• Journal of the Korean Institute of Gas
• /
• v.16 no.1
• /
• pp.15-21
• /
• 2012

An analysis was completed of the hazards distance of hydrogen accidents such as jet release, jet fire, and vapor cloud explosion(VCE) of hydrogen gas, and simplified equations have been proposed to predict the hazard distances to set up safety distance by the gas dispersion, fire, and explosion following hydrogen gas release. For a small release rate of hydrogen gas, such as from a pine-hole, the hazard distance from jet dispersion is longer than that from jet fire. The hazard distance is directly proportional to the pressure raised to a half power and to the diameter of hole and up to several tens meters. For a large release rate, such as from full bore rupture of a pipeline or a large hole of storage vessel, the hazard distance from a large jet fire is longer than that from unconfined vapor cloud explosion. The hazard distance from the fire may be up to several hundred meters. Hydrogen filling station in urban area is difficult to compliance with the safety distance criterion, if the accident scenario of large hydrogen gas release is basis for setting up the safety distance, which is minimum separation distance between the station and building. Therefore, the accident of large hydrogen gas release must be prevented by using safety devices and the safety distance may be set based on the small release rate of hydrogen gas. But if there are any possibility of large release, populated building, such as school, hospital etc, should be separated several hundred meters.

• 대한공업교육학회지
• /
• v.36 no.1
• /
• pp.95-114
• /
• 2011

The purpose of this study was to review and synthesize the papers in cooperation between industries and specialized high schools. We also try to provide explicit directions and suggestions for future researches. A total of 196 studies, including master's and doctoral theses up to 2010, were collected through RISS(Research Information Sharing Service), KISS(Koreanstudies Information Service System), and DBPIA(special database for domestic research information). The results were as follows. The number of papers has been increasing steadily. In the area of research, the field research was the most popular area. The most common type of the research was survey research and library research was followed. Similarly, questionnaire was the most popular method. Technical high schools were the most popular object of studies in specialized high schools. GyeongGi province was the most popular region of studies and Seoul was followed. The most common type of cooperation between industries and specialized high schools were actual training. The students in specialized high school was the most popular object of surveys, and teachers and industry people were followed.

• Journal of Distribution Research
• /
• v.16 no.5
• /
• pp.211-231
• /
• 2011

RYUTSUKEIRETSUKA(Vertical Marketing System) developed by the Japanese Leading Manufacturers began to turn weak with the presence of the large- scaled retail enterprises since 1980’s. Therefore the alliances between major manufacturers & large distributors that were in the conflict relations for a long time began to progress. In accordance with this change in the distribution channel practice, the stance of the distribution channel theory in Japan had also changed. As the normative researcher group who had been critical to RYUTSUKEIRETSUKA and sympathetic to the task of merchant judged that it would disappear sooner or later, they considered positively the alliances between major manufacturers & large distributors which the latter were in dominant position. On the other hand, even the empirical researchers who supported the affirmative function of RYUTSUKEIRETSUKA changed their standpoint. They recognized the new channel practice, in other words the vertical alliances between the power companies, would be the frontier of research in accordance with the impetus of positivism in terms of the Marketing methodology. Thus, researchers of distribution channel theory in Japan who supported the normative approach become few and even changed to hurry to absorb in the empirical research, while moving the main focus of the research from RYUTSUKEIRETSUKA to the Alliances. In the long run, the distribution channel theory which was regarded as the leading principle of the Japanese Marketing has just made the methodological paradigm shift. The author suggests a critical viewpoint against the current Japan’s academism with the assumption that RYUTSUKEIRETSUKA has negative aspects.

• Journal of Distribution Science
• /
• v.7 no.1
• /
• pp.5-34
• /
• 2009

This article describes a business case of ROSEWeb, a floral distribution service by internet of Newrun System Company. Newrun System is one of the floral distribution IT solution company. The purpose of this case study is to find out which factors of ROSEWeb solution of successful business model and internet distribution strategy that plays an important role as the floral distribution IT service. ROSEWeb has experienced many challenging obstacles while they prepare for this floral distribution IT service. This case study has found that Newrun System Company execute the rapidly transformation of business model to cope with changing situation. Specially, so far, ROSEWeb continuously keep on competitive advantage as floral distribution IT service through building core competence. this study shows that ROSEWeb's case broadly apply reference model to the building business model and formulating floral distribution service strategy and other internet business models. Finally, we intends to discuss about theses questions. the question is "by the existing state of entering Internet portal(Yahoo, Naver, Daum), Can ROSEWeb have sustainable competitive advantage in floral distribution service?", and "what is Newrun System's next business model?". Through the intensive interviews with people involved in the development of ROSEWeb, this article provides important implications to the business community who is preparing for new applications for mobile internet.

