• Journal of the Korean earth science society
• /
• v.21 no.1
• /
• pp.59-66
• /
• 2000

In Kyeongsang basin, there were very dynamic magmatic activities, resulting to form volcanic and plutonic rocks. A plutonic recycle appeared in this region. Presumption of the pressure for hornblende-bearing granitic rock among the plutonic rocks, can support important informations for the emplacement depth of Cretaceous Bulgugsa granites in Kyeongsang basin. $Al^T$(Al total) contents of hornblende is related to the pressure, oxygen fugacity, and compositions of other minerals having the solid solution. So we apply the $Al^T$ content of hornblende to several empirical and experimental geobarometer systems to presume the pressure and to determine the emplacement depth of Cretaceous Bulgugsa granites in Kyeongsang basin from the inferred pressure. With the result that we applied the $Al^T$ contents of hornblende to the various geobarometers, there was a positive relationship between the pressure and $Al^T$. The minimum pressure value ranges from 0.73 to 1.70kbar in Kyeongju and the maximum value from 2.02 to 3.16kbar in Kimhae. And then the tectonic setting in Kyeongsang basin has no relation to the emplacement depth of Cretaceous granites and means variations with the movement of vertical component in each area. As we suppose that the density of earth's crust is $2.8g/cm^3$, the average values of the emplacement depth ranges in each area range from 2.6 to 11.4km. These data confirm the previous idea about the emplacement depth of Cretaceous granites in Kyeongsang basin, and these geobarometers using the $Al^T$ contents of hornblende is available though they have much limits. Therefore Cretaceous Bulgugsa granites in Kyeongsang basin was the shallow depth intrusive rut and the exposed granites was the shallow depth crust.

• Journal of Mushroom
• /
• v.8 no.3
• /
• pp.131-136
• /
• 2010

This study was performed to determine the optimal concentration of carbon dioxide, which effects mushroom growth and yield. It was shown that the periods for fruiting initiation, growth and harvest of Flammulina velutipes were increased when the $CO_2$ concentration was raised. In general, those characteristics were less affected in brown strains than in white ones. Especially brown strain ASI4103 was susceptible to changes in $CO_2$ concentration. Yields per bottle and individual mushroom weight also decreased in most strains when $CO_2$ levels increased. We were unable to designate any tendency in the number of fruiting bodies due to the large variation within each respective strain. Finally, water contents in the fruiting bodies were found to decline under high $CO_2$ concentrations.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.04a
• /
• pp.265-274
• /
• 1993

정보화 사회에서 대량으로 생산된 데이타 코드들은 일관된 설계 원칙없이 필요할 때마다 만들어 사용함으로써 정보의 중복 저장 및 정보교환에 있어서의 변환 작업등으로 인한 경비의 소요가 상당한 실정이다. 이러한 문제점에 대한 해결책으로 본 논문에서는 데이타코드 설계자가 일관성있게 데이타코드를 생성할 수 있도록 도와주는 데이타 코드 생성 지원 전문가 시스템의 설계에 관하여 연구하였다. 불완전 영역 설계를 위한 지식 획득과 표현에 적합한 전문가 시스템 쉘인 GUESS(Guideline Underlying Expert system Shell)를 설계하였다. GUESS는 전문가 시스템을 설계 지원 도구로 사용하는 사용자에게 기존에 작성된 적절한 설계 용례를 선택의 기준으로 제공하며, 유연성 있는 작업 지침들을 규칙으로 포함하고 있다. GUESS는 Prolog언어를 기반으로 한 추론기관과 설계지침을 포함하는 정적지식, 외부 데이타베이스를 연결한 동적 정보, 설계 세부방법을 담고 있는 부가도구들로 구성된다. GUESS/DCG는 데이타 코드 생성을 지원하기 위하여 데이타 코드의 유형과 선택기준 및 설계원리를 정적지식으로 가지며, 이를 경험적으로 탐색하는 추론 기관 및 사용자인 데이타 코드 설계자와 적절한 대화식 접근을 가능하게 하는 설명부분과 대화 인터페이스를 GUESS를 바탕으로 구현한 것이다. 특히 동적 정보의 적절한 이용과 데이타 코드의 통합된 저장, 일관성 있는 운영을 보장하기 위하여 개발중인 데이타 코드 관리시스템과의 인터페이스 부분을 추가하여 기존에 운영되고 있는 데이타 코드의 참고와 호환성, 확장성을 유지하였다. 이 시스템은 데이타 코드 관리시스템에 일관된 생성 수단을 제공하는것 외에도, 각 기관에서 대량으로 작성되는 데이타 코드를 유지, 보수하는 작업에도 큰 기여를 할 것이다.지의 선택작업이 행해지는 경우에 촛점을 맞추었다. 그리하여 다작업장의 휴리스틱에 의거한 작업순서 결정을 위해 우선 BB의 상한을 구하는 연구를 행했다. 이를 위해 우선 단일작업장에서 야기될 수 있는 모든 상황을 고려한 최적 작업순서 결정규칙을 연구했으며, 이의 증명을 위해 이 규칙에 의거했을 때의 보완작업량이 최소가 된다는 것을 밝혔다. 보완작업 계산의 효율성을 제고하기 위해 과부하(violation)개념을 도입하였으며, 작업유형이 증가된 상황에서도 과부하 개념이 보완작업량을 충분히 반영할 수 있음을 밝혔다. 본 연구에서 제시한 최적 작업순서 규칙에 의거했을 때 야기될 수 있는 여러가지 경우의 과부하를 모두 계산했다. 앞에서 개발된 단일작업량의 최적 작업순서 결정규칙을 이용하여 다작업장의 문제를 실험했다. 이 문제는 규모가 매우 크므로 Branch & Bound를 이용하였으며, 각 가지에서 과부하량이 최적인 경우만을 고려하는 휴리스틱을 택하여 실험자료를 이용하여 여러 회 반복실험을 행했다. 그리고 본 연구의 성과를 측정하기 위해 휴리스틱 기법시 소요되는 평균 CPU time 범위에서, 랜덤 작업순서에 따른 작업할당을 반복실험하여 이중 가장 좋은 해와 비교했다. 그러나 앞으로 다작업장 문제를 다룰 때, 각 작업장 작업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야 할 것이다.로 이루어 져야 할 것이다.태를 보다 효율적으로 증진시킬 수 있는 대안이 마련되어져야 한다고 사료된다.$\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도

• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.237-245
• /
• 2010

Recently, deflection of the slab during construction periods becoming one of the important issues because of increasing the large-span structures. Early removing the form and support of the slab to achieve the rapid construction cause falling-off in quality of the structures. To reduce these deterioration and make rapid construction, construction of strength and stiffness gain model is needed by the research about the early-age concrete properties. Previous research results indicated that concrete model in existing design codes could not provide the mechanical properties of early age concrete. This paper carried out the concrete compressive strength tests on the curing age at early age stage. Evaluation of the accuracy of compressive strength and modulus of elasticity gain formula in existing various design codes was performed based on this test results, and new design model was proposed. This new model will be useful to develop the new rapid construction methods or prevent the deterioration of the deflection at construction periods. Material tests were performed at 1, 3, 7, 14, 28 curing days, total 159 cylinder style specimens were tested. Based on analyzing the test results, the relationship between compressive strength and modulus of elasticity at early age was proposed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.5
• /
• pp.295-305
• /
• 2010

Although the rubble mound breakwaters in Korea have been damaged by typhoons almost every year, quantification of erosion of armor block have seldomly been made. In this paper, the damage of armor units is standardized by the relative damage. In the case where the number of damaged units is reported, it is divided by the total number of units to calculate the relative damage. In the case where the rehabilitation cost is reported, the relative damage is calculated by using its relationship with the present value of the past rehabilitation cost. The relative damage is shown to have strong correlations with the typhoon parameters such as nearest central air pressure and maximum wind speed at each site. On the other hand, the existing numerical methods for calculating the cumulative damage are compared with hydraulic model tests. The method of Melby and Kobayashi (1998) is shown to give a reasonable result, and it is used to calculate the relative damage, which is compared with the measured damage. A good agreement is shown for the East Breakwater of Yeosu Harbor, while poor agreement is shown for other breakwaters. The poor agreement may be because waves of larger height than the design height occurred due to strong typhoons associated with climate change so that the relative damage increased during the last several decades.

• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.200-204
• /
• 1980

A series of tests ware conducted to find out whether continuous heat bleaching of the refined Malaysian plam oil stored in different conditions could reduce color of the finished oil in an actual plant situation. When the refined oil was stored in a stainless steel tank and was not abused by heat during 5 month storage period, heat bleaching followed by clay bleaching and deodorization resulted in a substantial reduction in color of the finished oil in comparison to conventional process (clay bleaching of the refined oil followed by deodorization) (2.6 vs 1.3 red in Lovibond color). However, when the refined oil was stored in a carbon steel tank and was highly abused by heat in the presence of iron picked up from the tank (6.53 ppm) during the same storage period, heat bleaching followed by clay bleaching and deodorization did not help reduce color of the finished oil in comparison to the conventional process (2.7 vs 2.8 red in Lovibond color). It was also shown that oxidation values were not good indices for heat bleachability. Heat bleaching caused slight increase in polymer content of the oil. However, trans isomers were not increased when the oil was heat bleached.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.135-146
• /
• 2011

Steel structures have been generally painted to prevent corrosion damage. However, the painted film is deteriorated with increase in service life, and then corrosion damage resulting in cross sectional area occurs on steel surface. As a result, the buckling strength of steel structures can be decreased due to the corrosion damages. The evaluation method of the axial buckling strength of columns about a variety of section shapes and supporting conditions have been presented, but evaluation method of buckling strength about irregular nonprismatic columns is not established. In this study, the axial buckling strength of corroded steels was evaluated based on the buckling test results of corroded steel specimens that were cut off at a temporary steel structure. The corroded specimens were picked up total 10 specimens according to various slenderness ratio from the web of a temporary structure's main beam. The length of specimens is 200, 300, 400, 500 and 600mm respectively. The rust productions were removed by the chemical treatment. Then, the surface geometry was measured at intervals of $1{\times}1mm$ by using the optical 3D digitizing system, and the residual thickness of the specimens was calculated. The axial buckling test was performed on 10 corroded specimens and 12 non-corroded specimens under the fixed-fixed support condition. From the test results, the effect of corrosion damages on axial buckling load was investigated. Regardless of corrosion damage degree, the axial buckling strength of corroded specimens and non-corroded specimens was evaluated identically by using minimum average residual thickness or average residual thickness to minus its standard deviation. Reasonable measuring intervals of residual thickness was proposed by using the results to apply for practical works.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.4 s.46
• /
• pp.277-288
• /
• 2005

Perlite, a hydrated volcanic glass, occurs mainly as a bed-like body, and is distributed intermittently along the unconformity surface between the Beomgockri Group and its lower formations, viz. Janggi Group. The perlite is intimately associated with surrounding pumiceous welded tuff and rhyodacites in space and time. Compared to the typical perlite, the perlite is rather silica-poor and impure, and thus, includes lots of phenocrysts and rock fragments. Nearly the perlite is compositionally rather close to a pitchstone than a perlite in water contents. Petrographic comparison between perlite and associated volcanic to volcaniclastic rocks indicates that pumiceous welded tuff and rhyodacite seem to be Protolith of the Perlite. A Zr/$TiO_{2}$-Nb/Y diagram and field occurrence of perlite and their protolithic rocks also conforms the above interpretation. Kn addition, remnant vesicles in perlite strongly reflect that the precursor of perlitic glass appeared to be pumice fragment as well as volcanic glass. The perlite was diagenetically formed by way of a pervasive water-rock interaction at the deposition of the Manghaesan Formation in lacustrine environment. During perlitization, $SiO_{2}$ and alkali tend to be consistently depleted. Preexisting system of the Beomgockri Group based on the perlite formation should be corrected, because the perlite was formed diagenetically without lateral persistence in its occurrence.

• Restorative Dentistry and Endodontics
• /
• v.34 no.5
• /
• pp.424-429
• /
• 2009

This study aimed to assess the influence of different cross-sectional area on the cyclic fatigue fracture of Ni-Ti rotary files using a fatigue tester incorporating cyclical axial movement. Six brands of Ni-Ti rotary files (ISO 30 size with. 04 taper) of 10 each were tested: Alpha system (KOMET), HeroShaper (MicroMega), K3 (SybronEndo), Mtwo (VDW), NRT (Mani), and ProFile (Dentsply). A fatigue-tester (Denbotix) was designed to allow cyclic tension and compressive stress on the tip of the instrument. Each file was mounted on a torque controlled motor (Aseptico) using a 1:20 reduction contra-angle and was rotated at 300 rpm with a continuous, 6 mm axial oscillating motion inside an artificial steel canal. The canal had a $60^{\circ}$ angle and a 5 mm radius of curvature. Instrument fracture was visually detected and the time until fracture was recorded by a digital stop watch. The data were analyzed statistically. Fractographic analysis of all fractured surfaces was performed to determine the fracture modes using a scanning electron microscope. Cross-sectional area at 3 mm from the tip of 3 unused Ni-Ti instruments for each group was calculated using Image-Pro Plus (Imagej 1.34n, NIH). Results showed that NRT and ProFile had significantly longer time to fracture compared to the other groups (p < .05). The cross-sectional area was not significantly associated with fatigue resistance. Fractographycally, all fractured surfaces demonstrated a combination of ductile and brittle fracture. In conclusion, there was no significant relationship between fatigue resistance and the cross-sectional area of Ni-Ti instruments under experimental conditions.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.172.2-173
• /
• 2003

