• Journal of The Korean Association For Science Education
• /
• v.32 no.10
• /
• pp.1567-1579
• /
• 2012

This study carried a survey to investigate teacher's cognition on preference and actuality about science laboratory and class environment targeting 262 science teachers. The results of this study are as follow: First, the actuality cognition of science teachers on science laboratory and class environment was lower than preference (p<.05). Second, there were no differences between preference and actuality regardless of gender (p<.05). However, the cognition on all of subordinates of preference appeared higher in females than males (p<.05). Third, at all levels of schools, preference is higher than actuality for science laboratory and teaching environment (p<.05). In case of preference, all of the subordinates indicated the difference between elementary and high school teachers (p<.05). On the other hand, in actuality there was a difference between elementary and middle school teachers in 'science laboratory facilities condition' domain only (p<.05). Fourth, the preference was higher than actuality in all school locations (p<.05). And in case of preference, there was no difference in all subordinates regardless of school sites. Whereas the cognition of small-medium city teachers was lower than metropolitan in actuality on the three domains of 'science laboratory facilities condition,' 'teaching condition and service support,' and 'staff policy and practice' (p<.05). As a result, this study informs that upgrading is necessary to achieve inquiry activity in science class in overall teaching environment including science classroom and laboratory.

• Korean Journal of Poultry Science
• /
• v.7 no.2
• /
• pp.54-76
• /
• 1980

A survey was conducted to determine the status of health and productivity of poultry farms in Korea. Area included Was Kyunggido where exist nearly 50% of national poultry population. From this area, 41 layer and 34 broiler farms covering 21 Countries were selected randomly for the survey. When farms were divided in the operation size, 95.1% of layer and 82.3% of broiler farms were classified as business or industrial level while the rest were managed in a small scale as part time job. Generally layer farms had been established much earlier than broiler farms. Geographically 10.7% of layer farms were sited near the housing area such as field foreast and rice field. No farms were located near the seashore. The distance from one farm from the other was very close, being 80% of the farms within the distance of 1km and as many as 28% of the farms within loom. This concentrated poultry farming in a certain area created serious problems for the sanitation and preventive measures, especially in case of outbreak of infectious diseases. Average farm size was 5,016${\times}$3.3㎡ for layers and 1,037${\times}$3.3㎡ for broilers. 89.5% of layer ana 70.6% of broiler farms owned the land for farming while the rest were on lease. In 60% of layer farms welters were employed for farming while in the rest their own labour was used. Majority of farms were equipped poorly for taking necessary practice of hygiene and sanitation. The amount of disinfectant used by farms was considerably low. As many as 97.6% of lave. farms were practised with Newcastle(ND) and fowl pox(F$.$pox) vaccine, whereas only 43.6% and 5.1% of broiler farms were practised with ND and F$.$pox vaccine, respectively. In 17-32.7% of farms ND vaccine was used less than twice until 60 days of age and in only 14.6% of farms adult birds were vaccinated every 4months. Monthly expense for preventive measures was over 200,000W in 32% of farms. Only 4.9-2.7% of vaccine users were soaking advice from veterinarians before practising vaccination, 85% of the users trusted the efficacy of the vaccines. Selection of medicine was generally determined by the farm owner rather than by veterinarans on whom 33.3% of farms were dependant. When diseases outbroke, 49.3% of farms called for veterinary hospital and the rest were handled by their own veterinarians, salesmen or professionals. Approximately 70% of farms were satisfied with the diagnosis made by the veterinarians. Frequency of disease outbreaks varied according to the age and type of birds. The livabilities of layers during the period of brooding, rearing ana adultwere 90.5, 98.9 and 75.2%, respectively while the livalibility of broilers until marketing was 92.2%. In layers, average culling age, was 533.3 day and hen housed eggs were 232.7. Average feed conversion rates of layers and broilers were 3.30 and 2.48, respectively. Those figures were considerably higher than anticipated but still far lower than those in developed countries.

• Journal of Animal Environmental Science
• /
• v.10 no.1
• /
• pp.37-46
• /
• 2004

In order to investigate the effect of floor condition on the fattening performance of cattle, sixteen finishing Hanwoo steers of weighting 570kg were fed for 16 weeks to slaughter on two types of sawdust bedding pen oriented to the south(SP) and the north(NP) then obtained following results. The floor condition of SP roofed by transparent material was dry and flat during overall experimental period, whereas, that of NP roofed by solid slate was muddy and rough even in summer and fall, and then frozen in winter period resulted in interfering with the locomotion and resting behavior of steers. Average daily dry matter intake of steers was not different between tow treatments, however, the average daily gain of steers in NP and SP was 0.64kg and 0.75kg, respectively, meaning that gained 14.3% less for the NP group(p<0.05), accordingly, feed requirement(feed/gain) and TDN/gain increased by 15.9% and 15.5%, respectively. No significant differences were found in slaughter weight, carcass weight, dressing percentage, meat yield index and meat quality traits between two treatments. In conclusion, this study revealed that poor floor condition of feeding pen could decrease weight gain and feed efficiency of cattle by increasing energy consumption for locomotion and conductive energy loss while resting on the floor surface. These results indicates that housing orientation of cattle shed and the selection of roof material are important factors in beef cattle production.

