• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.53.2-53.2
• /
• 2010

지금까지 능동 구동 디스플레이의 TFT backplane에 사용하고 있는 채널 물질로는 수소화된 비정질 실리콘(a-Si:H)과 저온 폴리실리콘(low temperature poly-Si)이 대표적이다. 수소화된 비정질 실리콘은 TFT-LCD 제조에 주로 사용되는 물질로 제조 공정이 비교적 간단하고 안정적이며, 생산 비용이 낮고, 소자 간 특성이 균일하여 대면적 디스플레이 제조에 유리하다. 그러나 a-Si:H TFT의 이동도(mobility)가 1 cm2/Vs이하로 낮아 Full HD 이상의 대화면, 고해상도, 고속 동작을 요구하는 UD(ultra definition)급 디스플레이를 개발하는데 있어 한계 상황에 다다르고 있다. 또한 광 누설 전류(photo leakage current)의 발생을 억제하기 위해서 화소의 개구율(aperture ratio)을 감소시켜야하므로 패널의 투과율이 저하되고, 게이트 전극에 지속적으로 바이어스를 인가 시 TFT의 문턱전압(threshold voltage)이 열화되는 문제점을 가지고 있다. 문제점을 극복하기 위한 대안으로 근래 투명 산화물 반도체(transparent oxide semiconductor)가 많은 관심을 얻고 있다. 투명 산화물 반도체는 3 eV 이상의 높은 밴드갭(band-gap)을 가지고 있어 광 흡수도가 낮아 투명하고, 광 누설 전류의 영향이 작아 화소 설계시 유리하다. 최근 다양한 조성의 산화물 반도체들이 TFT 채널 층으로의 적용을 목적으로 활발하게 연구되고 있으며 ZnO, SnO2, In2O3, IGO(indium-gallium oxide), a-ZTO(amorphous zinc-tin-oxide), a-IZO (amorphous indium-zinc oxide), a-IGZO(amorphous indium-galliumzinc oxide) 등이 그 예이다. 이들은 상온 또는 $200^{\circ}C$ 이하의 낮은 온도에서 PLD(pulsed laser deposition)나 스퍼터링(sputtering)과 같은 물리적 기상 증착법(physical vapor deposition)으로 손쉽게 증착이 가능하다. 특히 이중에서도 a-IGZO는 비정질임에도 불구하고 이동도가 $10\;cm2/V{\cdot}s$ 정도로 a-Si:H에 비해 월등히 높은 이동도를 나타낸다. 이와 같이 a-IGZO는 비정질이 가지는 균일한 특성과 양호한 이동도로 인하여 대화면, 고속, 고화질의 평판 디스플레이용 TFT 제작에 적합하고, 뿐만 아니라 공정 온도가 낮은 장점으로 인해 플렉시블 디스플레이(flexible display)의 backplane 소재로서도 연구되고 있다. 본 실험에서는 rf sputtering을 이용하여 증착한 a-IGZO 박막에 대하여 열처리 조건 변화에 따른 a-IGZO 박막들의 광학적, 전기적 특성변화를 살펴보았고, 이와 더불어 a-IGZO 박막을 TFT에 적용하여 소자의 특성을 분석함으로써, 열처리에 따른 Transfer Curve에서의 우리가 요구하는 Threshold Voltage(Vth)의 변화를 관찰하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.23-30
• /
• 2016

In this study, the heat transfer and pressure drop characteristics were evaluated for multi-tube $CO_2$ water heaters with lengths of 4.5 m and 7.5 m. The evaluation was done using the -NTU method, and the results were compared with experimental data. Water flows through the shell side of the water heater, while $CO_2$ flows through 8 inner tubes. The heater uses a counter-current design to maximize the heat transfer efficiency. The energy balance equation describing the flows of $CO_2$ and water for each node is set up using the section-by-section method. The calculated heat transfer rates agree well with the experimental data within ${\pm}5%$ error. The outlet water temperature decreased linearly with the increase of the water flow rate. The calculated heat transfer rates agreed well with the experimental data within ${\pm}3%$ error. The results show that the heat transfer rate increases almost linearly with the increase of water flow rate or $CO_2$ inlet temperature in both the 4.5-m and 7.5-m water heaters, whereas the water outlet temperature linearly decreases with the increase of the water flow rate. The comparison of the $CO_2$ pressure drop between the calculation and experiment results shows good agreement at the high $CO_2$ flow rate within 5 % error, but the value is about 20 % higher in the experimental pressure drop at the low $CO_2$ flow rate.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.3
• /
• pp.247-256
• /
• 1994

