• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.293-296
• /
• 2004

초고압 케이블의 절연물질로 널리 사용되고 있는 가교 폴리에틸렌의 전기적 특성은 라멜라 결정 조직의 밀도와 라멜라 조직의 성장방향과 밀접한 관련이 있는 것으로 알려지고 있다. 본 연구에서는 반도전 물질에 2종의 첨가제를 이용하여 처방한 3종의 반도전 컴파운드에 대하여 시편 제작 조건에 따른 미세 조직을 제어하여 폴리에틸렌의 미세 조직을 변화시킴으로써, 라멜라 조직이 전기적 특성에 미치는 영향을 분석하였다. 전기적 특성은 AC 절연파괴 전압을 측정하였으며, 미세 조직 변화를 조사하기 위하여 TEM 이미지 분석 통하여 라멜라 밀도를 통계적으로 정성 분석하여 상관관계를 규명하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.260-263
• /
• 2004

During the last few years, there have been many efforts on the fabrication of electronic and optical devices based on semiconductor nanowires. Room-temperature ultraviolet lasing in GaN nanowire, ultraviolet light sensing in ZnO nanowire, and dramatically improved hall mobility in Si nanowire have been demonstrated in this article. The studies on semiconductor nanowire based electronic and optical device is reviewed.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.905-906
• /
• 2008

This paper presents a method where the best focues points are calculated using line fitting. Two datasets are selected for each pixel based on the maximum value which is calculated using Laplacian operator. Then linear regression model is used to find lines that approximate these datasets. The best fit lines are found using least squares method. After approximating the two lines, their intersection point is calculated and weights are assigned to calculate the new value for the depth map.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.907-908
• /
• 2008

Estimation of surface roughness is an important quality measure for many applications including optics, polymers, semiconductor etc. In this paper, we propose to estimate surface roughness using image focus. We use polymers as test objects. The proposed method is an inexpensive and fast method based on Shape From Focus (SFF). We show that the results from SFF are encouraging for comparison of polymers using surface roughness.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.11
• /
• pp.1481-1487
• /
• 2002

The thin SiC filament technique has been employed to identify the possibility of measuring flame temperature, and especially unstable near-extinction flame temperature in an oxidizer deficient ambience, by comparing the relative visible (non-IR) luminosities of SiC filaments with thermocouple measured temperature in co-flowing, laminar propane/air diffusion flames. The results show good agreement between the digitized relative visible luminosity profiles of the SiC filaments and temperature profiles measured using a thermocouple at temperatures above $700^{\circ}C$, although, a non-linear calibration is probably required far the whole temperature range. The highest radial peak temperature exists near to the nozzle exit. and the centerline temperatures were virtually unchanged with increasing flame height in an oxidizer deficient near-extinction flame.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.1
• /
• pp.26-31
• /
• 2002

In this study an experimental investigation was conducted to find the grinding characteristics of ceramics, STD11 and STS304 materials. The grinding force and the microscopic observation of the workpieces were obtained in surface grinding. Grinding characteristics of ceramics were inspected through the microscopic examination the cutting force, and the surface roughness. It has been found that the finding force of ceramics is relatively low as compared to that of steels and that CBN wheel has an excellent performance. The surface roughness was measured according to the feedrate and the depth of out.

• Journal of Power System Engineering
• /
• v.5 no.2
• /
• pp.43-49
• /
• 2001

For machining auto-mobile cam, the developed biarcs-fitting method eliminates the ridge problems in conventional straight-line fitting approximation or single-arc fitting of curve tool path where it leaves ridges of tool marks on the machined surface of the workpiece. The powerful advantage of this biarc method is demonstrated by applying it to the numerically controlled machining of a curved cam profile, also verified by using a CNC simulating program for auto-mobile cam profile. As a result, this algorithm may be used in CNC milling and turning for cam profile machining with short block line.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.12
• /
• pp.1635-1643
• /
• 1995

This paper proposes an algorithm for machine recognition of phonemes in continuously spoken Korean. The proposed algorithm is a static strategy neural network. The algorithm uses, at the stage of training neurons, features such as the rate of zero crossing, short-term energy, and either PARCOR or auditory-like perceptual linear prediction(PLP) but not both, covering a time of 171ms long. Numerical results show that the algorithm with PLP achieves approximately the frame-based phoneme recognition rate of 99% for small vocabulary recognition experiments. Based on this it is concluded that the proposed algorithm with PLP analysis is effective in phoneme recognition.

• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.281-288
• /
• 2011

Hydraulic hose assemblies deliver a fluid power in various oil pressure equipments such as construction machinery, automobile, aircraft, industrial machinery, machine tools, and machinery for ships, or they are used as pipes in oil pressure circuit. However, as the traditional measure for estimating life under the influence of various external factors incurs hardship in terms of time and expenses, it is essential to take accelerated life test by choosing the factor that suits the usage condition of the test object. The objective of the this study is to propose a acceleration model that takes both temperature and pressure without flexing condition into consideration. The life that is calculated by the equation for evaluating life and the test data show similar slopes as a result of comparing and analyzing the equation for evaluating life that is obtained in this research and the test data, which illustrates that they estimate life similarly, and the proposed equation is proved to be an accelerated life equation that presents the test results.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.366-373
• /
• 2000

This paper represents the results carried out to determine the dynamic response characteristics of Korea High Speed Rail(KHSR) bridges. The responses of the KHSR bridges subjected to the moving train loading are obtained through the simplified method for the 2-dimensional train/track/bridge interaction analysis in which the eccentricity of axle loads and the effect of the torsional forces acting on the bridge are included for the more accurate train/track/bridge interaction analysis. The results of the analyses are compared with the field test data to verify the performance of the 2-dimensional train/track/bridge interaction analysis method.