단백질, 탄수화물, 유지 등과 같은 생고분자를 소재로하여 제조하는 가식성 또는 생분해성 필름은 식품표면을 코팅하거나, 식품의 내부에 사용하여 식품을 외부의 충격으로부터 보호하고 식품의 저장수명을 증가시키는 동시에 수분, 기체 및 용질의 이동을 방지하는 기능을 한다. 이러한 가식성 필름의 소재 중 하나인 전분은 비교적 저가의 재료이고 기체투과를 방지하는 성질은 우수하지만, 탄력성이 적은 단점을 가지고 있다. 생고분자필름의 물리적 강도를 증진시키고 수증기의 투과성을 낮추는 방법으로 단백질과 탄수화물을 복합적으로 사용한다 본 실험에서는 분리 대두 단백질(SPI)과 옥수수 전분을 혼합하여 가식성의 생분해성 필름을 제조하고 이들의 이화학적 특성에 대해 연구하였다. SPI 필름은 SPI 5g에 증류수 100$m\ell$을 가해 glycerol 2g을 첨가해 제조하였으며, 옥수수 전분필름은 옥수수 전분 6g에 증류수 100$m\ell$을 가해 glycerol 1.2g을 첨가해 제조하였다. SPI와 옥수수 전분의 혼합필름은 SPI와 옥수수 전분의 양을 1：1 비율로 혼합하여 제조하였다. SPI 필름, 옥수수 전분 및 SPI와 옥수수 전분 용액의 혼합필름의 각각의 수증기 투과도는 7.49$\times$$10^{-11}$, 2.69$\times$$10^{-11}$, 4.24$\times$$10^{-11}$ g.m/m$^2$.s.Pa이었다. 본 실험으로 SPI의 단일재료로만 필름을 제조하였을 때보다 SPI 용액에 옥수수 전분용액을 혼합해 필름을 제조하면 탄력성을 유지하면서 수증기 투과도를 낮출 수 있다는 결과를 얻을 수 있었다.현미밥의 유리아미노산 분석 결과 필수아미노산을 포함한 다량의 아미노산이 존재하였으며 혈압강하 기능성 성분인 GABA(${\gamma}$ -amino butyric acid) 함량은 현미가 4.7 mg/100 g, 발아현미 20.8 mg/100 g이었으며, 동결건조 후 분석한 발아현미밥의 GABA 함량은 5.7 mg/100 g이었다. 발아현미밥의 관능검사 결과는 색, 윤기, 맛, 부착성, 응집성, 탄력성이 A가 유의적으로 높았으며, 외관의 경우도 A가 더 높은 평가를 받았다. 또한 전반적으로 A가 B에 비해 유의적인 차이를 나타내진 않았지만 더 나은 선호도를 나타내었다.좋게 평가되었다.＊값은 63-68사이로, a＊값은 0.13에서 -0.89사이를 b＊값은 2-5값 사이에서 변화하여 제조한 죽의 색이 옅은 황색임을 알 수 있었다. 고형분 함량, 퍼짐성과 pH에 대한 $R^2$은 각각 0.4280, 0.5433과 0.2406임을 볼 때 버섯, 당근, 대파의 비율에 따라 제조한 쇠고기 야채 쌀죽의 고형분 함량, 퍼짐성과 pH는 설정된 범위내에서 그 유의성이 인정되지 않아 큰 영향을 미치지 않음을 알 수 있었다. 관능검사 결과, 색과 향에 대한 반응표면 회귀식의 $R^2$은 각각0.6000과 0.7825이고 P-value는 각각 0.4290과 0.0942로서 5% 수준에서 유의한 상관성이 없음을 확인할 수 있었다. 맛과 점성에 대한 $R^2$은 0.8717과 0.8068이고 P-value는 각각 0.0195 (p ＜0.05)와 0.0612로서 야채의 배합비에 따라 맛에 있어서 유의확률 5%수준에서 그 유의성이 인정되었으며, 전체적인 기호도에 대한 유의성은 $R^2$이 0.8463이고 P-value는 0.034