• Journal of the Korean Arthroscopy Society
• /
• v.11 no.1
• /
• pp.13-19
• /
• 2007

Purpose: We investigated the natural history of acute, isolated posterior cruciate ligament injuries treated conservatively. Materials and Methods: Between February 1999 and October 2006, we evaluated retrospectively the results of acute, isolated posterior cruciate ligament injuries treated conservatively. The subjects consisted of 21 patients. At initial and follow up visits physical examination, $KT-2000^{TM}$ arthrometer and MRI were performed to assess improvement on the knee stability and continuity of the posterior cruciate ligament. IKDC (International Knee Documentation Committee) knee scoring and quadriceps muscle strength were also checked in all population. Comparing the results of initial and follow up examinations we assessed the natural history of acute, isolated posterior cruciate ligament injuries treated conservatively. The mean follow up period was 22.7 months. Results: The posterior drawer test showed 14 cases of Grade I, 6 cases of Grade II and 1 case of Grade III progressing 18 cases of Grade I and 3 cases of Grade II. The mean difference of 5.7mm by $KT-2000^{TM}$ arthrometer was changed Into 2.7mm and the continuity of posterior cruciate ligament initially checked by 48.1% on MRI increased to 69.7%. The mean quadriceps muscle strength was grade 'Good' and mean IKDC knee score was nearly grade 'A'. Conclusion: Our study suggests that patients with acute, isolated posterior cruciate ligament injuries treated conservatively may get good clinical outcomes on clinical situation and MRI.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.454-454
• /
• 2011

녹색성장은 최근 세계적인 이슈가 되고 있다. 세계물위원회(World Water Council, WWC)의 경우 2012년 마르세유에서 개최되는 제6차 세계물포럼(World Water Forum, WWF)에서 물문제 해결을 위한 신개념 패러다임으로서 '녹색성장(Green Growth)'을 채택하기 위한 협력방안의 필요성을 제안하고 있다. 우리나라에서는 이미 녹색성장을 국가 슬로건으로 선정하고 글로벌 녹색성장연구소(Global Green Growth, GGGI)를 설립하는 등 녹색성장을 선도하고 있다. 이는 물의 중요성에 비추어볼 때 녹색성장을 물 분야에 확산시킬 수 있는 적절한 기회로 보인다. 녹색성장은 물 관련 환경서비스가 환경오염 없는 경제성장을 이룩하는 데 주요한 역할을 수행할 수 있다는 가능성과 당위성에서 파생된 최근에 만들어진 개념으로서, 물 분야의 경우 녹색경제에 있어서 중요한 역할을 수행해왔으며 이후 지속적인 인구증가, 물 소비패턴의 변화, 에너지비용 증가, 기후 변화 등으로 물 분야의 중요성은 더욱 커질 것으로 기대된다. 이처럼 물 관리는 경제발전, 재해로부터 보호, 인간의 건강 및 생태계와 삶의 질을 위하여 필수적이기에 녹색성장에 있어 중요한 역할을 수행하고 있다. 하지만 올바른 물 관리가 녹색성장에 기여할 수 있는 방법에 대해서는 아직 명확화 구체화되지 못하고 있는 실정이다. 이에 따라 녹색성장을 새로운 국가 성장 동력의 패러다임으로 구축하기 위해 수자원분야에서의 녹색성장방법론을 정립하고, 선진국과 개도국 정부들의 균형 있는 참여를 통한 글로벌 파트너십 구축이 요구되고 있으며, 이를 세계물위원회 등 국제기구와 공동으로 연계시킨다면 상당한 시너지 효과가 기대된다. 물관리는 국가의 경제발전, 재해로부터 생명과 재산의 보호, 인간의 건강 및 생태계 다양성 및 건전성 유지와 삶의 질을 향상을 위하여 매우 중요하며, 환경보존과 경제성장을 동시에 추구하는 녹색성장을 실현하는 데 있어서도 가장 핵심적인 사항이라고 할 수 있다. 그러나 올바른 물 관리가 녹색성장에 기여할 수 있는 방법에 대해서는 아직 명확하고 구체화 되지 못하고 있는 실정이다. 따라서 본 연구에서는 '물과 녹색성장'의 이론적 배경, 필요성, 개념정립, 벤치마킹 사례, 국제사회에서의 녹색성장과 관련한 논의 기구 및 흐름 등의 이해를 기초로 녹색성장을 통한 경제성장의 상호작용과 선순환구조를 체계화시키기 위한 균형방안을 제시하고자 한다. 또한 수자원 및 하천관리 분야에서의 WGG구현을 위한 정책제안 및 실행방안이 담긴 중장기 로드맵을 구축하여 물을 통한 성장의 발판을 마련하고자 한다.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.110-120
• /
• 2014

