• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.2
• /
• pp.34-43
• /
• 2018

DEM(Digital Elevation Model) being fundamental data in geospatial domain is produced from different data and using various methods. As they are derived their precision varies and altering derivative in application. In this work, we compare two widely used DEMs namely(Advanced Land Observing Satellite World 3D 30m and Shuttle Radar Topography Mission Global 30m) around coastal islands in Gyeongsangnam-do, South Korea. First statistics of each DEM were calculated and later overlapped in Landsat image for visual comparison of areas below and above zero-meter elevation. As a result, it was found that DEMs were highly correlated with each other and had similar statistics. Besides having few high differences in hilly land area, they were able to represent the coastal lines. It has also been noted that they have many negative values and should carefully select study area covering full watershed in coastal regions to avoid negative elevation even after filling the sinks.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.65-70
• /
• 2015

A study on thermal properties for a single-layer metal and two-layer composites was investigated for the heat-sink application. For the single-layer metal, an aluminum alloy (Al6061) was selected. A screen printed aluminum nitride (AlN) layer on the Al6061 substrate was chosen for the two-layer composites. The thermal conductivity of the sample was determined from the thermal diffusivity measured by the light flash analysis (LFA), specific heat and density. Measured thermal property values were compared to calculated values using the data from the references. The thermal conductivity of composites with screen printed AlN layer on the Al6061 substrate decreased linearly with increasing the thickness of AlN layer. Measured values of the thermal conductivity for composites with $53{\mu}m$ and $163{\mu}m$ thick AlN layers were $114.1W/m{\cdot}K$ and $72.3W/m{\cdot}K$, respectively. In particular, the thermal conductivity of the screen-printed AlN layer was demonstrated by appling the rule of mixture in view point of thermal resistivity. Measured values of the thermal conductivity for AlN layers with the thickness of $53{\mu}m$ and $163{\mu}m$ showed $9.35W/m{\cdot}K$ and $12.40W/m{\cdot}K$, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.12
• /
• pp.641-646
• /
• 2016

Soil organic matter (SOM) is an important soil component releasing nutrients to the plants and reducing risks of soil contamination to the human and ecosystem. Much attention has been recently paid to SOM investigation and management because SOM holds the most of carbon in the earth and sequestrate carbon as a sink tank. The first objective of the study was to investigate SOM of 495 soil samples taken at the Korea Soil Quality Monitoring Network. Soil samples were collected from 16 regions and 8 land use types. The second objective of the study was to find a relationship between the Tyurin method and loss-on-ignition (LOI) method for SOM. The means of SOM by Tyurin and LOI methods were 1.90 and 2.92 % (w/w), respectively. Land uses such as forest, religious area and park where organic matters continuously supply to normally showed higher SOMs than residential and school areas having sandy soils. A regression equation of the relationship between Tyurin and LOI methods was y(Tyurin) = 0.6257x(LOI) + 0.0602 (P-value < 0.001). The coefficient of determination was $R^2=0.749$, relatively linearly related. Although LOI may result in higher SOMs than the Tyurin method, LOI may be a preference for the SOM investigation if various kinds of land uses and many soil samples should be measured.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.7
• /
• pp.25-34
• /
• 2016

Recently, in Korea, problems related with unstability of slope or sinkhole in urban area due to erosion of compacted granite soil which was used as a backfill or embankment material have been treated as important issues. Small hole might develop inside of backfill area due to erosion of not only weathered granite soil but also clay, silt, fine sand size particles when underground water flows. Once erosion starts in a soil mass, erosion rate increases gradually to cause rapid destruction. In this study, a rotating cylinder test (RCT) was performed to evaluate the hydraulic resistance characteristics of compacted weathered granite soil under various relative densities and preconsolidation pressures. Meanwhile, an image analysis method was introduced to analyze radius of irregularly eroded sample. It was found that image analysis is an effective means of minimizing the error in calculating a critical shear stress and threshold shear stress on the irregularly eroded sample. Furthermore, in general, hydraulic resistance capacity increases with the increase of relative density and preconsolidation pressure.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.12
• /
• pp.43-52
• /
• 2013

Limestone typically forms large caverns such as reticular caverns or limestone caves, and also forms sinkhole and doline. These caverns cause different settlement when constructing roads, dams, etc. because the foundation cannot sustain the upper structures. So it is necessary to reinforce foundation such as cavern filling method, etc. In this study, ground reinforcement for structure foundation was carried out using CGS method in limestone cavity area and evaluation of reinforcement effect from engineering viewpoint was conducted through the field test. Among others, boring test was carried out to identify the ground structure and engineering characteristics. After CGS reinforcement, boring test was conducted for supplementary verification, and with reinforcement core taken during boring test, rock test was carried out to identify the physical properties of reinforcement material. After applying CGS method, rock test of the typical specimen, among reinforcement cores, taken from boring test was carried out and physical properties of the reinforcement was identified. As a result of compressive test of core sample, material inside the cavity was filled properly, indicating compressive strength of 12.2~19.2(MPa) which was evaluated acceptable. Thus the limestone cavity proved to have been reinforced successfully.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2018

We conducted research to develop a solidification agent for the ground surface reinforcement method in which activator is fused by recycling pig iron slag, which is a byproduct generated in the steel making process. The purpose of this research is to solve the problems of surface soil by improving the strength and durability of foundation soil such as soil loss, settlement, sinkhole, etc. by recycling pig iron slag from disused or landfilled steelworks. For this purpose, the possibility of using pig iron slag as a solidification soil was evaluated by the compressive strength, elution test of harmful materials, permeability coefficient test. As a result of the compressive strength test, the values of the strength of the curing 28 days of the solidified soil having the solidification agent mixing ratio of 12% were found to be 0.93, 0.96 and 1.3 MPa, respectively, satisfying the required strength value of 1 MPa, In the case of permeability coefficients, the minimum values were $4.1{\times}10^{-8}$, $7.0{\times}10^{-7}$, and $1.7{\times}10^{-7}cm/sec$, respectively, at the solidification agent mixing rate of 12%. In addition, as a result of the elution test of harmful materials, a small amount was detected in the item of hexavalent chromium but satisfied the inclusion criteria, and in the remaining items, heavy metals were not eluted.

