• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.1
• /
• pp.37-47
• /
• 1993

최근에 치명적인 바이러스, 특히 에이즈를 이르키는 Human Immunodificiency Virus (HIV), 또는 간에 심각한 병을 이르키는 Hepatitis B Virus (HBV)와 같은 무서운 바이러스가 환자의 피나 분비물을 통하여 의사에게 전염되는 사례가 늘어감에 따라 이제는 환자의 피나 분비물의 침투를 막기 위해 방수성과 방균성을 가진 수술복 착용이 절대적으로 필요하게 되었다. 따라서 본 연구의 목적은 1. 수술가운을 만드는 5가지 대표적인 직물의 방수성과 방균성을 측정하고 2. 세탁시 표백제의 사용유무가 그 직물의 방수성과 방균성에 미치는 영향을 알아보고 3. 반복세탁이 그 직물의 방수성과 방균성에 미치는 영향을 알아 보는데 있다. 이 실험을 위해 3가지 재사용 수술가운과 (Gore-tex$^R$, membrane reinforced; Compel$^{TM}$, fabric reinforced; Acep$^{TM}$, non-reinforced) 두 가지 일회용 가운 (Evolution$^R$ gown, fabric reinforced; Evolution$^R$ Specialty, film reinforced)이 사용되었다. 표백제를 사용한 세탁이 직물의 방수성과 방균성에 미치는 영향을 알아보기 위해 재사용 가운을 세탁, 건조, 살균을 하였다. 세탁과 살균의 빈도수는 1, 20, 40, 50, 60, 70, 80번 이였다. 방수성 측정방법으로 1. Impact Penetration test (AATCC 42-1985), 2. Elbow Lean test, 3. Synthetic Blood Resistance test (ASTM F 23. 40. 01)가 사용되었고 방균성 측정방법으로 Viral Resistance test (ASTM F 23. 40. 02)가 사용되었다. 실험 결과는 다음과 같다. 1. Gore-Tex$^R$ 가운과 Evolution$^R$ Specialty 가운은 방수성과 방균성의 성질을 가졌다. 그러나 표백제를 사용하여 70번 세탁한 Gore-Tex$^R$ 가운은 membrane의 구조가 파괴되어서 방균성을 상실했다. 2. Evolution$^R$ 가운, Acep$^{TM}$ 가운과 Compel$^{TM}$ 가운은 오직 Impact Penetration test만 통과했다. 즉 이 직물들은 큰 압력의 가함이 없는 splash resistance만 가지고있다. 그러나 Acep$^{TM}$ 가운과 Compel$^{TM}$ 가운은 20번과 60번 세탁 후 각각 그들의 splash resistance 마져도 상실했다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.490-497
• /
• 2016

This study compared and analyzed the pollution levels of radiation shielding aprons and ways to sterilize them using 30 lead aprons. After collecting samples from the center of the lead apron, where contact is most frequent, experiments were conducted employing Coagula and Latex methods. Using the culture medium where bacteria grew, measurements of the pathogen count and identification were performed. The greatest number of pathogens were $7.16{\pm}10$, which were detected on the lead apron from general X-ray room #2, but there was no significant difference according to the facilities (p > 0.05). Compared to how many pathogens remained between using the disinfectant ethanol and tissue, the pathogens decreased by $0.01{\pm}0.4$ (p < 0.05) after using disinfectant ethanol and by $0.87{\pm}1.7$(p < 0.05) after using disinfectant tissue. The Pearson correlation test revealed a significant correlation (-0.296, p < 0.05) between them. According to this research, there were pathogens on the lead aprons and the number of pathogens was determined by statistical analysis. It is expected that the rate of radiology technologists, patients, and medical equipment infected by pathogens will be reduced by the proper use of sterilization with a disinfectant ethanol.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.1
• /
• pp.172-181
• /
• 2004

