• The KIPS Transactions:PartB
• /
• v.13B no.2 s.105
• /
• pp.105-114
• /
• 2006

In ubiquitous environment where various kinds of computers are embedded in persons, objects and environment and they are interconnected and can be used in my place as necessary, different types of data need to be exchanged between heterogeneous machines through home network. In the environment, the efficient processing, transmission and monitoring of image data are essential technologies. We need to make research not only on traditional image processing such as spatial and visual resolution, color expression and methods of measuring image quality but also on transmission rate on home network that has a limited bandwidth. The present study proposes a new motion vector estimation algorithm for transmitting, processing and controlling image data, which is the core part of contents in home network situation and, using algorithm, implements a real time monitoring system of multi dimensional images transmitted from multiple cameras. Image data of stereo cameras to be transmitted in different environment in angle, distance, etc. are preprocessed through reduction, magnification, shift or correction, and compressed and sent using the proposed metamorphosis hierarchical motion vector estimation algorithm for the correction of motion. The proposed algorithm adopts advantages and complements disadvantages of existing motion vector estimation algorithms such as whole range search, three stage search and hierarchical search, and estimates efficiently the motion of images with high variation of brightness using an atypical small size macro block. The proposed metamorphosis hierarchical motion vector estimation algorithm and implemented image systems can be utilized in various ways in ubiquitous environment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.548-548
• /
• 2015

과거 1990년대에 인터넷 이용이 전 세계로 확산되면서 World Wide Web를 이용하여 다양한 웹 서비스 기술의 구현 및 유통은 현재에도 개발되고 있다. 일반적으로 오늘날의 서비스는 XML 및 인터넷을 통하여 웹 서비스로 구현한 응용프로그램간의 연동을 가능하게 하는 기반기술이다. 이는 단순 객체 접근 프로토콜(SOAP), 웹 서비스 기술 언어(WSDL), 전역 비즈니스 레지스트리(UDDI) 등의 표준 기술을 사용하여 네트워크에 연결된 다른 컴퓨터 간의 분산 컴퓨팅을 지원하는 소프트웨어 및 기술이다. 이러한 웹 서비스의 발전으로 웹 서비스의 성능이 웹 서비스 제공자의 성패를 좌우하게 되고, 제공하고 있는 웹 서비스에 대한 검증이 필요하게 되었다. 웹 서비스에 대한 검증은 미국 Bloor NA(Bloor Research-North America)에서 웹 서비스 아키텍처의 단점을 발표하여 서비스의 품질과 신뢰성 및 개선점에 대하여 제시되어 활발한 연구가 진행 중에 있다. 그러나 사용자 관점에서 웹 서비스의 성능을 측정하고, 단순한 서비스 제공자의 서비스 검증 목적만이 아닌 서비스 제공자의 성능을 서비스 사용자에게 제공하는 검증 방법에 관한 연구가 많지 않은 실정이다. 하천공간정보에 대하여 웹 서비스 방식 중 통신 프로토콜인 HTTP 등을 이용한 인터넷상의 메시지 교환을 가능하게 하는 통신 프로토콜인 SOAP 및 WWW와 같은 분산 하이퍼미디어 시스템을 위한 소프트웨어 아키텍처의 한 형식인 REST(Representational State Transfer)를 실행하여 이에 따른 검증 프로세스를 수립하였다. 하천공간정보 웹 서비스에 대한 테스트 시나리오는 응답시간, 임계성능, 이용가능성, 신뢰성 및 접근성에 대하여 검증하며 하나 이상의 웹 서비스들 간의 호환성 표준의 준수 여부와 상호 운용 가능 여부를 테스트 하는 상호운용성 테스트, 신뢰성 메시징 및 분산 환경에서의 트랜잭션 처리 성능을 검증하는 웹 서비스 프로세스 품질 테스트를 실시하는 방안을 도출하고자 한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.1
• /
• pp.58-63
• /
• 2014