• Science of Emotion and Sensibility
• /
• v.5 no.4
• /
• pp.51-57
• /
• 2002

The purpose of the study was to measure and compare driver's psychophysiological responses in different driving conditions through driving simulator. Twelve male adults(more than 1 year of driving experience) were assigned to four different driving conditions, such as normal speed(70㎞/h), sudden start(0㎞/h→70㎞/h), and sudden stop(70㎞/h→0㎞/h), and their simulator sickness, subjective pleasantness and arousal, EEG, ECG, skin temperature, and GSR were measured. Subjective and physiological evaluations were executed before and after driving in each condition. The results showed that subjective pleasantness and arousal increased in sudden stop and sudden start conditions, relative to stop and normal speed conditions. As the central nervous responses, beta wave increased and alpha wave decreased in sudden stop and sudden start conditions, relative to stop and normal speed conditions. With regard to the autonomic responses, heart rate and GSR increased, while skin temperature decreased in sudden stop and sudden start conditions, which means an activation of sympathetic nervous system. The results suggested that based upon observation of the distinctive psychophysiological changes by driving conditions, it is possible to evaluate the human sensibility in dynamic environment.

• Journal of Korea Water Resources Association
• /
• v.37 no.11
• /
• pp.915-927
• /
• 2004

The purpose of this paper is to estimate the instream flow of the South Han River Basin to ensure an adequate supply of suitable quality of water for preservation and enhancement of aquatic ecosystems. Proposed methods is Physical Habitant Simulation System of Instream Flow Incremental Methodology. Accurate estimation on a water depth and a velocity distribution was acquired by applying a two dimensional hydrodynamic model for a simulation of a hydraulic parameter necessary for the habitat evaluation to be used in a physical habitat simulation system. The Habitat Suitability Criteria with the application of univariate curve on zacco platypus as a representative fish was able to be established by conducting a field investigation. The establishment of a hydrological materialistic balance between upper and lower streams was confirmed by conducting a simulation simultaneously together with a mainstream section, which was excluded from the considered sections for the inhabitation evaluation of fish.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.332-332
• /
• 2011

하천 유사량 특성 분석은 하천유역 내의 수리구조물 설계 및 유지관리, 하천개수 및 하도의 안정, 홍수터 관리, 저수지 설계 및 운영 등 수자원 개발 및 관리를 위한 하천계획의 필요한 요소 중 하나이며 현장 측정에서 분석까지 정밀한 일련의 과정을 통해서 알아낼 수 있다. 본 연구에서는 6개 지점(여주, 왜관, 진동, 공주, 나주, 구례2)에 대해 유사량 특성 분석을 수행하였다. 부유사량은 강우가 집중되는 홍수기(왕복수심적분법; D-74측정장비 / 표면채취법)를 중심으로 측정하였고 하상토의 경우는 Grab Sampler(60L), 선격자법 등을 이용하여 홍수기 전 후로 2회 채취하였다. 채취된 시료는 특성에 따라 여과법(부유사농도), BW관법(부유사입도분포), 체분석법(하상토입도분포)으로 분석하였으며, 이를 통해 산정된 평균 부유사농도, Oden Curve와 입도분포곡선 및 수리량(수위, 유속, 측정수심, 수면폭, 수면경사, 수온)등의 자료를 이용하여 총유사량(Modified Einstein 방법)을 추정하였다. 본 연구 결과는 다음과 같다.: 1) 유량-부유사량 및 총유사량 관계: 유량-부유사량의 관계에 있어 대체적으로 일관된 경향성이 나타났으며 총유사량과의 관계 역시 부유사량과 비슷한 경향성을 보임. 일부 성과의 경우, 총유사량과의 관계에 있어 Modified Einstein 조건의 불충족(자갈하상재료 또는 저유속)으로 부유사량과 동일추정이거나 추정불가 및 이상치가 나타남. 2) 유량-부유사량 특성: 전체적으로 루프현상을 보이며 초기 강우 사상에서는 더 많은 유사량이 발생하는데 이는 초기 강우에 의해 유사 이송이 활발하게 이루어지는 일반적인 특성임. 또한 수위 상승-하강에 따른 부유사량 자료가 더욱더 확보된다면 수위 상승과 하강부로 구분하여 분석하는 것도 의의가 있을 것으로 판단됨. 3) 유량-유사량관계식 개발: 개발된 관계식은 총유사량이 아닌 부유사량으로 개발되었으며, 측정성과들 간의 상관계수가 0.9723(구례2 지점) ~ 0.8490(나주 지점)으로 분석됨. 또한 개발된 관계식에 대한 신뢰도 분석을 실시하지 않았기 때문에 적용 시에는 주의가 요구됨.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.549-559
• /
• 2008

