• Title/Summary/Keyword: 실물

Search Result 1,321, Processing Time 0.025 seconds

Behavior Analysis of Assembling Soil Nailed Walls through Large Scaled Load Test (대형파괴재하시험을 통한 조립식 쏘일네일 벽체의 거동분석)

  • Kang, Inkyu;Kwon, Youngho;Park, Shinyoung;Ki, Minju;Kim, Hongtaek
    • Journal of the Korean GEO-environmental Society
    • /
    • v.9 no.4
    • /
    • pp.23-36
    • /
    • 2008
  • Soil nailing system can be mentioned to a method of supporting as the shear strength of in-situ soils is increased by passive inclusions. In the general soil nailing system, facing walls are used in two kind of a lattice concrete block or a cast in placed concrete wall. A case of lattice concrete blocks is used in slow slopes greater than 1(V):0.7(H). Also, a case of a cast in placed concrete wall is used in steep slopes less than 1(V):0.5(H). The cast in placed concrete walls are constructed to 30 cm thick together with a shotcrete facing. In this study, the assembling soil nailing method as a new soil nailing system will be proposed. This method is assembly construction using precast concrete panels with 20 cm thick. So, the ability of construction and the quality of facings can be improved more than a conventional soil nailing system. This method can be obtained the effects that a global slope stability increase, as precast concrete panels are immediately put on cutting face after excavating a slope. In this study, confining effects of concrete panels using the assembling soil nailing system were found out by large scaled load tests. In the tests, the load-settlement relationship to an assembling soil nailing system due to the stiff facings as concrete panels appeared to be better than a typical soil nailing system with shotcrete facings.

  • PDF

A Study on the Development of Children's Clothing Design as a Cultural Korean Wave Product -Focusing on the Production Work (한류 문화상품으로써의 아동복 디자인 개발에 관한 연구 -작품 제작을 중심으로)

  • Byun, Mi-Yeon;Baek, Min-Sook
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.16 no.11
    • /
    • pp.7485-7493
    • /
    • 2015
  • With the popularity of Korean Wave, making cultural goods specific for Hallyu tourists is getting more important. However, there are mainly daily life goods using celebrity character-based ones. Remarkably, there are only a few cultural goods especially in practicality-based clothing category. In particular, few cultural goods related to children's wear have been developed. Therefore, if children's wear is developed as Korean Wave cultural goods considering Chinese consumers' pattern and Korean Wave cultural goods, it will be helpful for revitalizing the Korean Wave and Korea's fashion market. In this regard, the purpose of this study is to develop children's wear design as Korean Wave cultural goods, thereby presenting empirical research results and fulfilling its following objectives: First, it is to identify the concept of Korean Wave cultural goods, to analyze the current status to finally establish data to develop Korean Wave cultural goods needed at this time. Second, it is to make real-life size works through development of designs to provide the empirical data for Korean Wave cultural goods market. For the research method and contents the review of the previous research, in-depth interview for qualitative research, and empirical research using market research and development of work were performed. Through the final research outcomes, Korean Wave cultural goods, the children's wear that can meet the consumer's needs were presented as empirical data. The study can be used as basic data for domestic fashion market and cultural product market and it is meaningful as a reference for the analysis on the Chinese consumers' needs.

An Experiment of Structural Performance of Expansion Joint with Rotation Finger (가변형 핑거 조인트를 가지는 신축이음장치의 구조 성능 실험)

  • Yoo, Sung won
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.22 no.6
    • /
    • pp.170-175
    • /
    • 2018
  • For the seismic performance, it is necessary to prevent the destruction of the expansion joint device due to the appropriate deformation of the expansion joint device due to the seismic force. Recently, the hinge is installed on the fingering of the expansion joint device in Korea, New products are being developed. In this paper, we have experimentally evaluated the real scale resistance of the expansion joints with rotational finger joints against load at right angle to the bridge axis. Experimental results show that the maximum horizontal displacement is about 21.1mm for conventional stretch joints and 51.00mm for seismic stretch joints. It is presumed that the existing expansion joint test specimen is resistant to the load in a direction perpendicular to the throat axis, and then the bending and shear deformation of the finger are excessively generated and the fracture phenomenon is likely to occur. On the other hand, in the case of the seismic expansion joint, the deformation of the load due to the load is absorbed by the hinge of the finger with respect to the load in the direction perpendicular to the throat, so that only horizontal deformation in the direction of load action.