Most of light duty AGVs(AGCs) using tape of magnetic for the guide path have digital guidance magnetic sensor. Digital guidance magnetic sensor using magnet-tape is on/off type and has positioning error of magnet-tape as 10~50 mm. AGC using this sensor doesn't induce accurate position of magnet-line which is magnet-tape because of magnetic field which motor in AGC creates, outer magnetic field, earth's magnetic field, etc. AGC when driving wobbles due to this error and this error can cause path deviation. In this paper, we propose fuzzy inference system for improvement of bipolar analog magnetic guidance sensor performance. Fuzzy is suitable in term of fault tolerance, uncertainty tolerance, real-time operation, and Nonlinearity as compared with other algorithms. In previous research, we produced bipolar magnetic guidance sensor and we set the threshold in order to calculate digital values of magnet position. Fuzzy inference system is designed using outputs of Analog hall sensors. Magnet position calculated by digital method is improved by outputs of this system. In result, proposed method was verified by improving performance of magnetic guidance sensor.

• Culinary science and hospitality research
• /
• v.22 no.5
• /
• pp.82-94
• /
• 2016

This study on CRM oftKorean restaurant guests to test the emotional response and behavioral intention. Three kinds of variables(service quality, information quality, system quality) from Korean restaurant guests were set to test the CRM. Results of the multiple regression analysis revealed a positive significant relationship with respect to quality of service, quality information, and quality system with all customer emtional reaction. Second, the results also found that the three independent variables of quality of service (${\beta}=.104$, P<.01), information quality (${\beta}=.215$, P<.001), and system quality (${\beta}=.682$, P<001) had a significant positive effect on the dependent variable for customer behavior (+). Third, CRM quality of service, quality information, and quality of the restaurant system are shown to influence the behavior and it also showed that both the part-mediated effects.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.3
• /
• pp.134-145
• /
• 2013

Road construction projects are parcelled into sub-sections which are then tendered to individual contractors for construction. The type of work and equipments used are similar for each sub-section. However, such equipment are not shared on a regular basis among the contractors and only partially performed in an informal and ad hoc manner. Consequently, road construction equipment suffer from low utilization and increased leasing costs. Lean construction and Program Management approaches stress the importance of collaboration among individual participants in a way that increases the collective cost savings of the entire project. This research attempts to apply such theories with the notion that under utilization of expensive equipment can be improved by formalizing a way to enable the sharing of equipment in large, public sponsored, multi-sectioned road construction projects. A system was developed consisting of a set of criteria and processes that enables automatic allocation of equipment to multiple sites on daily basis, in a way that minimizes equipment costs and improves their individual utility. The system was then applied in allocating three different types of equipment to an actual road construction project with four sub-sections for three months. A new metric, nDPR showed that utilization improved for all equipment and also equipment related costs were decreased by 4.45%. Results also showed that increased shared opportunities of equipment correspond to an increase in utilization and cost savings.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.233-244
• /
• 2017

We conducted hydraulic fracturing experiments on cement samples to investigate the dependency of fracture propagation on the viscosity of injection fluid and the in situ stress state. Ten cubic samples (20 cm side length) were produced using cement that was cured in water for more than one month. Samples were placed in a tri-axial compression apparatus with three independent principal stresses. An injection hole was drilled and the sample was hydraulically fractured under a constant injection rate. We measured injection pressures and acoustic emissions (AE) during the experiments, and investigated the fracture patterns produced by hydraulic fracturing. Breakdown pressures increased exponentially with increasing viscosity of the injection fluid. Fracture patterns were dependent on differential stress (i.e., the difference between the major and minor principal stresses). At low differential stress, multiple fractures oriented sub-parallel to the major principal stress axis propagated from the injection hole, and in some samples the fracture orientation changed during propagation. However, at high differential stress, a single fracture propagated parallel to the major principal stress axis. AE results show similar patterns. At low differential stress, AE source locations were more widespread than at high differential stress, consistent with the fracture pattern results. Our study suggests that hydraulic fracturing during shale gas extraction should be performed parallel to the orientation of minimum differential stress.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.91-101
• /
• 2014