In this study, Chwibyeong studied only in the literature on the basis of the composition method through the book, Imwonkyungjeji. I tried to represent through the installation of facilities and planting of trees. I have obtained the following results. First, we presented the basic direction of Chwibyeong represented by analyzing the composition methods in the literature. Second, represented the Chwibyeong based on the results of the analysis of the literature. I was and comparative analysis of the content analysis literature the specificity of the method of manufacturing facilities and growth characteristics of trees that have been displayed during the represent process. Third, we derive how to manage trees that are grasped through the Chwibyeong represent process, how to manage the facility, such as the installation method. Currently, Chwibyeong is restored in the front of Changdeokgung Juhapru pavilion, but showing the appearance different from the appearance of Chwibyeong shown in the literature. Therefore, after the 18th century, prototype representation of Chwibyeong is intended to be able to find the traditional and the uniqueness. It has been used as an element of the garden of Korea, and intended to be an important role to find the flavor of the Korean garden.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.4
• /
• pp.37-49
• /
• 2014

This paper aims to interpret the transformation process of town plan of Gosan-up(高山), which was provincial administrative focus town in Josun dynasty, basing on morphological viewpoint. Morphological concepts, such as morphological frame, urban plan, kernel, colonization, route system, fixation line, fringe belt, plan unit & plan division, morphological period derived from the study of Conzen, M.R.G. and Caniggia, G. epidome district, break point, broken plot, urban fallow, privatization are adopted for the interpretation of urban form. Morphological period of Gosan can be divided in four ; formation of kernel & morphological structure, disintegration & redevelopment of the kernel, augmentative development of the kernel & formation of modern epidome district, outwards expanding of urbanized area, transition & reorganization of epidome district. Especially public leading projects such as construction of new regional connection road and public facilities such as myeon(township) office, agricultural cooperatives federation office, market, are main factors of morphological transformation of townplan. In the early stage, under the Japanese imperialism, construction of the new matrix route(Gosan-ro) through the kernel and followed planned routes gave way to disintegrating traditional areal plan unit and forming small block plan units in administrative facilities area. And linear plan units with commercial buildings were formed along the new matrix route and planned route adjacent to periodical market. In the latter stage, with development of public facilities, private sectors' large circulation institution and terminal outside the kernel with planned routes formed areal block based plan units with commercial and public buildings. And part of the spatial area with the linear plan unit were turned into urban fallow. With the transformation of town plan, new roads outside the kernel have substituted for traditional fixation line of waterway with road and topographical feature. Fringe belts were made successively along the new road and around the major intersections outside of existing urbanized area. Land use in fringe belts, constituting of outer locational tendency early on formation, was gradually replaced with commercial & business buildings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.610-619
• /
• 2016

Digital manufacturing (DM) technology helps engineers design products promptly and reliably at low production cost by simulating a manufacturing process and the material behavior of a product in use, based on three-dimensional digital modeling. The computing infrastructure for digital manufacturing, however, is usually expensive and, at present, the number of professional design engineers who can take advantage of this technology to a product design accurately is insufficient, particularly in small and medium manufacturing companies. Considering this, the Korea Institute of Science and Technology Information (KISTI) and H University is operating a DM track in the form of Industry-University-Research Institute collaboration to train high-performance-computing-based DM professionals. In this paper, a series of courses to train students to work directly into DM practice in industry after graduation is reported. The operating cases of the DM track for two years since 2013 are presented by focusing on the progress in establishment, lecture and practice contents, evaluation of students, and course quality improvement. Overall, the track management, curriculum management, learning achievement of students have been successful. By expediting more active participation of the students in the track and providing more internship and job offers in the participating companies in addition to collaborative capstone design projects, the track can be expanded by fostering a nationwide training network.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.200-211
• /
• 2019

This study analyzed the factors related to the job satisfaction and turnover rate of students in the skin care contract department, and suggested ways to enhance long-term employee retention. Frequency analysis and multiple regression analysis were performed using the SPSS statistical program and based on the survey data of 260 skin care contract students. The main results were as follows. First, contract students had high job satisfaction because of sufficient in-service training during the internship and also received the authority to perform the job duties of their positions. Second, the regular technical education for the job of contract students gave them confidence in job performance and job confidence, which led to long-term employee retention. Third, contractual students' turnover was reduced by applying compensation such as incentives, awards, and promotion opportunities in accordance with their work performance. Therefore, the results of the study suggest that compensation based on job performance, and the confidence in job performance of skin care contract students, can lead to increased job satisfaction, a reduced turnover rate and better long-term employee retention.