• Title/Summary/Keyword: 실시간 신호시스템

Search Result 1,145, Processing Time 0.027 seconds

A Covariance Analysis Using the Kalman Filterings for Interrelationships Research between Sensor Signals of the Real Time Simulator of Launch Control System in the NARO Space Center (나로우주센터 발사관제시스템 실시간 발사관제 모의장치의 센서 신호간 연관성 해석을 위한 퍼지-칼만필터 공분산 분석)

  • Hong Il-Hee;Department of Electrical Engineering Chungnam National University Yang-MoKim
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.42 no.4 s.304
    • /
    • pp.25-34
    • /
    • 2005
  • We had research to conduct interrelationships between sensors using postprocessing analysis with the Fuzzy-Kalman Filtering Auto-Correlation about Real Time Simulator data of the NaroSC LCS in case of a fully blind situation scenario. The conducted interrelations are same harmony with relations in scenario. We had analyzed signals of sensors reverse-using a optimization character of Fuzzy-Kalman Filter. As our research conclusion, We had recognized possibilities of signal processing about the KSLV-1, on-board payloads, general equipments of ground support which apply to multi sensor systems.

Implementation of Wavelet Transform for a Real time Monitoring ECG Telemetry System (웨이브렛 변환을 이용한 실시간 모니터링 ECG 텔레미트리 시스템 구현)

  • 박차훈;서희돈
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.3 no.1
    • /
    • pp.27-32
    • /
    • 2002
  • In this study, we fabricated the advanced telemetry system that transmitting media use radio frequency(RF) for the middle range measurement of the physiological signals and receiving media use optical for electromagnetic interference problem. The telemetry system within a size of 65$\times$125$\times$45mm consists of three parts: RF transmitter, optical receiver and physiological signal processing CMOS one chip. Advantages of proposed telemetry system is wireless middle range(50m) FM transmission, reduce electromagnetic interference to a minimum which enables a comfortable bed-side telemetry system. The monitoring system was designed in the structure of dual-processor for the real time processing. The use of the one channel in our study made it possible the real time wavelet transformation of electrocardiogram data of 360Hz, 16 bits for every 1.42 seconds.

  • PDF

Implementation of Signal Generation and Capture Module for Real-Time Black-Box Testing On Embedded System (임베디드 시스템의 실시간 Black-Box Testing 실행을 위한 신호 생성 및 입력 장치 제어 방법 구현)

  • Kwon, Jin-Seok;Chung, Ki-Hyeon;Choi, Kyoeng-Hee
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2009.04a
    • /
    • pp.666-669
    • /
    • 2009
  • 임베디드 시스템의 Black-Box 테스트 자동화를 위해 Test Script 기반으로 테스트를 진행하고 있는 툴이 많이 있다. Test Script 에 기술되어 있는 입력 값을 임베디드 시스템의 실제 신호로 생성하고 또 Test Script에 기술된 출력 예상 값을 검증하기 위해 임베디드 시스템의 출력 신호를 읽어 들이기 위해서 일반적으로 DAQ Board를 사용한다. 이 때 다양 한 DAQ Board 또는 다른 장치를 제어하기 Service 라는 레이어를 두어 다양한 장치에 상응하는 프로그램을 만들 수 있도록 하였다. 본 논문에서는 Test Script 실행에 있어 실시간 성을 최대한 보장하기 위해 각 Service 의 실행시간을 최소화 하는 방법에 대해 논하고자 한다. 논의를 하는데 있어 다양한 Service 중 NIDAQ Board를 이용하여 신호를 생성하고 읽어 들이는 Service가 모든 테스트에 있어 일반적으로 사용하게 되는 Service 이기에 이를 기준으로 Service의 실행 시간을 최소화 하는 방법을 구현 하였다.

