• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.2
• /
• pp.377-384
• /
• 2022

Vortex-induced vibration (VIV) occurs owing to the vortex generated from the back side of the appendages of ships and submarines during operation. Recently, the importance of high-order modes (HOMs) vibration and fatigue failure has become increasingly emphasized by increasing the speed of ships and the size of structures. In addition, predicting the vibration of HOMs is significantly necessary as the VIV becomes stronger in the fast flow speed condition than in the low flow speed condition. This study introduces a methodology according to HOMs hybrid Fluid Structure Interaction (FSI) for predicting the HOMs VIV on the hydrofoils. The HOMs FSI system is verified by comparing the VIV results from the FSI simulation with the experimental results. Finally, the effectiveness of the HOMs FSI is determined by applying the maximum von-Mises stress obtained from the VIV on the hydrofoil to the S-N curve released from Det Norske Veritas (DNV). VIV results from the HOMs FSI include the lock-in characteristics as well as a significant increase of more than 10 times compared with that of low-order modes (LOMs) FSI. In the future works, advanced studies will be required for improving cantilever boundary conditions and the shape of hydrofoils.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.45-52
• /
• 2000

We present a novel method for simple and efficient analysis of the rectangular MQW waveguide. Preferentially two-dimensional structure is transformed into one-dimensional structure by using the effective index method. Then, the characteristic matrix of the resultant planar MQW waveguide is analyzed by scanning angle method. The effective index, modal intensity, and optical confinement factor of rectangular MQW waveguide can be effectively obtained by this method. Our simulation results show excellent agreement with the accurate solutions based on the finite element method. We also introduce the approximation methods for the analysis of rectangular MQW waveguide and investigate their validity. By using perturbation approach, modal power loss of guided wave in rectangular MQW waveguide is newly investigated and compared with the conventional method using the approximation of planar MQW waveguide.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.485-493
• /
• 2010

GFRP rebar with ribs resemble those of deformed steel rebar was developed in 2005. It was reported that ribs of the GFRP rebar were sheared off due to the lower shear strength of polymer. In this study, the basic development length of the GFRP rebar was investigated through pull-out tests, models specified in ACI440.1R-03 and -06, and empirical model derived by Cosenza et al. (2002). As a results of pull-out tests, the critical embeddment length, which is defined as the length when failure mode is changed from pull-out to bar fracture, was 20 times of bar diameter for GFRP rebar and was 15 times for steel rebar. It is believed that the basic development of the GFRP rebar is 21 times of bar diameter, which is determined from the application of average bond strength into the model equation specified in ACI440.1R-03. Compared to the model equation in ACI440.1R-06, that in ACI440.1R-03 is recommendable for design purpose. The Cosenza et al.'s model underestimates the basic development length of the GFRP rebar.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.91-95
• /
• 1992

현재 대부분의 공작기계에서는 모터의 동력을 주축으로 전달하기 위해서 커플링, 밸트,기어 등을 사용하고 있지 만 주축이 고속회전할 수록 커플링 구동방법에서는 주축과 모터의 미스얼라인먼트에 의한 진동과 소음이 커지고 벨트 구동방법에서는 원심력에 의한 벨트 장력의 증가 및 벨트의 파손현상, 벨트와 풀리간의 미끄럼현상 등이 발생하며, 기거 구동방법에서는 기어간의 금속접촉에 의한 진동과 소음이 증대하게 된다. 본 연구에서는 모터내장형 주축의 동특성을 체계적으로 해석하기 위해서 유한요소모델을 도입하였다. 특히 공작기계 주축은 세장비가 비교적 작기 때문에 Timoshenko보 이론으로 모델화하였고, 여러장의 얇은 철심용 강판들도 적층된 내장형 모터의 회전부(rotor)는 굽힘변형 및 전단변형에 대해서 상당 수준의 강성효과를 나타내기 때문에 질량효과 외에도 그 강성효과를 수학적 모델에서 고려하였다, 또한 진동실험 결과로 부터 모터회전부의 강성특성을 규명하는 방법을 제시하였으며, 제안된 규명방법의 유용성은 모터내장형 주축에 대한 모드매개변수의 이론값과 실험값을 비교함으로써 입증하였다.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.2
• /
• pp.347-354
• /
• 2008

Steel plate-concrete (SC) structure has recently been used in nuclear power structure because of its construction efficiency. In this study, experimental and analytical study to investigate the behavior of the SC structure's wall slab connection was carried out. Experiments were performed for typical SC and RC connections in order to examine the basic difference between each structure. Finite element analysis was performed and the result of the analysis was found to closely reflect the experimental result. By varying the thickness of the shear plate and friction coefficients and the distance of applied load from the wall, the influence of the parameters on the joint strength and failure modes were examined. Finally, it was confirmed that the joint strength formula proposed in th this research gives conservative results.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.511-520
• /
• 2007