Volatility of Urban Housing Market and Real Estate Policy after the IMF crisis (도시 주택시장의 변동성과 부동산 정책의 한계 : IMF 위기 이후 서울을 중심으로)

  • Choi, Byung-Doo
    • Journal of the Korean association of regional geographers
    • /
    • v.15 no.1
    • /
    • pp.138-160
    • /
    • 2009
  • The urban housing market in Korea, especially in Seoul and the Capital region, has been revitalized with massive urban (re)developments and expanding real estate finance after the IMF crisis. This brought about a boom of housing price during the mid-2000s, which has been virtually stabilized by strong regulation policies of the previous government. But with impacts of the recent international financial crisis together with some inherent problems, the housing market of Korea faces with a worry of collapse in relation with the financial market volatility and the serious depression of real economy, and hence the current government attempts to implement strong deregulation policies on the housing market. In this paper it is argued that this kind of volatility of urban housing market seems to be caused by strategies of capital which involve continuous massive urban (re)development, residential segregation and appropriation of monopoly rent(or capital gain), and fictitious capitalization of real estates and integration of real estate market and financial market. In these reasons, the current tendency of urban housing price shows a slow downward, which seems to give the current neoliberal government a rationale for deregulation policies to prevent the downward tendency. But this paper suggests that such a slow downward of housing price shift would have positive effects on the housing market in particular and social and economic situations in general, and hence an alternative housing policy is required to realize such positive effects.

  • PDF

Experimental Study on the Precast Concrete Joint using Re-bar Debonding and Cutting Technique (철근 비부착 및 절단 기법을 사용한 PC 접합부의 실험적 연구)

  • Yi, Waon-Ho;Moon, Jung-Ho;Lee, Yong-Jae;Lee, Han-Jun
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.2 no.4 s.7
    • /
    • pp.131-141
    • /
    • 2002
  • Precast concrete (PC) panels are often used as retaining walls to support soil pressure. In such a case, the panels should be connected at the location where PC panels meet with a buttress. However, it is not easy to provide enough development length for the reinforcing steels due to the limited width of the buttress. If it happens, the width of buttress should be increased as large enough although it is not desirable. The critical section required for providing the development length is always located where the flexural moment is maximum. Thus it is the place the buttress width ends. Also it is the place that the reinforcing steels stressed to maximum. However, it is possible to make differentiate between the maximum moment location and the most stressed location of reinforcing steels. It means that the most stressed location of reinforcing steels, the critical section, can be moved to the other place where the moment is not maximum. New critical location will have less moment than that of buttress width ends. In consequence, the development length would be longer than that of the typical way of construction. Debonding or cutting technique make it possible to reduce the moment strength of a section. Therefore reinforcing steels are debonded or cut to have a desired flexural strength at a desired place. In this study, five test specimens in full scale were erected to examine the effects of critical section movement in PC panel joints. Test parameters were the length variations of debonded and cut reinforcing steels. The test results showed that the debonding or cutting technique could be used to lengthen the development length in the joint of PC panels.

Improvement of Performance for Online Certificate Status Validation (실시간 인증서 상태검증의 성능개선)

  • Jung, Jai-Dong;Oh, Hae-Seok
    • The KIPS Transactions:PartC
    • /
    • v.10C no.4
    • /
    • pp.433-440
    • /
    • 2003
  • According as the real economic activities are carried out in the cyber world and the identity problem of a trade counterpart emerges, digital signature has been diffused. Due to the weakness for real-time validation using the validation method of digital signature, Certificate Revocation List, On-line Certificate Status Protocol was introduced. In this case, every transaction workload requested to verify digital signature is concentrated of a validation server node. Currently this method has been utilized on domestic financial transactions, but sooner or later the limitation will be revealed. In this paper, the validation method will be introduced which not only it can guarantee real-time validation but also the requesting node of certificate validation can maintain real-time certificate status information. This method makes the revocation management node update the certificate status information in real-time to the validation node while revoking certificate. The characteristic of this method is that the revocation management node should memorize the validation nodes which a certificate holder uses. If a certificate holder connects a validation node for the first time, the validation node should request its certificate status information to the above revocation management node and the revocation management node memorizes the validation node at the time. After that, the revocation management node inform the revocation information in real-time to all the validation node registered when a request of revocation happens. The benefits of this method are the fact that we can reduce the validation time because the certificate validation can be completed at the validation node and that we can avoid the concentration of requesting certificate status information to a revocation node.