• Journal of KIISE
• /
• v.42 no.10
• /
• pp.1268-1279
• /
• 2015

In order to manage a large number of devices connected to the Internet of Things (IoT), the Internet Engineering Task Force (IETF) proposed the IPv6 Routing Protocol for Low Power and Lossy Networks (RPL). The route of the RPL network is generated through the use of an Objective Function (OF) that is suitable for the service that is required for the IoT network. Since the route of the RPL network is conventionally simply chosen only by considering the link quality between the nodes, it is sensible to seek an OF that can also provide better Quality of Service (QoS). In previous studies, the end-to-end delay might possibly be sub-optimal because they only deal with problems related to the reduction of energy consumption and not to the link quality on the path to the sink node. In this study, we propose a scheme that reduces the end-to-end delay but also gives full consideration to both the quality on the entire route to the destination and to the expected lifetime of nodes with bottlenecks from heaped traffic. Weighting factors for the proposed scheme are chosen by experiments and the proposed scheme can reduce the end-to-end delay and the energy consumption of previous studies by 20.8% and 10.5%, respectively.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_1
• /
• pp.283-293
• /
• 2018

We applied PSInSAR to two SAR satellite (ALOS-1 and COSMO-SkyMed) images and analyzed the difference in displacement observation performance according to sensor characteristics. The building layer was extracted from the digital topographic map, and the PS extracted from the SAR image was classified into two groups(building structure and ground surface) for density analysis. The density of PS extracted from the research area was $0.023point/m^2$ for ALOS-1 PALSAR and $0.1point/m^2$ for COSMO-SkyMed, more than 4 times PS was extracted compared to ALOS-1. In addition, not only the PS density in the building, but also the density in the ground were greatly increased. The average displacement velocity of ALOS-1 PALSAR is within ${\pm}1cm/yr$, while for COSMO-SkyMed it is within ${\pm}0.3cm/yr$. Although it is difficult to make quantitative comparisons because it does not use the data for the same period, it can be said that the accuracy of X-band SAR system is very high compared to the L-band. In consideration of PS observation density and observation accuracy of displacement, X-band SAR data is very effective in research where it is important to acquire useful signals from the ground surface, such as ground subsidence and sinkhole.

• Cartoon and Animation Studies
• /
• s.12
• /
• pp.1-12
• /
• 2007

The long-term stagnation in the country involving missing it is starting from the late 1990s accumulated on the common vision. The government has, since 2002, cartoon comics industry nurture long-term industrial development of five-year plan, 346.7. During that period of unprecedented material support to the government's sweeping received. Upcoming in 2008 is the second long-term development plan will be effective. The temperature inside and outside the government, however, various tax and go to feel quite differently. The first plan is merely a period of enforced projects listed are only fit for Panathinaikos has endorsed this general trend, yirugo diagnosis. But fundamentally, the exact diagnosis is necessary for the long-term stagnation. Children's Learning Results cartoon wepmanhwawa not thrive households. Comics readers about the consumption pattern is changing. Therefore, long-term plan for the development of cartoon industry only a few government budget plan is not the government write 73 gala, companies and the private sector are coming together to plan and worry that the plan should be a comprehensive and bevels. In addition, through the selection and concentration to increase efficiency. You will probably need to strengthen the capabilities of our private organizations, it is a priority. Furthermore, the government's financial and policy support for the lobbying power also lead to an increase in betting. It features a think tank to study the policy framework for the establishment and promotion assume the ultimate proposal includes a cartoon film cozy confines of the legislation that parallels activities in the various proposals.

• Journal of Internet Computing and Services
• /
• v.12 no.3
• /
• pp.27-36
• /
• 2011

The sensor nodes of sensor network system are capable of wireless communication with sink nodes. They also acquire and transmit sensor data in broad region where people cannot access easily. However, the transmission of redundant data from sensor nodes reduces the lifetime of the entire system and substantial amount of resulted data needs to be resorted before implementing them to the specific applications. In this paper, the mobile agent middleware to eliminate the redundant sensor data is designed and implemented. In the proposed system, the mobile agent visits the destination sensor nodes according to the migration list offered by the meta table in the name space of the naming agent, eliminates the redundant sensor data corresponding to user condition, and acquires and transmits sensor data according to the purpose and needs. Thus, the excess transmission of the sensor data is avoided and the lifetime of the entire system can be extended. Moreover, the experiments using the mobile agent middleware with the conditions and limitations that are possible in real situation ore done to verify the successful elimination of the redundant sensor data and the efficiency of the data acquisition. Also, we show the potential applicability of the mobile agent middleware in various active sensor networks through the active rule based mobile agent middleware or the interaction with the active rule system.