The purpose of this study was to develop functional lab gowns in the view of safety and work efficiency. As the first step of this study, we surveyed on satisfaction rates, preferences and inconvenience items in regard of lab gowns. The data was obtained from 138 graduate students specialized in science and 113 medical students. Respondents answered that the first purpose of wearing lab gown was to protect body from danger. Wearing frequency followed with ‘always’, ‘as possible as’, and then ‘sometimes’. Forty-five percentage of respondents answered that they didn't wear lab gowns often in summer because of hot weather. The contaminated or damaged parts of lab gowns followed with cuffs, abdomen, thigh, lower part, and then chest. Washing frequency followed with ‘once a month’, ‘once per six months’, and then ‘more than once a week’ There were significant differences in normal wearing frequency, wearing frequency by season and washing frequency due to major. There were no significant difference by sex and major in all questions. In regard of the protective capacity of current lab gowns, most respondents answered that ‘It's normal’(60%), ‘It's enough’(21%), so that they didn't show much dissatisfaction. Forty-three percentage of respondents were not satisfied with cuffs. Respondents answered that the cuffs were in danger and inconvenient because of broad cuffs. In regard of color, preference for white were high and followed with ivory, light sky, light green. and then light pink. Materials of current lab gowns were cotton/polyester or polyester 100%. Sixty-eight percentage of respondents were satisfied with that and others were not. The reasons for dissatisfactions were as follows; those materials were not protective to chemicals thoroughly enough. Cotton/polyester materials were heavy. Wearing sensation of polyester 100% was not good.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.2
• /
• pp.292-302
• /
• 2004

The purpose of this study was to evaluate thermal properties of lab gowns developed from the point of safety and work efficiency. We evaluated thermal and subjective responses of subjects wearing functional new lab gowns (Type B, C, D) and a popular lab gown on the market (Type A). Type B was a new lab gown made of woven fabric with functional cuffs. Type C was a new apron made of woven fabric with arm protectors. Type D was a new lab gown made of non-woven material with functional cuffs and openings around the armpits. Temperature in the climatic chamber was set at 19$^{\circ}$C as an indoor temperature in winter and at 24$^{\circ}$C in summer. There were no significant differences in rectal temperature and heart rate among four types of gowns and between two air temperatures for 120 min. Mean skin temperature was much higher in the type A and B than in He type C and D (p .05). In the 19$^{\circ}$C air, clothing microclimate temperature on the back was the highest in the type B and was the lowest in the type C (p .05). Clothing microclimate humidity was not significant differences among gowns. In subjective .esponses, subjects perceived that Type B was the warmest gown in the 19$^{\circ}$C and the hottest and more humid in the 24$^{\circ}$C than other gowns. Inversely, type C was the coolest gown among four gowns. Both in the 19$^{\circ}$C and in the 24$^{\circ}$C, the Type D had gained most responses of being comfortable. In conclusion, the temperature difference of 5$^{\circ}$C was more of an influencing factor than the difference from four types of lab gowns. Secondly, we recommend the manufacturers to make lab gowns with functional cuffs for safety purposes. Thirdly, the spread of the type of apron with arm protector will contribute to increase of the frequency of wearing in summer. Fourthly, it is necessary to study continuously about lab gowns with non-woven materials for researchers exposed to toxic chemical and biological materials.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.411-416
• /
• 2003

다목적 대형 댐의 건설로 수몰된 과거의 삶의 공간을 20년이 지나서 다시 복원한다는 것은 그곳에 살던 실향민 등에게는 참으로 반가운 소식이다. 본 연구에서는 1980년대 초에 완공된 충주댐으로 인하여 물 속에 잠긴 청풍 지구를 수몰이전의 입체 지형 공간적으로 원형복원하기 위한 원격탐사 기법을 적용한 것이다. 비교적 해상도가 좋은 인공위성 사진자료와 원격탐지된 디지털 영상자료를 수집하고, 수몰직전에 제작된 지형도를 이용하여 위성영상자료의 통합 적용하여 수몰이전의 지형공간정보를 현재시간으로 영상 복원하는 실험을 한 것이다. 이를 위하여 지형도에서 추출한 등고선과 현재의 등고선과의 접목을 통하여 청풍 주변지역을 중심으로 당시의 수치표고모형을 생성하였다. 또한 이를 입체적으로 보여주기 위한 투시조감도를 각 방향에서 생성함으로서 수몰이전의 아름다운 모습을 3차원적으로 영상복원 하였다. 좀더 가깝게 수몰마을을 보기 위한 최근접 시뮬레이션 동영상을 제작하여 과거 기억 속의 고향을 찾아볼 수 있도록 한 것이다.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.28-33
• /
• 2017

In this paper, new signal model for bio-signal detection, i.e heart beat and respiration, using CW radar. Most research on this similar topic are based on the conventional signal model which is not correct in envisaging reflected signal from the human body. The system developed based on this conventional model can not predict exact performance of the system. So in this paper modified signal model for bio-radar is proposed and then simulation for detecting heartbeat and respiration signal in AWGN, multipath environment. The detection performance difference between two signal models are discussed.the modified