Real-Time Implementation of the CS-ACELP(G.729) Using TMS320C6201 DSP (TMS320C6201를 이용한 CS-ACELP(G.729)의 실시간 구현)

  • 백성기;박만호;배건성
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.3B
    • /
    • pp.288-294
    • /
    • 2001
  • 본 논문에서는 CS-ACELP 음성부호화기를 TMS320C6201 고정소수점 DSP 칩을 탑재한 EVM 보드 상에서 권고안(G.729)과 함께 제공되는 고정수점 C 프로그램을 바탕으로 실시간 구현하였다. CS-ACELP 음성부호화기를 실시간 구현하기 위한 최적화 방법에 대해 기술하였으며, 구현된 시스템의 음질 평가를 위해서 음성신호에 대한 C 프로그램의 출력과 구현된 시스템의 출력을 비교하였다. 실험 결과, 최적화 작업을 통해 구해진 전체 프로그램 메모리의 크기는 약 14.04kWords 였으며, 한 프레임(10ms)을 처리하는데 2.5 ms가 소요되었다. 또한, 임의의 음성신호에 대한 C 프로그램의 출력과 구현된 시스템의 출력을 ITU-T에서 제공되는 test vector를 이용하여 bit-exact 함을 확인하였으며, 위의 실험결과를 바탕으로 TMS320C6201 EVM 보드에서 마이크와 스피커를 이용하여 CS-ACELP 음성부호화기가 왜곡이나 지연없이 실시간 구현됨을 확인하였다.

  • PDF

A Study on Real-time Implementing of Time-Scale Modification (음성 신호 시간축 변환의 실시간 구현에 관한 연구)

  • Han, Dong-Chul;Lee, Ki-Seung;Cha, Il-Hawan;Youn, Dae-Hee
    • The Journal of the Acoustical Society of Korea
    • /
    • v.14 no.2
    • /
    • pp.50-61
    • /
    • 1995
  • A time scale modification method yielding rate-modified speech while conserving the characteristic of speech was implemented in real-time using a goneral purpose digital signal processor. Time scale modification changed pronunciation speed only, producing a time difference between the input signal and the modified signal, making it impossible to implement it in real-time. In this thesis, a system was implemented to remove the time difference between the input and modified signals. Speech signals slowed down or speeded up by a physical time scale modification method, such as adjusting the motor speed of the cassett tape recorder, was used as the input signal. Physical modification that controled only the inter speed of the cassette tape player distorted the pitch period of the original speech. In this study, a real-time system was implemented so that the pitch-distorted speech was reconstructed back to the original by fractional sampling pitch shifting using an FIR filter, and this signal was time scale modified to match the cassette tape recorder motor speed using SOLA time-scale medification. In experiments using speech signals medifiedby the proposed method, results obtained using a 16-bit resolution ADSP2101 processor and using computer simulations employing floating point operations showed about the same average frame signal-to-noise ratio of about 20 dB.

  • PDF

A Study on the real-time Position-searching System using the Amplitude Approach Method (Amplitude Approach 방법을 이용한 신호원의 실시간 위치탐지에 관한 연구)

  • 신정록;송우영
    • Journal of the Korea Society of Computer and Information
    • /
    • v.5 no.2
    • /
    • pp.105-114
    • /
    • 2000
  • In this Paper in order to break with real-time position of signal source which have first dimension motion, the N antenna is arrayed with half-circle, the incident angle of signal source from receiving power pattern to receive at receive antenna is estimated and measured, and the system that measure horizontal moving distance of signal source is designed. Signal source is constructed by 10-20dBm transmitter power which frequency is 10.52GHz of X band, and on horizontally moving the position of signal source. validity of new method is confirmed.

  • PDF

Design of intelligent Traffic Control System using Multiprocessor Architecture (멀티 프로세서 구조를 이용한 지능형 교통신호 제어시스템 설계)

  • 한경호;정길도
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.12 no.2
    • /
    • pp.62-68
    • /
    • 1998
  • In this paper, we proposed the design of the intelligent traffic control system by using multiprocessor architecture. The inter-processor communication of the architecture is implemented by sharing the serial communication channel. In comparing the conventional traffic control system using single processor architecture, the proposed system uses multiple processors controlling the sub systems such as the signal lights, traffic measurement unit, auxiliary signal lights and peripherals. The main processor controls the communication among the processors and the communication protocol link to the central control center at remote site. The proposed architecture reduces the load and simplifies the program of each processor and enables the real time processing of the add-on features of intelligent traffic control systems. The architecture is implemented and the common channel inter-processor communications and the real time operation is experimented .experimented .