A Study on the Construction Performance of Curtain Wall Systems Using Fire-Resistant & Light-Weight Inorganic Composite Foam Board (내화성 경량 무기 발포보드를 이용한 커튼월 시스템의 시공성능에 관한 연구)

  • Koo, Young-Ah;Kim, Seong-Eun;Oh, Chang-Won
    • Journal of the Korea Institute of Building Construction
    • /
    • v.14 no.2
    • /
    • pp.127-134
    • /
    • 2014
  • This study had the goal of analyzing the economic feasibility and constructability of a fire resistant curtain wall system using Light-weight Inorganic Composite Foam Board(LI-CFB). LI-CFBs, new materials with excellent fire resistance are being developed for use as the back panel of curtain wall and their fire resistance has already been analyzed through actual tests in earlier studies. In this study, a mock-up test involving the installation of the fire resistant curtain wall system on an actual building was conducted, and the system was compared with a common curtain wall system. This system is applied in the same way as a common curtain wall system. But the cutting LI-CFBs, which are brought from a factory, are used in the system and attached on the frame (mullion and transom). Even though the system requires more working time than the existing system, the LI-CFBs back panels are easy to cut and do not produce dust. Also, the panels are able to be assured the quality by checking damaged parts easily. Besides having a high level of fire resistance, the system's economic feasibility and constructability meets or exceeds those of the existing system.

Cyclic Testing of Bracket and WUF-B Type Weak-Axis Steel Moment Connections (브라켓 및 WUF-B 형식 철골모멘트골조 약축접합부 내진성능평가)

  • Lee, Kang Min;Jeong, Hee Taek;Yoon, Seok Ryong;Lee, Eun Mo;Oh, Kyung Hwan
    • Journal of Korean Society of Steel Construction
    • /
    • v.20 no.4
    • /
    • pp.483-491
    • /
    • 2008
  • There has been much focus on the strong axis steel moment connections after the Northridge earthquake in 1994. However, research studieson the seismic behavior of weak axis moment connections could be hardly found despite the fact that these connection details have been frequently used as seismic details of MRF in Korea. Therefore, the objective of this research is to provide better knowledge on the seismic behavior of weak-axis steel moment connections, which can be widely applicable to many structures with similar characteristics. For this purpose, an experimental program was designed and performed with twotypes of weak-axis steel moment connections, namely the bracket type and WUF-B type, based on the survey of existing field data and literatures. Using the experimental results obtained from the quasi-static cyclic testing of these specimens, structural performances of the joints such as hysteretic curves, maximum strength capacities and the strain of reinforced bars were investigated. From the test results, the bracket-type connection was shown to have more than a 5% story drift capacity, compared with the WUF-B type connection's 4%. These specimens were also shown to have higher strength capacities than the nominal design strength. The bracket-type connection showed a slow strength degradation after maximum strength was researched. However,the WUF-B type connection showed a rapid strength degradation that caused brittle behavior.

The Effects of Technological Progress on Growth, Employment and Distribution (성장 ${\cdot}$ 고용 ${\cdot}$ 분배에 대한 기술진보의 파급효과)

  • Im, Yang-Taek
    • Proceedings of the Technology Innovation Conference
    • /
    • 2005.02a
    • /
    • pp.220-267
    • /
    • 2005
  • 본 연구의 분석목표는 순요소증가형 CES 생산함수를 실증적으로 추정함으로써 한국 제조업부문의 기술변화의 유형을 규명하고 성장 ${\cdot}$ 고용 ${\cdot}$ 분배에 대한 기술진보의 파급효과를 분석하는 것이다. 이 분석결과를 토대로 하여, 본 연구는 성장 ${\cdot}$ 고용 ${\cdot}$ 분배를 동시적으로 추구할 수 있는 정책방향을 기술경제 패러다임의 시각에서 제시하였다. 본 연구의 실증적 분석결과는 다음과 같이 요약할 수 있다 : 한국 제조업부문의 기술변화의 유형은 Hicks형 비(非)중립적인 자본사용적(B(t)>0) 즉 노동절약적 기술진보인 것으로 추정되었다. 이 결과, 잠재적 고용수준은 감소될 수밖에 없었다. 또한, Hicks형 중립적 기술진보를 나타내는 총요소생산성 증가율(${\gamma}$)은 감소하였던 반면에, 비(非)중립적 기술진보를 나타내는 요소간 대체탄력도(${\sigma}$)와 자본집약도(${\delta}$)는 증가하였다. 이에 따라 노동(L)이 자본(K)으로 광범위하게 대체되었을 뿐만 아니라, 자본투입(K)이 노동투입(L)보다 상대적으로 더 빠르게 증가 (K/K > L/L 즉 k/k > 0)되었다. 이 결과, 소득분배구조가 악화 (S/S< 0)된 것으로 추정되었다. 그러므로, 오늘날 경제성장의 한계 봉착, 대량실업의 폭발, 계층간 갈등의 심화를 초래한 요인은, 성장 ${\cdot}$ 고용 ${\cdot}$ 분배를 동시적으로 추구하는 산업 ${\cdot}$ 기술경제정책을 일관성있게, 또한 과감히 추진하지 않았던 결과, 노동사용적 중소기업의 몰락, 노동의 생산효율성 증진을 위한 인적자본 투자의 미흡, 자본의 생산효율성 증진을 위한 자본절약적 기술진보의 저조, 총요소 생산성 증가의 부진, 만성적인 인플레이션에 의한 실질 임금수준의 하락 및 실물 자산가치의 상승 등이라고 말할 수 있다. 따라서 성장 ${\cdot}$ 고용 ${\cdot}$ 분배의 조화는 바로 노동효율 증가형 기순혁신이며, 이를 위한 인적자본에의 투자라고 말할 수 있다. 본 연구가 기술경제 패러다임(techno-economic paradigm)의 시각에서 제시하는 한국경제의 성장 ${\cdot}$ 고용 ${\cdot}$ 분배를 위한 정책방향은 다음과 같은 동태적발전과정으로 요약할 수 있다 : 기초과학연구능력 확충 ${\rightarrow}$ 소화 ${\cdot}$ 흡수 ${\cdot}$ 개량 ${\rightarrow}$ 토착화 능력의 배양 ${\rightarrow}$ 자체기술개발, 선진기술 도입, 산업간 및 산업내 기술확산, 국제기술협력 ${\rightarrow}$ 기술혁신의 촉진 ${\rightarrow}$ 총요소생산성과 기업경쟁력(자원 및 역량, 프로세스 경쟁력, 품질경쟁력, 시장경쟁력, 고객성과, 시장성과, 재무성과)의 제고 ${\rightarrow}$ 가격경쟁력(임금, 금리, 물류비용, 환율 등)과 비(非)가격경쟁력(디자인, 에프터서비스, 품질, 운송 등)의 제고 ${\rightarrow}$ 국가경쟁력의 제고 ${\rightarrow}$ 국제수지 흑자 ${\rightarrow}$ 성장 ${\rightarrow}$ 물가 및 고용 안정 ${\rightarrow}$ 분배 ${\rightarrow}$ 최대다수의 최대행복이다.