• Applied Microscopy
• /
• v.38 no.2
• /
• pp.89-96
• /
• 2008

Dolomedes spiders of the family Pisauridae are one of free wandering spiders with semi-aquatic habitation. They do not build web for prey-hunting but build a nursery web for spiderlings. This paper describes the fine structure of the silkspinning spigots of the fishing spider Dolomedes sulfureus revealed by the field emission scanning electron microscope (FESEM). The fishing spider Dolomedes sulfureus possesses only three types of silk glands which connected through the typical spinning tubes on the spinnerets. The silk spigots of this spider were identified as three groups: ampullates, pyriforms and aciniforms. Two pairs of major ampullate glands send secretory ductules to the anterior spinnerets, and another two pairs (or $1{\sim}2$ pairs in males) of minor ampullate glands supply the middle spinnerets. In addition, the pyriform glands feed silk into the anterior spinnerets ($62{\sim}68$ pairs in females and $45{\sim}50$ pairs in males), and the aciniforms send ductules to the middle ($33{\sim}40$ pairs in females and $18{\sim}25$ pairs in males) and the posterior spinnerets ($42{\sim}50$ pairs in females and $24{\sim}28$ pairs in males). Among these, the ampullate one is the most predominate gland in both sexes.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.307-312
• /
• 2015

ARPA(Automatic Radar Plotting Aid) is a device to calculate CPA(closest point of approach)/TCPA(time of CPA), true course and speed of targets by vector operation of relative courses and speeds. The purpose of this study is to develop target acquisition and tracking technology for ARPA Radar implementation. After examining the previous studies, applicable algorithms and technologies were developed to be combined and basic ARPA functions were developed as a result. As for main research contents, the sequential image processing technology such as combination of grayscale conversion, gaussian smoothing, binary image conversion and labeling was deviced to achieve a proper target acquisition, and the NNS(Nearest Neighbor Search) algorithm was appllied to identify which target came from the previous image and finally Kalman Filter was used to calculate true course and speed of targets as an analysis of target behavior. Also all technologies stated above were implemented as a SW program and installed onboard, and verified the basic ARPA functions to be operable in practical use through onboard test.

• Science of Emotion and Sensibility
• /
• v.20 no.4
• /
• pp.1-14
• /
• 2017

The purpose of this study was to investigate the neural substrates for recognizing facial expressions among alcoholics by using functional magnetic resonance imaging (fMRI). Abstinent inpatient alcoholics (n=18 males) and demographically similar social drinkers (n=16 males) participated in the study. The participants viewed pictures from the Japanese Female Facial Expression Database (JAFFE) and evaluated intensity of facial expressions. the alcoholics had a reduced activation in the limbic areas including amygdala and hippocampus while recognizing the emotional facial expressions compared to the nonalcoholic controls. On the other hand, the alcoholics showed greater brain activations than the controls in the left lingual (BA 19)/fusiform gyrus, the left middle frontal gyrus (BA 8/9/46), and the right superior parietal lobule (BA 7) during the viewing of emotional faces. In sum, specific brain regions were identified that are associated with recognition of facial expressions among alcoholics. The implication of the present study could be used in developing intervention for alcoholism.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.1
• /
• pp.21-27
• /
• 2004

It will be a real good news fer the people who were lost their hometown by the construction of a large dam to be restored to the farmer state. Focused on Cheung-pyung around where most part were submerged by the Chungju large Dam founded in eurly 1980s, It used remote sensing image restoration Technique in this study in order to restore topographical features before the flood with stereo effects. We gathered comparatively good satellite photos and remotely sensed digital images, then its made a new fusion image from these various satellite images and the topographical map which had been made before the water filled by the DAM. This task was putting together two kinds of different timed images. And then, we generated DEM including the outskirts of that area as matching current contour lines with the map. That could be a perfect 3D image of test areas around before when it had been water filled by making perspective images from all directions included north, south, east and west, fer showing there in 3 dimensions. Also, for close range visiting made of flying simulation can bring to experience their real space at that time. As a result of this experimental task, it made of new fusion images and 3-D perspective images and simulation live images by remotely sensed photos and images, old paper maps about vanished submerged Dam areas and gained of possibility 3-D terrain image restoration about submerged area by large Dam construction.