• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.179-187
• /
• 2015

The purpose of this study is to identify the aspect that the traffic distribution function changes, according to the direction of the datum line and the horizontal and vertical positions of the datum point applied when it is calculated. Targeting routes at the entrance of Mokpo Harbor, this study tested using AIS survey data of January 2013 the effects of the three variables-direction of the datum line(${\theta}$), horizontal position($\mathfrak{L}_H$) and vertical position($\mathfrak{L}_V$) on mean ($\bar{x}$) and standard deviation (${\delta}$). The test result showed that $\bar{x}$ and ${\delta}$ were changed according to the change of ${\theta}$, because the extracted sample data were changed according to ${\theta}$; and the changes of $\bar{x}$ and ${\delta}$ according to ${\theta}$ were drawn as the relation of the sine function' sum. In addition, it was found that setting up ${\theta}$ that the change value of ${\delta}$ becomes the least as the direction of the datum line was valid, to determine the optimum passage distribution function on complex waters with multiple branches of route. The result of this study is expected to be used as basic data to understand maritime traffic flow based on more quantified data of normal distribution and make decisions related to maritime traffic safety management.

• Journal of Conservation Science
• /
• v.27 no.2
• /
• pp.127-134
• /
• 2011

In this study, there has been investigated the simulation of irradiation dose using Monte Carlo methodology and experimental substantiation for the biological control of wooden cultural property. In the evaluation of fungal contamination on wooden cultural property, Dongyae, from exhibition storage, Aureobasidium pullulans was mainly identified. But these microorganisms were completely inactivated by 20 kGy gamma irradiation. For dosimetry simulation of Dongyae, Monte Carlo methodology with MCNP was used. The real dosimetry was measured using alanin dosimeters (at 7 different points on the front plan and 7 points on the back plan). Simulated and experimental results are compared and good agreement is observed. These result shows that irradiation can offer biologic control of wooden cultural property by optimal irradiation dose through high penetration power and Monte Carlo simulation.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.8
• /
• pp.444-451
• /
• 2016

Most research on membrane fouling models in the past are based on theoretical equations in lab-scale experiments. But these studies are barely suitable for applying on the full-scale spot where there is a sequential process such as filtration, backwash and drain. This study was conducted in submerged membrane system which being on operation auto sequentially and treating wastewater from G-water purification plant in Incheon. TMP had been designated as a fouling indicator in constant flux conditions. Total volume of inflow and SS concentration are independent variables as major operation parameters and time-series analysis and prediction of TMP were conducted. And similarity between simulated values and measured values was assessed. Final prediction model by using genetic algorithm was fully adaptable because simulated values expressed pulse-shape periodicity and increasing trend according to time at the same time. As results of twice validation, correlation coefficients between simulated and measured data were $r^2=0.721$, $r^2=0.928$, respectively. Although this study was conducted limited to data for summer season, the more amount of data, better reliability for prediction model can be obtained. If simulator for short range forecast can be developed and applied, TMP prediction technique will be a great help to energy efficient operation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.1
• /
• pp.18-26
• /
• 2001

Landsat TM band ratio algorithms were made by in-water optical measurement data of each sampling points for water quality monitoring of coastal area using Landsat TM satellite data. The algorithm was derived from in-water optical reflectance data which was measuring by the PRR(profiling reflectance radiometer). And, in-water optical reflectance data were applied to Landsat TM bands. Relationship between in-water optical reflectance and pigments proposed by the ratio of TM band 1 and band 2 showed to as follows; $Y=3.8352{\times}(R(band\;1)/R(band\;2))^{-2.1978}$ ($R^2$=0.7069) and, relationship of the ratio of TM band 1 and band 3 as follows; $Y=23.288{\times}(R(band\;1)/R(band\;3))^{-1.5243}$ ($R^2$=0.8062). Calculated the upwelling radiance of water surface and radiance of TM showed the ratio of atmospheric effect. In the coastal area Rayleigh and Mie scattering of atmosphere is to make over 80% of normalized radiance of Landsat TM. In order to apply in-water algorithm obtained by PRR, we had to calculate the atmospheric effects at sampling site. And, the quantitative analysis of in-water components using Landsat TM data need the calibration of in-water algorithm and effective method of atmospheric correction.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.194-205
• /
• 2006

The purpose of this study is to develop a pedestrian multi-agent model and simulation system using multi-agent theory, which may be utilized as a planning support system for building a comfort and safe environment of pedestrian street. Differing from existing pedestrian models, however, every single pedestrian was regarded as an individual agent in the model. Multiple agents like multiple pedestrians in the street then maintain their own characteristics and respond to surrounding environment. In addition their moving behavior are made by their own decision rules that they have or had acquired through the interactive communications or learning between agents like real world. After verifying the model validation, as the $R^2$ between the predicted value and observed value was up to 0.781, the developed model was applied to Gazwa district within Gyeongsang university village. The simulation system was developed by Flash MX action scripts and the physical environment of the streets was configured with the digital map and ArcGis within computer virtual space. The attribute data of buildings such as type and size of commercial business were collected through the field survey and combined with physical features. Then the effect of the variation of building attractiveness and the occurrence of street events to pedestrian environment were simulated. Through the experiments this study could make suggestions to improve pedestrian environment.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.35-46
• /
• 2007