This experiment was carried out to determine harvesting date and cultivar effects on growth characteristics, forage yield and quality of spring sown oats(Avena surivu L.) at the forage experimental field, College of Agricultural and Life Sciences, Swul National University, Suwwn from March 22 to June 20, 1993. The experiment was arranged in a split plot design with three replications. The main plots consisted of the harvesting dates such as early(24 May), mid(8 June) and late(20 June). The subplots consisted of different maturities of oat cultivm such as Speed oat, Cayuse, Foothill, Sv841034 and Magnum.

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.7-18
• /
• 2006

The Purpose of this study is to develop landscape Preference and define elements of difference in landscape preference of the 1-span Steel Box Girder Bridge by Bridge Shape Parameters(BSP) through Design of Experiments. Lately, the 1-span Steel Box Girder Bridge is dominations much component ratio and the Steel Box Girder Bridge has strong Points that is economically Profitable and management has easy when construct. but landscape preference of the 1-span Steel Box Girder Bridge was evaluated low because impression of landscape is being surfeited and dulled. Do to consider optimization in design that give change to Bridge Shape Parameters(BSP) to supplement this shortcoming in this study. Therefore, this study changes Bridge Shape Parameters(BSP) and extract elements that influence in landscape preference of the 1-span Steel Box Girder Bridge. and based on the design that consider landscape Preference of the 1-span Steel Box Girder Bridge, some essential guidelines for rational design of the 1-span Steel Box Girder Bridge suggested.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.4
• /
• pp.344-351
• /
• 2009

Purpose: Optical imaging is providing great advance and improvement in genetic and molecular imaging of animals and humans. Optical imaging system consists of optical imaging devices, which carry out major function for monitoring, tracing, and imaging in most of molecular in-vivo researches. In bio-luminescent imaging, small animals containing luciferase gene locally irradiate light, and emitted photons transmitted through skin of the small animals are imaged by using a high sensitive charged coupled device (CCD) camera. In this paper, we introduced optical imaging system for the image acquisition of bio-luminescent signals emitted from small animals. Materials and Methods: In the system, Nikon lens and four LED light sources were mounted at the inside of a dark box. A cooled CCD camera equipped with a control module was used. Results: We tested the performance of the optical imaging system using effendorf tube and light emitting bacteria which injected intravenously into CT26 tumor bearing nude mouse. The performance of implemented optical imaging system for bio-luminescence imaging was demonstrated and the feasibility of the system in small animal imaging application was proved. Conclusion: We anticipate this system could be a useful tool for the molecular imaging of small animals adaptable for various experimental conditions in future.

• Korean Journal of Food Science and Technology
• /
• v.40 no.5
• /
• pp.540-544
• /
• 2008

In this study, response surface methodology was employed in order to optimize the limonin and nomilin extraction conditions from citron seed. The independent variables were extraction temperature, extraction time, and shaking velocity. The yield of limonin and nomilin increased with increased extraction temperature and time. The extraction effects on the limonin and nomilin were higher at extraction temperature (p<0.01). The predicted extraction conditions were validated through actual experiments. The predicted conditions were as follows: $49.7^{\circ}C$ of extraction temperature, 3.3 hr of extraction time, and 400.6 rpm of shaking velocity for the maximum limonin contents (353.9 mg/100 g) and $50.3^{\circ}C$, 3.5 hr, and 399.9 rpm for the maximum nomilin contents (214.5 mg/100 g). The experimental values of limonin and nomilin contents at the predicted conditions were 338.8 and 219.5 mg/100 g, respectively. The predicted values at the optimized conditions were acceptable when compared to the experimental values.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.2
• /
• pp.174-188
• /
• 2004