In this study, we presented a timing verification method for a passenger car diesel engine management system (EMS) using measurement-based worst-case execution time (WCET) analysis. In order to cope with AUTOSAR-compliant software architecture, a development process model is proposed. In the process model, a runnable is regarded as a test unit and its temporal behavior (i.e. maximum observed execution time, MOET) is obtained along with on-target functionality evaluation results during online unit test. Furthermore, a cost-effective framework for online unit test is proposed. Because the runtime environment layer and the standard calibration environment are utilized to implement test interface, additional resource consumption of the target processor is minimized. Using the proposed development process model and unit test framework, the MOETs of 86 runnables for diesel EMS are obtained with 213 unit test cases. Using the obtained MOETs of runnables, the WCETs of tasks are estimated and the schedulability is evaluated. From the schedulability analysis results, the problems of the initially designed schedule table is recognized and it is fixed by redesigning of the runnable mapping and task offset. Through the various test scenarios, the proposed method is validated.

• Journal of KIISE:Databases
• /
• v.33 no.3
• /
• pp.271-281
• /
• 2006

Recently the need for Location-Based Service (LBS) has increased due to the development and widespread use of the mobile devices (e.g., PDAs, cellular phones, labtop computers, GPS, and RFID etc). The core technology of LBS is a moving-objects database that stores and manages the positions of moving objects. To search for information quickly, the database needs to contain an index that supports both real-time position tracking and management of large numbers of updates. As a result, the index requires a structure operating in the main memory for real-time processing and requires a technique to migrate part of the index from the main memory to disk storage (or from disk storage to the main memory) to manage large volumes of data. To satisfy these requirements, this paper suggests a unified index scheme unifying the main memory and the disk as well as migration policies for migrating part of the index from the memory to the disk during a restriction in memory space. Migration policy determines a group of nodes, called the migration subtree, and migrates the group as a unit to reduce disk I/O. This method takes advantage of bulk operations and dynamic clustering. The unified index is created by applying various migration policies. This paper measures and compares the performance of the migration policies using experimental evaluation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.622-628
• /
• 2016

As the suction pad-supporting bike carrier attached to a car may be subject to an excessive dynamic load due to random vibrations and centrifugal forces during driving, its structural safety is of great concern. To examine this, the finite-element method with a fluid-structure interaction should be used because the pressure on the pad bottom is changed in real time according to the fluctuations of the force or the moment applied on the pad. This method, however, has high computing costs in terms of modeling efforts and software expense. Moreover, the accuracy of computation is not easily guaranteed. Therefore, a new method combining the experiment and computation is proposed in this paper: the bottom pressure and contact area of the pad under varying loads was measured in real time and the acquired data are then used in the nonlinear elastic finite-element calculations. The computational and experimental results obtained with the product under development showed that the safety margin of the pad under the axial loading is relatively sufficient, whereas with an excessive rotational loading, the pad is vulnerable to separation or a local surface damage; hence, the safety margin may not be secured. The predicted contact behavior under the variation of the magnitude and type of the loading were in good agreement with the one from the experiment. The proposed analysis method in this study could be used in the design of similar vacuum pad systems.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.31-37
• /
• 2018

To enhance the recycling rate of used metal resources, it is strongly desired to develop a metal sorting system that can automatically identify metal type from mixed metal scraps and sort them separately. Laser-induced breakdown spectroscopy(LIBS) is a technique that enables real time classification of different metals based on multi-elemental and in-air analysis. In this work, we report the results of LIBS elemental analysis of field scrap samples acquired from a recycling company. By applying multivariate analysis, it was found that the LIBS signals of five different metals could be perfectly classified if surface contamination was removed. The classification accuracy degraded for LIBS signals including contaminant emission, which however could be overcome by performing the multivariate analysis using properly selected emission lines of higher correlation only. The significant improvement in classification accuracy and process speed by the selection of proper emission lines demonstrated the feasibility of LIBS technique as an industrial tool for metal scrap sorting.