• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.31-44
• /
• 1970

This experiment is conducted fer method cf bring to perfectly from defective cutting sapling 25 a production method of sapling which is to substitute for conventional graf ting. 1. In green wood cutting root comes out after 15 days of cutting with nearly straight development of root system; after 40 days of cutting, roots with total length of 1119 mms 43 roots, and 5.4 grs a root in total weight obtained. 2. Survival percentage of green wood cutting ranges between 56％ and 90％, average 73％ of that and it varies with natural characteristics of varietes. The results show variety of Gaeryang-Suban and Iljiroe with 80％ as a best ones in contrast with the variety of Shipyung. 3. The varietics or Gaeryang-Suban. Iljiroe, Suwon-Sang No.4, Rosang makes of much more roots than Yongchonchuwoo and Shipyung do. 4. Root ability made good number of roots commercially, when cutting is conducted soaking in 0.01 ％ NAA solution or 0.02％ NAA solution for 2 or 3 seconds as a chemical promoter. 5. Economical measures for increase of scion adapted 1) 2 scions from a green wood 50 cm long should be taken and basal pan of scion at its middle portion should be cut right under the node. 2) Scions below 50cm long may be used. Small scions or growthceased shoots h3ve also considerable root ability enough to be used. 3) Thus far, up 100,000 scions might be produced in 10 a. 6. We can find number of root increased, when cutting the opposite side in obliquity manner at 450. 7. When 110,000 saplings in 10 a. for the production of bring to perfectly from defective cutting sapling planted, quality of stocks does not go to bad condition without any obstacles in practical use. 8. Although the times or grafting delayed until middle of July, quality of sapling goes just a little down. Grafting may be conducted from early June to middle of July separately in several times, and the green wood of prunned mulberry in spring is available for a scion after end of June. 9. 10 grs weight of defective cutting sapling makes 95％ of complete sapling, otherwise 5 or 10 grs in weight of one becomes 80％ of complete sapling with its quality as similar as grafted one. 10. When the sapling planted, its branches should be cut, leaving 3 or 4 buds at the bottom of new branches. 11. In view of economical stand point, production cost of bring to perfectly from defective cutting sapling obtains 52％ of grafting cost.

• Tuberculosis and Respiratory Diseases
• /
• v.50 no.3
• /
• pp.343-352
• /
• 2001

Background : Advanced chronic obstructive pulmonary disease is characterized by progressive pulmonary hypertension leading to right heart dysfunction, which plays a Important role in clinical evaluation but remains difficult and challenging to quantify. The noninvasive doppler echocardiographic value referred to as the Tei index has been suggested as a simple, reproducible and reliable parameter of the right ventricular function. The purpose of this was to assess the right ventricular function in patients with chronic obstructive pulmonary disease using the Tei index and to evaluate its relationship with the pulmonary functional status. Methods : The study population comprised of 26 patients with chronic obstructive pulmonary disease and 10 normal control subjects. The Tei index was obtained by dividing the sum of the isovolumetric contraction and the relaxation times by the ejection time using a pulsed-wave doppler. It was compared with the other available Doppler echocardiographic parameters of systolic or diastolic function and with the pulmonary function of the patients. Results : The Tei indices of the patients with COPD were significantly higher than those of normal subjects($0.45{\pm}0.17$ vs. $0.27{\pm}0.03$, p<0.01). The isovolumetric contraction time/ejection time($0.32{\pm}0.08$ vs. $0.25{\pm}0.05$, p<0.05), the isovolumetric relaxation time/ejection time($0.29{\pm}0.16$ vs. $0.15{\pm}0.08$, p<0.05)and the preejection period/ejection time ($0.46{\pm}0.10$ vs. $0.38{\pm}0.06$, p<0.05) were prolonged and the ejection time ($255.2{\pm}32.6$ vs. $314.2{\pm}16.5$ msec, p<0.05) was significantly shortened in patients with COPD compared to normal subjects. The tei indices were inversely correlated with the $FEV_1$ (r=-0.46, p<0.05) and were prolonged significantly in patients with a severe obstructive ventilatory dysfunction(less than 35% of predicted $FEV_1$) compared to those with a mild and moderate ventilatory dysfunction. The tei indices showed an inverse correlation to with the ejection time (r=-0.469), the isovolumetric contraction time/ejection time(r=0.453), the isovolumetric relaxation time/ejection time(r=0.896) and the preejection period/ejection time(r=0.480). Conclusion : The tei index appeared to be a useful noninvasive means of evaluating the right ventricular function. It revealed a significant correlation with the pulmonary function in patients with COPD.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.7
• /
• pp.21-28
• /
• 2017