  • PDF

A Base Study on Interoperability between Smart Device and Senser, for building Real Time Cloud System Platform (실시간 클라우드 시스템 플랫폼 구축을 위한, 스마트 디바이스와 센서 간 상호 운용성 연구)

  • Ahn, Sung-geun;cho, Jeong-hun;Jung, Min-woo
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2013.11a
    • /
    • pp.501-504
    • /
    • 2013
  • Smart Device의 성능은 기존 Embedded System과는 비교가 무의미할 만큼 성장하였다. 하지만 실시간으로 외부의 다양한 데이터를 처리하기 위해서는 아직 Smart Device의 자원이 충분하지 않다. 이를 해소하기 위한 방안으로 신호의 처리와 관리는 풍부한 자원을 가진 서버에서 수행하고 스마트 기기는 신호 전달 및 처리 결과 수신의 제한적인 역할을 수행할 수 있는 Cloud System이 필요하며 덧붙여, 시스템을 다양한 계측 분야에서 유연하게 활용하기 위해 여러 종류의 신호들을 다양하게 처리해 줄 수 있는 Cloud Cluster와 이를 관리해줄 Platform의 구축이 이뤄져야한다. 본 연구는 그 중에서도 실시간성을 요하는 모델을 고려하여 Real Time Cloud System Platform의 구축을 위한 기반연구로서, Smart Device와 Senser 간의 Interoperability에 초점을 두고 Proto Type의 구현과 몇몇 세부 쟁점에 대한 실험 및 연구 분석 결과를 포함한다.

Performance Analysis of the Flight Control System for UAV using HILS System (HILS 시스템을 이용한 무인항공기 비행제어시스템의 성능분석)

  • Kim, Min-Soo;Baek, Soo-Ho;Choe, Yu-Hwan;Hong, Sung-Kyung
    • Proceedings of the KIEE Conference
    • /
    • 2005.07d
    • /
    • pp.2546-2548
    • /
    • 2005
  • 본 논문에서는 무인항공기의 비행제어시스템 개발 및 성능분석을 위한 HILS(Hardware-in-the-Loop-Simulation) 시스템의 구축을 제안한다. 제안한 HILS 시스템은 실시간 시뮬레이션 컴퓨터(dSPACE DS1005), 3축 모션테이블, 자세 센서, 지상통제장치(GCS; Ground Control Station), 비행제어컴퓨터(FCC; Flight Control Computer)로 구성된다. 실제 신호와 유사한 신호를 발생시키기 위한 실시간 시뮬레이션 컴퓨터는 dSPACE가 담당하며, 이 신호는 비행운동을 재현을 위한 3축 모션테이블을 동작시키게 된다. 모션테이블 상에 위치하는 자세센서 값과 GCS의 명령은 FCC의 입력으로 사용된다. 구현된 HILS 시스템을 이용하여 UAV의 제어알고리즘 및 자세센서 성능 검증을 수행하였다.

  • PDF

Speed Estimation by Applying Volume Weighted Average Methods in COSMOS (교통량 가중평균 방법을 적용한 COSMOS 속도 추정)

  • Lee Sang-soo;Lee Seung-hwan;Oh Young-Tae;Song Sung-ju
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.2 no.1 s.2
    • /
    • pp.63-73
    • /
    • 2003
  • COSMOS(Cycle, Offset, Split Model for Seoul), a real-time traffic adaptive signal system. estimates queue lengths on each approach on the basis of arithmetic average spot speeds calculated on loop detectors installed at each of two adjacent lanes. In this paper, A new method, a traffic volume-weighted average method, was studied and compared with the existing arithmetic average method. It was found that the relationship between the ratio of volumes of two lanes and the difference of average speed of each lane has a linear form. With field data, The two methods were applied and the proposed method shows more stable and reasonable queue estimation results.

  • PDF