  • PDF

The Effect of IT Service Outsourcing Project Risks on the Intention of Purchasing Real Options based on Transaction Cost Theory (IT서비스 아웃소싱 프로젝트 위험과 실물옵션 유형간 적합성에 관한 연구)

  • Nam, SeungHyeon;Ahn, JoongHo;Yang, Hee-Dong
    • Asia pacific journal of information systems
    • /
    • v.23 no.2
    • /
    • pp.41-66
    • /
    • 2013
  • IS outsourcing has an important meaning to the Korean SME's (Small and Medium Enterprises) which want to use the IS Services. The objective of this research is to manage IT risks occurred during IS outsourcing project process. This study tries to identify these risks using real option methodology. In order to perform this objective, this study set up the research model which is composed of two main concepts. The first one is the risk factors occurred during IS outsourcing project process: User's Risks, Supplier's Risks and Transaction's Risks. All of these risks are based on Transaction Cost Theory. The second one is the intention to get (or buy) Real Options to manage the risks. In the research model, two types of real option are included: option to abandon (put option) and option to defer (call option). This study uses questionnaires and statistics methodology (PLS) to analyze the hypotheses proposed in the research model. Compared with prior studies, this study is different in two ways. First, this study restricts the range of IT risks. Prior researches of IT Risk management in MIS area cover various range of IT risks, but this study focuses on the Korean SME's IT outsourcing risks on the basis of Transaction Cost Theory. This study tests the relationship between the risks and real option types. Second, this study tries to test the moderating effect of user's risks and supplier's risks on the relationship between transaction's risks and real option types. In IT outsourcing research area, almost studies focus on the direct relationships between IT risks and outsourcing success. But in reality, the co-relationship among IT risks may occur. There are some findings according to the research analysis. First, risks related with user's risks have strong causal relationships with the intention to get option to abandon (put) and option to defer. But risks related with supplier's risks have causal relationships only with option to abandon (put). Second, user's risks and supplier's risks have no moderating effect on the relationship between transaction's risks and real option types. According to the research results, this research have some important and interesting implications on the IS outsourcing business area. First, this study identifies the effective types of real option to minimize the risks occurred during the IT outsourcing projects. So IS outsourcing service users can manage (or minimize) effectively the risks, which occurred during outsourcing projects, using real options. Second, real option gives benefits to suppliers and users at the same time (i.e., win-win strategies between IS outsourcing service providers and users). Vendors (:IS outsourcing service providers) can offer users the real options which can minimize the occurrence of risks in time. "IN TIME" means that before the IS outsourcing project starts, vendors can offer users the opportunity to buy real options in appropriate prices to manage the possibility of the risks of IS outsourcing project. And users also have chance to minimize the IT outsourcing risks occurred during the project process using real options.

  • PDF