Practical models for FPGA architectures which include performance- and/or density-enhancing components such as carry chains, wide function multiplexers, and memory/multiplier blocks are being applied to academic FPGA placement tools which used to rely on simple imaginary models. Previously the techniques such as pre-packing and multi-layer density analysis are proposed to remedy issues related to such practical models, and the wire length is effectively minimized during initial analytic placement. Since timing should be optimized rather than wire length, most previous work takes into account the timing constraints. However, instead of the initial analytic placement, the timing-driven techniques are mostly applied to subsequent steps such as placement legalization and iterative improvement. This paper incorporates the timing driven techniques, which check if the placement meets the timing constraints given in the standard SDC format, and minimize the detected violations, with the existing analytic placer which implements pre-packing and multi-layer density analysis. First of all, a static timing analyzer has been used to check the timing of the wire-length minimized placement results. In order to minimize the detected violations, a function to minimize the largest arrival time at end points is added to the objective function of the analytic placer. Since each clock has a different period, the function is proposed to be evaluated for each clock, and added to the objective function. Since this function can unnecessarily reduce the unviolated paths, a new function which calculates and minimizes the largest negative slack at end points is also proposed, and compared. Since the existing legalization which is non-timing driven is used before the timing analysis, any improvement on timing is entirely due to the functions added to the objective function. The experiments on twelve industrial examples show that the minimum arrival time function improves the worst negative slack by 15% on average whereas the minimum worst negative slack function improves the negative slacks by additional 6% on average.

• The Korean Journal of Air & Space Law and Policy
• /
• v.19 no.1
• /
• pp.9-35
• /
• 2004

A launching State shall be absolutely liable to pay compensation for damage caused by its space object on the surface of the earth or to aircraft in flight. The compensation which the launching State shall be liable to pay for damage under "the Convention on International Liability for Damage caused by Space Objects" shall be determined in accordance with international law and the principles of justice and equity, in order to provide such reparation in respect of the damage as will restore the person, natural or juridical, State or international organisation on whose behalf the claim is presented to the condition which would have existed if the damage had not occurred. In the event of damage being caused elsewhere than on the surface of the earth to a space object of one launching State or to persons or property on board such a space object by a space object of another launching State, and of damage thereby being caused to a third State or to its natural or juridical persons, the first two States shall be jointly and severally liable to the third State, to the extent indicated by the following: If the damage has been caused to the third State on the surface of the earth or to aircraft in flight, their liability to the third State shall be absolute; If the damage has been caused to a space object of the third State or to persons or property on board that space object elsewhere than on the surface of the earth, their liability to the third State shall be based on the fault of either of the first two States or on the fault of persons for whom either is responsible. The Insurance requirements are satisfied for a launch or return authorised by a launch permit if the holder of the permit or authorisation is insured against any liability that the holder might incur to pay compensation for any damage to third parties that the launch or return causes; and the Commonwealth is insured against any liability that Commonwealth might incur, under the Liability Convention or otherwise under international law, to pay compensation for such damage. The liability for Damage caused by Space Objects should be regulated in detail in Korea.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.3
• /
• pp.411-418
• /
• 2014

Three mushroom mycelia, Ganoderma lucidum, Hericium erinaceum, and Phellinus linteus, were separately diluted with the natural culture media Acanthopanax senticosus. Solid-state fermentation was used to produce three different A. senticosus-fermented mushroom mycelium groups: G. lucidum mycelia, H. erinaceum mycelia, and P. linteus mycelia. The resulting mycelia were analyzed to assess their efficacies as health functional foods. Optimized fermentation conditions were determined by considering the density and growth speed of mycelia in each A. senticosus-fermented mushroom mycelium group. The cultured mushroom mycelia under the optimized conditions were extracted using water and 70% ethanol. Extraction was followed by filtration, concentration and freeze-drying to produce extract powder of A. senticosus-fermented mushroom mycelia: Water extracts (FM-5111, FM-5121, and FM-5131) and 70% ethanol extracts (FM-5112, FM-5122, and FM-5132). Analysis of extract powder of A. senticosus-fermented mushroom mycelia was performed using the maker compounds eleutheroside B and eleutheroside E. Analysis of ${\beta}$-glucan contents was performed by enzymatic procedures.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.5
• /
• pp.60-70
• /
• 2017