In the study digital imagery was used to examine asphalt concrete pavements. With digitally mastered-image information that was filmed with a video camera fixed on a car travelling on road at a consistent speed, a road surface management system that can gain road surface information (Crack, Rutting, IRI) was developed using an object-oriented language "Delphi". This system was designed to improve visualized effects by animations and graphs. After analyzing the accuracy of 3-D coordinates of road surfaces that were decided using multiple image orientation and bundle adjustment method, the average of standard errors turned out to be 0.0427m in the X direction, 0.0527m in the Y direction and 0.1539m in the Z direction. As a result, it was found to be good enough to be put to practical use for maps drawn on scales below 1/1000, which are currently producted and used in our country, and GIS data. According to the analysis of the accuracy in crack width on 12 spots using a digital video camera, the standard error was found to be ${\pm}0.256mm$, which is considered as high precision. In order to get information on rutting, the physically measured cross sections of 4 spots were compared with cross sections generated from digital images. Even though a maximum error turned out to be 10.88mm, its practicality is found in work efficiency.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.166-173
• /
• 2008

Recently, problem of earth environment being attended with international issue, people are concerned about the environmentally-friendly and renewable biomass energy. Especially, the forest biomass is more important because Korea have to control carbon footprint for Kyoto Protocol and Convention on Climate Change. In case of Korea, forest area covers the land about 2/3 of all country. It is needed that more economical and efficient method to estimate the biomass by remote sensing data which include wide coverage and is progressed by one-step. In this study, we estimate forest biomass with LiDAR data and aerial photograph. Three biomass equation is used and estimate mean biomass of single tree and entire biomass in plots. The results are compared with field data. $R^2$ of the mean biomass of single tree is greater than 0.8 and that of entire biomass in plots is greater than 0.65. In conclusion, the method using remote sensing data is verified more economical and efficient than previous field data method.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.4
• /
• pp.19-33
• /
• 2008

Dynamic response measurements from natural excitation were carried out for 25- and 42-story buildings to evaluate their inherent properties, such as natural frequencies, mode shapes and damping ratios. Both are reinforced concrete buildings adopting a core wall, or with shear walls as the major lateral force resisting system, but frames are added in the plan or elevation. In particular, shear walls in a 25-story building are converted to frames from the 4th floor level downwards while maintaining a core wall throughout, resulting in a fairly complex structure. Due to this, along with similar stiffness characteristics in the principal directions, significantly coupled and closely spaced modes of motion are expected in this building, making identification rather difficult. By using various state-of-the-art system identification methods, the modal parameters are extracted, and the results are then compared. Three frequency-domain and four time-domain based operational modal identification methods are considered. Overall, all natural frequencies and damping ratios estimated from the different identification methods showed a greater consistency for both buildings, while mode shapes exhibited some degree of discrepancy, varying from method to method. On the other hand, in comparison with analysis results obtained using the initial finite element(FE) models, test results exhibited a significant difference of about doubled frequencies, at least for the three lower modes in both buildings. To improve the correlation between test and analysis, a few manual schemes of FE model updating based on plausible reasons have been applied, and acceptable results are obtained. The advantages and disadvantages of each identification method used are addressed, and some difficulties that might arise from the updating of FE models, including automatic procedures, for such large structures are carefully discussed.

• Journal of Korean Society of Forest Science
• /
• v.89 no.5
• /
• pp.564-575
• /
• 2000

This study was carried out to reveal characteristics of long-term runoff by using HYCYMODEL in a small forested watershed. From May to September in 1998 and in 1999, the fitness of HYCYMODEL and runoff characteristics were estimated by HYCYMODEL using rainfall and discharge at the experimental watershed. The function of stage and discharge in the experimental watershed was determined as following equation $Q=11.148H^{2.5867}$($R^2=0.9956$). From May to September in 1998 and in 1999, the runoff rates were 57.7% in 1998 and 87.1% in 1999 at the experimental watershed. The discharge was assumed to be increased because of rainfall intensity difference and thinning. By applicability test, the HYCYMODEL showed good estimation of runoff by optimized fifteen parameters. Comparing runoff characteristics before and after thinning by calculating through HYCYMODEL, direct runoff and base runoff increased 4%, 7%, respectively as evapotranspiration decreased 11%. Parameters $D_{50}$ and $K_h$, which were related to the direct run, and a parameter $K_u$, which was related to the baseflow, were assumed to indicate that forest was changed by the effect of thinning and weathering process of bed rock.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.803-809
• /
• 2018

Generally, the gap-and-sag method is used in the shipbuilding stage before coupling the shafts to check whether they are installed at the same position as designed and derived from shaft alignment calculation. The primary installed propeller shaft becomes a reference point, the position of the remaining shafts are sequentially determined through the gap-and-sag value derived from the deflection and deflection angle at each shaft flange by own weight. If the reference point varies against the design value, it would have a series of effects on the installation of the remaining shafts. Moreover, after coupling the shafts, even if the bearing reaction forces derived from measurement are satisfied by the allowable limit range, consequently it might have an adverse effect on the stability of the shafting system by not being able to estimate the relative slope angle between the propeller shaft and the after-stern tube bearing. In this paper, to deal with above-mentioned phenomenon, the theoretical calculations related to designing an effective support point of the aft stern tube bearing and analysis by measurement is conducted through a case of open-up inspections. Based on this, a shaft installation guideline is proposed to minimize the misalignment related to preventing wiping damage of the after-stern tube bearing.