This study verified the limitations of commercial GPS data processing software and the applicability on precise positioning through comparing the processing results between Bernese and TGO under various conditions. To achieve the goal, we selected three nationwide station data and two smaller local data to constitute networks. By using Bernese and TGO, those networks are processed through the baseline analysis and the network adjustment. The comparative analysis was carried out, in terms of software, baseline length and network scale, observation duration, and number of fixed points. In the comparison between softwares, the scientific software was excellent in accuracy. It was confirmed that, as GPS-related technology is developed, the performance of the receiver was enhanced. And, in parallel with this, even the functionalities of the commercial software were tremendously enhanced. The difference, however, in result between the scientific and commercial software are still exist even if it is not big. Therefore, this study confirms that the scientific software should be used when the most precise position is necessary to be computed, especially if baseline vectors are big.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.415-415
• /
• 2020

국내 농업용수 수요량 산정에 있어서 논벼 수요량은 수정 Penman (Modified Penman: MP) 방법에 의한 증발산량을 기반으로 산정하고 있으나, 최근 국제식량농업기구 (Food and Agriculture Organization of the United Nations: FAO) 및 국내 농진청 등에서는 Penman-Monteith (PM) 방법에 의한 증발산량 산정방법을 채택하고 있다. 따라서 본 연구에서는 논벼 수요량 산정에 있어 우리나라 실제 현장여건에 적합한 논벼 증발산량 산정 방법을 제안하고자 기존에 적용하고 있는 MP 방법과 최근에 국내외적으로 제안되고 있는 PM 방법에 의한 논벼 수요량 산정 결과를 실질적으로 벼 생산에 공급된 저수지 공급량 자료와 비교 분석을 통해 현장 적용성을 평가해 보았다. 이를 위해 본 연구에서는 농진청에서 PM 증발산량 작물계수를 도출한 현장실험지구를 포함하는 호남지역을 대상으로 저수지 100 만톤 이상의 한국농어촌공사 관리지역 중 농업용수 공급량 자료가 신뢰성 있는 대표지구를 선정하였다. 농업용수 실제 공급량 자료를 기반으로 두 증발산량에 의한 논벼 수요량 산정 결과를 비교 분석한 결과, MP 방법에 의한 수요량이 PM 방법에 의한 수요량 보다 높게 나타났으며, 따라서 MP 방법에 의한 수요량이 PM 방법에 의한 수요량 보다 농업용수 공급량과의 차이가 작게 나타나는 경향을 보였다. 대체적으로 강우량이 적은 지역에서 농업용수 공급량 및 논벼 수요량이 높게 나타났으며, 이러한 결과는 공급량과 수요량간의 관계에도 영향을 미쳐 강우량이 많은 지역에서 강우량이 적은 지역에 비해 농업용수 공급일수가 감소함으로써 공급량과 수요량과의 차이가 적어지는 경향을 보였다. 본 연구 결과로 농업용수 공급량을 기준으로 논벼 수요량 산정에 있어 증발산량 산정방법은 안정적인 농업용수 공급계획과 수리시설 설계에서의 이수안전도 확보차원에서 MP 방법을 채택하는 것이 더 바람직 할 것으로 사료된다. 추가적으로 논벼 수요량 산정은 증발산량 산정방법 외에도 유효우량 산정방법, 수로손실, 재배관리손실 등의 다양한 관련 인자들의 영향을 받기 때문에 증발산량 산정방법과 더불어 이들 인자들에 대해서도 종합적인 평가를 실시하여 논벼 수요량 산정 결과의 신뢰성 확보가 요구된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.52-60
• /
• 2018

In the automobile industry, in order to increase the fuel efficiency and conform to the safety regulations, it is necessary to make the vehicles as light as possible. Therefore, it is crucial to manufacture dual phase steels, complex phases steels, MS steels, TRIP steels, and TWIP from high strength steels with a tensile strength of 700Mpa or more. In order to apply ultra-high tensile strength steel to the body, the welding process is essential. Resistance spot welding, which is advantageous in terms of its cost, is used in more than 80% of cases in body welding. It is generally accepted that ultra-high tensile strength steel has poor weldability, because its alloy element content is increased to improve its strength. In the case of the resistance spot welding of ultra-high tensile steel, it has been reported that the proper welding condition area is reduced and interfacial fracture and partial interfacial fracture occur in the weld zone. Therefore, research into the welding quality judgment that can predict the defect and quality in real time is being actively conducted. In this study, the dynamic resistance of the weld was monitored using the secondary circuit process variables detected during resistance spot welding, and the factors necessary for the determination of the welding quality were extracted from the dynamic resistance pattern. The correlations between the extracted factors and the weld quality were analyzed and a regression analysis was carried out using highly correlated pendulums. Based on this research, a regression model that can be applied to the field was proposed.