This study traces the development of physic gardens in Korea and explores their significance in the history of landscape architecture. For this purpose, records related to physic gardens from medical sources from the period of the Three States to the Joseon dynasty, when herbal medicine was systematized as a field, were searched. Physic gardens had been developed by the time of the late Goryeo and early Joseon dynasties, in the 13th and the 15th centuries. Yakpo(kitchen gardens for medicinal herbs) were cultivated by a group of new high-level officials in the late Goryeo dynasty, when an increasing interest in hyangyak(native herbs) emerged under the influence of the Neo-Confucian perspective on nature, which emphasized locality. The sources analyzed in this study confirm that physic gardens called jong-yakjeon(royal medicinal herb gardens) were in operation in the early Joseon dynasty when policies to investigate, discover, cultivate, and research native herbs were put into place. It is likely that the jong-yakjeon were established at the beginning of the Joseon dynasty as subsidiary facilities under its central medical institutions, the Naeuiwon and Hyeminseo, and then declined in the late Joseon dynasty. Jong-yakjeon can be confirmed to have existed in the mid-15th century. Physic gardens were located in several places outside the Fortress Wall of Hanyang, such as Yakhyeon, Yuldo, Yeoudo, and Saari. The total area encompassed by physic gardens was about 160,000 square meters in the early 18th century. In jong-yakjeon, dozens of medicinal herbs were cultivated, including Schizonepeta tenuifolia var. japonica, Rehmannia glutinosa, and Glycyrrhiza uralensis Fischer, and these gardens were operated by physicians dispatched from the Naeuiwon and dozens of provincial slaves. In conclusion, the jong-yakjeon were similar to the physic gardens of Renaissance medical universities in that they reflected the interest in and development of theories about new herbs, and were similar to the physic gardens of medieval castles and monasteries in terms of species types, location, and function. This paper has limitations in that it does not present the specific spatial forms of the yakpo or the jong-yakjeon. Nevertheless, this paper is significant for the field of garden history because it shows that physic gardens in Korea appeared in the late Goryeo and early Joseon dynasties concomitantly with the development of medicine towards native herbs and functioned as utilitarian gardens to cultivate community remedies.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.246-253
• /
• 1994

Four Quercus forests in Mt. Mohu were studied to investigate biomass, net production and effective biomass estimation method. Five $10m{\times}10m$ quadrats were set up, ten sample trees were cut and roots of three sample trees were excavated for dimension analysis in each forest. There was little difference in accuracy among three allometric biomass regression models of logWt=A+BlogD, $logWt=A+BlogD^2H$ and logWt=A+BlogD+ClogH, where Wt, D and H were dry weight, DBH and height, respectively. Analysis of covariance showed that there were no significant differences among slopes and intercepts of allometric biomass regressions, logWt=A+BlogD, of four Quercus species. Biomass of Q. acutissima, Q. nariabilis, Q. serrata and Q. mongolica forests were 164.0, 158.9, 115.3 and 118.9t/ha, respectively. Net production of Q. acutissima, Q. variabilis. Q. serrata and Q. mongolica forests were 25.0, 23.2, 14.5 and 12.6t/ha/yr., respectively. The proportion of roots to total biomass and total net production of Q. mongolica forest was higher than that of three other species forests. Net assimilation ratio of Q. acutissima, Q. variabilis, Q. serrata and Q. mongolica forests were 2.87, 2.80, 3.20 and 2.95, respectively. Relatively less leaf biomass of Q. serrata and Q. mongolica forests were the reason why total biomass and total net production of Q. serrata and Q. mongolica forests were less than those of Q. acutissima and Q. variabilis.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.69-81
• /
• 2014

Herman $F{\ddot{u}}rst\;P{\ddot{u}}ckler-Muskau$ is one of important figures in German landscape architecture who designed both Muskau Park and Branitz Park and published garden book Andeutungen ${\ddot{u}}ber$ Landschaftgartenerei (Hints on Landscape Gardening) in 1834. He was a German nobleman who governed Muskau estates while working as both a writer and a landscape gardener. German landscape gardening was grounded on Romanticism, which was represented in diverse ways such as the reconciliation between man and nature, the liberation of reason, and the pursuit of liberty. The intellectuals came to have an interest on landscape gardening since the garden carried the cultural connotation such as the idealized epitome of nature. This study is to investigate how his idea of landscape gardening had been developed through his personal life and social background and to find out his landscape gardening theory and its unique gardening techniques. Finally, the inventive aspect of his garden theory and contemporary significances in practices were discussed. $P{\ddot{u}}cklers^{\prime}$ personal experience and social background provide us to understand the idea of garden. First, there was a mixture between reality and fantasy in his garden theory. It was due to the influence of Romanticism and literary garden. Second, his gardening mentality and technique were influenced by the late 18th century English garden practices, which emphasized the expressive aspects. Third, $P{\ddot{u}}cklers^{\prime}$ inner disposition and personal experience were represented in his garden design. Fourth, the intention of creating landscape garden for the local people might be a self realization of his contradictory characters between falling nobleman and liberal social leader. The significant value of $P{\ddot{u}}ckler^{\prime}s$ garden idea might be closely related in the dual nature of humanistic garden tradition and garden practice for social agenda. Therefore, his garden idea pursued of the comprehensive landscape strategies toward ideal communities and ethical spirits while concerning ecological, social, economic sustainable development of the region. Furthermore, his landscape gardening aims at the total landscape encompassing garden to region as well as the Gesamtkunst combing the beautiful with the useful. $P{\ddot{u}}ckler^{\prime}s$ holistic attitude gives us fresh insights and new directions to contemporary landscape theory and practice.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.17
• /
• pp.79-114
• /
• 1974