In the life environment changed with not only the quality and the price of the products but also the material abundance, it is the most crucial factor for the strategy of product sales to investigate consumer's sensibility and preference degree. In this perspective, it is necessary to design and merchandise the products in cope with each consumer's sensibility and needs as well as its functional aspects. In this paper, we propose the Fashion Design Recommender Agent System (FDRAS-pro) for textile design applying collaborative filtering personalization technique as one of the methods of material development centered on consumer's sensibility and preference. For a collaborative filtering system based on textile, Representative-Attribute Neighborhood is adopted to determine the number or neighbors that will be used for preferences estimation. Pearson's Correlation Coefficient is used to calculate similarity weights among users. We build a database founded on the sensibility adjectives to develop textile designs by extracting the representative sensibility adjectives from users' sensibility and preferences about textile designs. FDRAS-pro recommends textile designs to a customer who has a similar propensity about textile. To investigate the sensibility and emotion according to the effect of design factors, fertile designs were analyzed in terms of 9 design factors, such as, motif source, motif-background ratio, motif variation, motif interpretation, motif arrangement, motif articulation, hue contrast, value contrast, chroma contrast. Finally, we plan to conduct empirical applications to verify the adequacy and the validity of our system.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.225-231
• /
• 2002

The physicochemical characteristics of pine nuts gruel were investigated to find the effects of processing condition during the processing. Three-dimensional response surface methodology was applied to investigate effects of ratio of water volume and pine nuts weight to rice weight and heating time on dependent variables of the physicochemical characteristics. The dependent variables in physicochemical characteristics were viscosity (cP), spreadability (cm), pH, soluble solid content (%), color, total sugar (%) and amylose content (%). The F-value of ratio of water volume and pine nuts weight to rice weight and heating time to viscosity were 8.91, 4.54 and 5.02 respectively and they are significantly different at 5% level. The F-value to spreadability were 5.44, 7.88 and 8.04 respectively and they are significantly different at 5% level. These results suggest that water volume, pine nuts weight and heating time greatly affect the viscosity and spreadability of pine nuts gruel. The processing condition also affect the soluble solid content. The changes of the processing condition did not affect the pH of pine nuts gruel. We found that the L, a, b value were affected more by ratio of water volume and pine nuts weight to rice weight than by heating time. The water volume affected more the total sugar and amylose content of pine nuts gruel than pine nuts weight and heating time.

• Journal of the Korean Society for Railway
• /
• v.18 no.3
• /
• pp.175-185
• /
• 2015

Generally, in the train area, switch tracks have required high reliability because this system is directly associated with derailment. Especially, switch tracks of Maglev vehicles must be moved in terms of the whole geometric characteristics, in which the bogies are encased in the switch track. For this reason, switch track was constructed with steel lighter than concrete girders. But, the steel switch track was weak because of structural vibration as well as structural deformation. Therefore, it is important to predict the levitation stability when a vehicle passes over flexible switch track. The aims of this paper are to develop a coupled dynamic model to describe the relationship between a Maglev vehicle and switch track and to predict the levitation stability. In order to develop the coupled dynamic model, a three dimensional vehicle model was developed based on multibody dynamics; a switch model was made using the modal superposition method. And, the developed model was verified using comparison measured data.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.223-252
• /
• 2015

Previous literature reviews have provided important insights into social game addictions, but the issue still needs to be examined from other directions such as the distribution of research purposes. For this purpose, 61 papers from selected journals were analyzed by a meta-analysis method. Specifically, this study poses the following three research questions: (1) What are the major of research purposes and methodologies? (2) What are the highly cited articles in studies of social game addictions? Results showed five new findings: (1) the research purpose of most social game addictions studies focuses on investigating the effect, followed by evaluating the influence of social game addictions. (2) Surveys and experimental methods were the preferred research methods, regardless of whether the research purpose focused on investigating or evaluation. (3) Social game addictions studies are most prevalent at the game users, higher education institutions, followed by schools. (4) Social game addictions studies most frequently supports researcher in the professions and applied sciences, followed by humanities, formal sciences and social sciences. (5) The most highly cited articles fall into the categories of investigating the effects and followed by evaluating the influence, designing a model and evaluating the effects of social game addictions. In this regard, this study of issues in social game addictions presents findings that can help supplement linkages with previous studies and forms an important reference base to pursue deeper academic discussions in the current research fields. These results and findings not only to supplement understanding of social game addictions based on different and important viewpoints, but also to provide useful insights for researchers and educators into issues related to social game addictions studies in future.