• 한국가스학회:학술대회논문집
• /
• 2007.04a
• /
• pp.195-200
• /
• 2007

본 연구는 도심지에 위치한 LPG 충전소를 연구범위로 하여 공간정보의 활용이 가장 많이 요구되는 안전관리 분야의 업무를 중심으로 공간정보를 효율적으로 구축 활용하기 위하여 데이터베이스를 중심으로 위험관리정보 시스템을 개발하였다. 이를 바탕으로 정량적 위험성 평가의 자동화를 통해 나타난 위험성을 실시간에 제어하기 위한 필요조건을 표준화하여 기초 정보자료로 구축, 이를 지리정보기능과 연동하여 LPG 충전소의 안전검사의 효율화, 사전 위험성 평가, 사고대응 판단의 효과적인 의사결정을 유도 할 수 있는 기반을 제공한다. 위험관리정보시스템(RMIS, Risk Management Information System) 개발절차는 다음과 같다 첫째, 도심지에 위치한 LPG 충전소 위험성 평가를 수행함에 있어서 기본적인 데이터인 부지내(On-site) 관련 자료와 부지 외(Off-site) 관련 자료를 관계형 데이터베이스(RDB, Relational Database)로 개발하였다. 둘째, Visual Basic을 이용하여 사용자가 효과적으로 위험을 관리 제어 할 수 있는 위험관리 통합 데이터베이스 시스템 개발하였다. 셋째, 위험관리 통합 데이터베이스 시스템과 지리정보시스템에 연동을 통한 의사결정 방안 제시하였다. 위험관리정보시스템(RMIS) 프로그램을 개발을 통하여 다음과 같은 결과를 도출하였다. 첫째, 위험관리 데이터 이용하여 사용자와 검사자가 효과적으로 위험을 사전관리 할 수 있는 공유정보를 구축하였다. 둘째, 위험 관리를 부지 내와 부지 외로 나누어 관리함으로서 시설 내부 뿐 만 아니라 시설외부에 미치는 영향을 모두 고려하여 구축하므로 서, 중대사고에 대응 할 수 있는 종합적인 안전관리 기반을 조성하였다. 셋째, 사용자 인터페이스를 바탕으로 비상사태 발생시에 신속하고 정확한 의사결정을 할 수 있는 기반을 조성하였다. 제공하여 응용GIS 구축의 생산성 및 품질 향상에 기여할 뿐만 아니라 우리의 최종목표인 GIS 소프트웨어 자동 생산에도 크게 기여할 것으로 사료된다. 등)을 교통망상에 표시할 수 있음으로서 의사결정에 보다 많은 도움을 줄 수 있을 것이다. 비트율의 증가와 화질 열화는 각각 최대 1.32%와 최대 0.11dB로 무시할 수 있을 정도로 작음을 확인 하였다.을 알 수 있었다. 현지관측에 비해 막대한 비용과 시간을 절약할 수 있는 위성영상해석방법을 이용한 방법은 해양수질파악이 가능할 것으로 판단되며, GIS를 이용하여 다양하고 복잡한 자료를 데이터베이스화함으로써 가시화하고, 이를 기초로 공간분석을 실시함으로써 환경요소별 공간분포에 대한 파악을 통해 수치모형실험을 이용한 각종 환경영향의 평가 및 예측을 위한 기초자료로 이용이 가능할 것으로 사료된다.염총량관리 기본계획 시 구축된 모형 매개변수를 바탕으로 분석을 수행하였다. 일차오차분석을 이용하여 수리매개변수와 수질매개변수의 수질항목별 상대적 기여도를 파악해 본 결과, 수리매개변수는 DO, BOD, 유기질소, 유기인 모든 항목에 일정 정도의 상대적 기여도를 가지고 있는 것을 알 수 있었다. 이로부터 수질 모형의 적용 시 수리 매개변수 또한 수질 매개변수의 추정 시와 같이 보다 세심한 주의를 기울여 추정할 필요가 있을 것으로 판단된다.변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전략은 존재하므로 이러한 전략을 개발 및 활용할 수 있으며, 특히, 한국주