Experiments were conducted to clarify the variations of the ecological characteristics under different day-length and temperature conditions inperilla varieties from 1972 to 1973 in the experimental fields of Crop Experiment Station, O.R.D, Suwon. Thirty-six varieties were tested in the field in 1972 under 6 growing seasons differing seeding dates. from April 5th to June 20th with 15-day interval between each seeding. Pot-experiment also were conducted in 1972 and 1973. The seeds of the 6 varieties tested were sown on May 25th. In this pot-experiment natural condition was regarded as a short-day treatment and 100-W incandescent lamps were used for long-day treatment. Three selected varieties were grown under different. temperature treatments in phytotron in Crop Experiment Station. The results obtained are summarized as follows: 1. Most varieties tested flowered around September 6. The days required to flower were shortened gradually as the planting time was delayed. 2. The varieties used were matured around October 6, but the maturity was shortened when planted early. The days required for maturity after flowering was 26 to 30. 3. The growing period was also shortened gradually when planting time was delayed. 4. Plant height was reduced when planting time was delayed. 5. There were little differences in number of valid branches among planting time I, II and III, while the branch number was reduced as the planting time was delayed. 6. The dry matter weight was gradually increased from planting time I to III, while it was rapidly decreased after planting time IV. 7. It was found that the flowering of perilla was little affected by temperature. The varieties, however, were more sensitive to day-length. 8. No clear tendency was found in the plant height, number of valid branches and dry matter weight by the time and period of day-length and temperature treatments. 9. The highest yield was obtained at planting time III(May 5th) and the yield was decreased at either earlier or later planting. 10. 1, 000 grain weight appeared to be heavier as the planting time was delayed. 11. The number of flower cluster was largest at planting time III (May 5th) and it was decreased as planting time was earlier or later than III. 12. The oil content was also highest at planting time III (May 5th). 13. Days to flowering, days to maturity and total growing period and flowering period did not affect the yield much. 14. The number of valid branches, flower clusters, 1, 000-grain weight and dry matter weight were positively correlated with yield. The relationship between these characters and yield were variable depending upon the planting time.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.700-707
• /
• 1997

In order to express exactly the total resistance of bottom trawl nets subjected simultaneously to the water flow and the bottom friction, the influence of frictional force was added to the formular for the flow resistance of trawl nets obtained by previous papev and the experimental data obtained by other investigators were analyzed by the formula. The analyzation produced the total resistance R (kg) expressed as $$R=4.5(\frac{S_n}{S_m})^{1.2}S\;v^{-1.8}+20(Bv)^{1.1}$$ where $S(m^2)$ was the wall area of nets, $S_m\;(m^2)$ the cross-sectional area of net mouths, $S_n\;(m^2)$ the area of nets projected to the plane perpendicular to the water flow, B (m) the made-up circumference at the fore edge of bag parts, and v(m/sec) the dragging velocity. From the viewpoint that expressing R in the form of $R=kSv^2$ was a usual practice, however, the resistant coefficient $k(kg{\cdot}sec^2/m^4)$ was compared with the factors influencing it by reusing the experimental data. The comparison gave that the coefficient k might be expressed approximately as a function of BL only and so the resistance R (kg) as $$R=18{\alpha}B^{0.5}L\;v^{1.5}$$ where L (m) was the made-up total length of nets and $\alpha=S/BL$. But the values of a in the nets did not deviate largely from their mean, 0.48, for all the nets and so the general expression of R (kg) for all the bottom trawl nets could be written as $$R=9\;B^{0.5}\;L\;v^{1.5}$$.