• /
• pp.29-34
• /
• 1995

The wedge factor is defined as a ratio of the absorbed dose in a phantom at a depth of reference point on the central axis with the wedge in the place to the absorbed dose at the same point with the wedge removed. We attempted to show the wedge factors dependence on the field sizes. The wedge factors were measured at various field sizes on 6MV and 15MV x-ray of Varian Clinac 1800 and 5MV x-ray of Philips SL75/5. The single wedge factor measured for a reference field size(10cmx10cm) may not be valid for all field sizes. For the thick wedge, especially an autowedge on Philips SL75/5 for maximum field size width 30cm. the error can be significant(6.6％). Therefore, in the presence of a wedge filter in the beam, a field size dependent wedge factor may be necessary in the treatment dose calculations.

• Radiation Oncology Journal
• /
• v.14 no.4
• /
• pp.323-332
• /
• 1996

Purpose : The wedge filter is the most commonly used beam modifying device during radiation therapy Recently dynamic wedge technique is available through the computer controlled asymmetric collimator, independent jaw. But dosimetric characteristics of dynamic wedge technique is not well known. Therefore we evaluate dosimetric characteristics of dynamic wedge compared to conventional fixed wedge. Materials and Methods : We evaluated dosimetric characteristics of dynamic wedge and fixed wedge by ion chamber, film dosimetry and TLD in phantoms such as water, polystyrene and average breast phantom. Six MV x-ray was used in $15{\times}15cm$ field with 15,30 and 45 degree wedge of dynamic/liked wedge system, Dosimeric characteristics are interpreted by Wellhofer Dosimetrie system WP700/WP700i and contralateral breast dose (CBD) with tangential technique was confirmed by TLD. Results : 1) Percent depth dose through the dynamic wedge technique in tissue equivalent phantom was similar to open field irradiation and there was no beam hardening effect compared to fixed wedge technique. 2) Isodose line composing wedge angle of dynamic wedge is more straight than hard wedge. And dynamic wedge technique was able to make any wedge angle on any depth and field size. 3) The contralateral breast dose in primary breast irradiation was reduced by dynamic wedge technique compared to fixed wedge. When the dynamic wedge technique was applied, the scatter dose was similar to that of open field irradiation. Conclusion : The dynamic wedge technique was superior to fixed wedge technique in dosimetric characteristics and may be more useful in the future.

• Progress in Medical Physics
• /
• v.16 no.2
• /
• pp.70-76
• /
• 2005

For clinical implementation of Enhanced Dynamic Wedge (EDW), it is necessary to adequately analyze and commission its dosimetric properties in comparison to common physical metal wedge (MTW). This study was implemented with the essential measurements of parameters for clinical application, such as percentage depth dose, peripheral dose, surface dose, effective wedge factor, and wedge profile. In addition, through the comparison study of EDW with open and MTW, the analysis was performed to characterize the EDW. We also compared EDW dose profiles of measured values using chamber array 24 (CA24) with calculated values using radiation treatment planning system. PDDs of EDW showed good agreements between $0.2\~0.5\%$ of open beam, but $2\%$ differences with MTW. In the result of the measurements of peripheral dose, it was shown that MTW was about $1\%$ higher than open field and EDW. The surface doses of $60^{\circ}$ MTW showed 10% lower than the others. We found that effective wedge factor of EDW had linear relationships according to Y jaw sizes and was independent of X jaw sizes and was independent of X jaw sizes and asymmetric Y jaw opening. In comparison with measured values and calculate values from Golden-STT based radiation treatment planning system (RTP system), it showed very good agreement within difference of $1\%$. It could be concluded that EDW is a very reliable and useful tool as a beam modification substitute for conventional MTW.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.10a
• /
• pp.14-18
• /
• 1996

쐐기각이 다른 4종류의 쐐기형 흡음타일을 설계,제작하고 각각의 흡음타일에 대한 음파 반사계수를 측정하였다. 흡음타일의 정면에서 측정한 반사계수는 실험한 4개의 타일중 쐐기의 꼭지각이 30$^{\circ}$일 때 최소값을 갖고 120$^{\circ}$ 일 때 최대값을 가졌다. 쐐기형 흡음타일의 꼭지각이 클수록 그 반사계수가 증가되는 것을 확인하였다. 또한 쐐기의 꼭지각이 같은 종류의 타일헤서는 본 실험에 사용한 10kHz~30kHz 입사음파의 주파수와 측정한 반사계수는 무관함을 보였다. 그리고 쐐기형 흡음타일 후면에서 측정한 반사계수는 타입에 관계없이 일정하게 나타났다.