• Phonetics and Speech Sciences
• /
• v.1 no.2
• /
• pp.15-22
• /
• 2009

Prominence of speech, which is often called 'accent,' affects the fluency of speaking American English greatly. In this paper, we present an accurate prominence detection method that can be utilized in computer-aided language learning (CALL) systems. We employed pitch movement, overall syllable energy, 300-2200 Hz band energy, syllable duration, and spectral and temporal correlation as features to model the prominence of speech. After the features for vowel syllables of speech were extracted, prominent syllables were classified by SVM (Support Vector Machine). To further improve accuracy, the differences in characteristics of neighboring syllables were added as additional features. We also applied a speech recognizer to extract more precise syllable boundaries. The performance of our prominence detector was measured based on the Intonational Variation in English (IViE) speech corpus. We obtained 84.9% accuracy which is about 10% higher than previous research.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.21 no.2
• /
• pp.71-79
• /
• 2008

Objectives : The relativity of food allergy to infant atopic dermatitis and the effect of dietary treatment were studied. Methods : Many kinds of medical thesis and books about food allergy and infant atopic dermatitis were surveyed. Results and Conclusion : In this study, we found that food allergen is concerned in infant atopic dermatitis. So the proper dietary treatment can not only improve the symptoms of atopic dermatitis but also prevent atopic dermatitis itself, especially to infants, But before taking dietary treatment, patients' balance of growth and development should be considered, Because they are in the growth period.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.6
• /
• pp.481-486
• /
• 2001

ZnO thin films on glass substrate were depostied by RF magnetron reactive sputter with various argon/oxygen gas ratios and substrate temperatures. Crystallinities, surface morphologies, chemical compositions, and electrical properties of the films were investigated by XRD, SEM, XPS and electrometer(keithley 617). All films showed a strong preferred orientation along the c-axis on glass substrate, and the chemical stoichiometry was obtained at Ar/O$_2$.=50/50. The propagation velocity of ZnO SAW filter was about 2,590 m/sec and insertion loss was a minimum value of abut -21dB.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.410-413
• /
• 2004

In this paper, a simulator system for Fuel Cell Hybrid Electric Vehicles(FCHEV) is implemented using DSP boards with CAN bus. The subsystems of a FCHEV i.e., the fuel cell system, the battery system, the vehicle dynamics with the transmission mechanism are coded into 3 DSP boards. The power distribution control algorithm and battery SOC control are also coded into a DSP board. The real-time monitoring program is also developed to examine the control performance of power control and SOC control algorithms.

• Journal of Korean Society for Quality Management
• /
• v.31 no.1
• /
• pp.132-141
• /
• 2003

As the technology has improved and demands of customers have varied, a lot of products are getting diverse and intricate. Consequently, the enterprise that produce products have to simultaneously consider the various variables for the very products. There are some scheme, such as Multivariate control chart and Demerit control chart, designed to simultaneously monitor the variables in the process. In this paper, we present an effective method for process control using the Demerit-CUSUM control chart in the process where nonconforming units or nonconformities are occured by various types. In addition, we show interpretation method for abnormal signal in order to quickly detect the assignable causes as Demerit-CUSUM control chart signals abnormality. we compare performance of Demerit control chart and Demerit-CUSUM control chart using example again used in the existing studies, and present result of performance accoriding to changing sample size and parameter.

• Annual Conference on Human and Language Technology
• /
• 1989.10a
• /
• pp.92-95
• /
• 1989

단어 인지과정은 언어 이해과정의 한 부분으로, 신속성과 정확성 그리고 심성어휘집을 그 특정으로 한다. 표기 단어의 인지과정에는 그 언어의 정서법 체계가 반영된다. 한국어의 단어 인지과정에 대한 모델 작성의 예비 연구로 음운적 처리와 어휘 근접에서의 정서법적 정보의 역활에 대해 검토하였다. 어휘 근접의 단위에 대한 논의에서는 음절, 자질, 단어등의 형식적 언어학적 단위외에 심리적 단위가 고려되어야 함이 지적되었으며, 그 심리적 단위들과 정서법의 관계에 대해 논의하였다. 마지막으로 한글 단어 인지과정에 관한 한 모델로서 상호작용 활성화 모델의 가능성에 주목하였다.

• KSBB Journal
• /
• v.14 no.1
• /
• pp.71-75
• /
• 1999

A highly effective phosphorus accumulating bacterium named Acinetobacter CW3 was isolated from the nature by using Winogradsky columns. The optimal cultivation conditions of Acinetobacter CW3 in shaking flask were determined as $20^{\circ}C$, pH 7, 200rpm, 18.5mg $PO_4$-P/L. Acientobacter CW3 could remove phosphorus completely in 12hours for a batch culture at optimal cultivation condition. This bacterium could uptake phosphorus on aerobic condition and release it on anaerobic condition.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.1 no.1
• /
• pp.123-132
• /
• 2002

In this study, the static and dynamic characteristics of endmilling process was modelled and the analytic realization of chatter mechanism was discussed. In this regard, We have discussed on the comparative assessment of recursive time series modeling algorithms that can represent the machining process and detect the abnormal machining behaviors in precision endmilling operation. In this study, simulation and experimental work were performed to show the malfunctional behaviors. For this purpose, new recursive least square method (RLSM) were adopted for the on-line system identification and monitoring of a machining process, we can apply these new algorithms in real process for detection of abnormal chatter. Also, The stability lobe of chatter was analysed by varying parameter of cutting dynamices in regenerative chatter mechanics.

• Journal of Power System Engineering
• /
• v.2 no.2
• /
• pp.41-46
• /
• 1998

This paper presents the vibration control for the two degree-of-freedom which is a reduced model of multi-layer structure. This reduced model is designed for the first and second order resonance in the low frequency domain where the disturbance such as the earth quake has the large energy. And a designed controller using the LQ type $H_{\infty}$ control theory shows the good performance for the impulse disturbance through the experimental results and the simulation results respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1257-1260
• /
• 2005

Grinding process has unique characteristics compared with other machining processes. The cutting edges of the grinding wheel don't have uniformity and act differently on the workpiece at each grinding. The response surface analysis is one of various methods for optimizing and evaluating the process parameters to achieve the desired output. In this study, the effect of the grinding parameters on outcomes of the surface grinding was analyzed experimently. To predict the grinding outcomes and to select the grinding conditions before grinding, the second-order response surface models for the grinding force and the surface roughness were developed.