There is a concern with worldwide deterioration of highway bridges, particularly reinforced concrete. The advantages of fibre reinforced plastic(FRP) composites over conventional materials motivate their use in highway bridges for replacement of structures. Recently, an FRP deck has been installed on a state highway, located in New York State, as an experimental project. In this paper, a systematic approach for analysis of this FRP deck bridge is presented. Multi-step linear numerical analyses have been performed using the finite element method to study the structural behavior and the possible failure mechanism of the FRP deck-superstructure system. Deck's self-weight and ply orientations at the interface between steel girders and FRP deck are considered in this study. From this research, the results of the numerical analyses were corroborated with field test results. Analytical results reveal several potential failure mechanism for the FRP deck and truss bridge system. The results presented in this study may be used to propose engineering design guideline for new and replacement FRP bridge deck structure.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.1
• /
• pp.121-130
• /
• 2011

Space frame structures have the advantage of constructing a large space structures without column and it may be considered as a shell structure. Nevertheless, with the characteristics of thin and long term of spacing, the unstable problem of space structure could not be set up clearly, and there is a huge difference between theory and experiment. Therefore, in this work, the tangential stiffness matrix of space frame structures is studied to solve the instability problem, and the nonlinear incremental analysis of the structures considering rise-span ratio(${\mu}$) and the ratio of load($R_L$) is performed for searching unstable points. Basing on the results of the example, global buckling can be happened by low rise-span ratio(${\mu}$), nodal buckling can be occurred by high rise-span ratio(${\mu}$). And in case of multi node space structure applying the ratio of load($R_L$), the nodal buckling phenomenon occur at low the ratio of load($R_L$), the global buckling occur a1 high the ratio of load($R_L$). In case of the global buckling, the load of bifurcation is about from 50% to 70% of perfect one's snap-through load.

• Composites Research
• /
• v.30 no.2
• /
• pp.149-157
• /
• 2017

In this paper, fracture behavior of laminated composites with notch was studied by cohesive zone modeling approach. The numerical modeling proceeded by first generating 3 dimensional solid element meshes for notched laminated composite coupon configurations. Then cohesive elements representing failure modes of fiber fracture, matrix cracking and delamination were inserted between bulk elements in all regions where the corresponding failures were likely to occur. Next, progressive failure analyses were performed simulating uniaxial tensile tests. The numerical results were compared to those by experiment available in the literature for verification of the analysis approach. Finally, notched laminated composite configurations with selected stacking sequences were analyzed and the failure behavior was carefully examined focusing on the failure initiation and progression and the dominating failure modes.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.165-166
• /
• 2015

본 논문은 새로운 단일전력변환 SEPIC(Single-Ended Primary-Inductor Converter)-ZETA 절연형 양방향 컨버터를 제안한다. 제안된 컨버터는 SEPIC과 ZETA 컨버터가 결합된 구조로 절연을 통해 안정성을 강화했고, DC측 리플 전류가 낮아 에너지 저장장치의 수명을 연장시킨다. 그리고 SEPIC 컨버터 모드(DC/AC)와 ZETA 컨버터 모드(AC/DC)에서의 입출력 전압비가 동일해 양방향 제어 알고리즘이 간단하다. 또한, 기존 two-stage 구성의 양방향 컨버터와 달리 회로가 단순하며, 단일전력변환을 통한 고효율 저비용의 장점을 가지고 있다. 본 논문에서는 이론적 해석 및 제안한 컨버터의 250W급 시작품을 이용한 실험결과를 통해 컨버터의 우수성 및 성능을 검증한다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.3
• /
• pp.55-62
• /
• 2000

This paper presents an analysis of the chaotic behavior in the discrete-time voltage mode chaotic generator fabricated using 0.8${\mu}{\textrm}{m}$ single poly CMOS technology. An approximated empirical equation is extracted from the measurement data of a nonlinear function block. Then the bifurcation diagram is simulated according to input variables and Lyapunov exponent λ which represent a dependence on an initial value is calculated. We show the interrelations among time waveforms, state transition, and power spectra for the state condition of chaotic circuit, such as equilibrium, periodic, and chaotic state. And results of experiments in the chaotic circuit with the $\pm$2.5V power supply and sampling clock frequency of 10KHz are shown and compared with the simulated results.