• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.4
• /
• pp.239-248
• /
• 2017

It is important to understand the dispersion and deposition characteristics of particles in the flow around a circular cylinder. The rotation of a cylinder is considered as a means to modify the particle deposition in this study. We numerically investigate the effects of the rotational speed of a cylinder and the particle Stokes number on particle dispersion and deposition as well as flow characteristics. Results show that the deposition efficiency of small particles (with the Stokes number smaller than 4) decreases significantly as the rotational speed increases. However, when the Stokes number is larger than 4, the deposition efficiency increases slightly with the rotational speed of the cylinder. Meanwhile, for a given rotational speed, the increase in the Stokes number leads to an increase in deposition efficiency and deposited area.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.12
• /
• pp.999-1008
• /
• 2014

In this study, we consider the heat transfer characteristics of channel flow in the presence of an infinite streamwise array of equispaced identical rotating circular cylinders. This flow configuration can be regarded as a model representing a micro channel or an internal heat exchanger with cylindrical vortex generators. A numerical parametric study has been carried out by varying Reynolds number based on the bulk mean velocity and the cylinder diameter, and the gap between the cylinders and the channel wall for some selected angular speeds. The presence of the rotating circular cylinders arranged periodically in the streamwise direction causes a significant topological change of the flow, leading to heat transfer enhancement on the channel walls. More quantitative results as well as qualitative physical explanations are presented to justify the effectiveness of varying the gap to enhance heat transfer from the channel walls.

• Journal of the Korean Institute of Gas
• /
• v.26 no.1
• /
• pp.34-40
• /
• 2022

Gas cylinder cabinets have risks such as cylinder explosion and scattering of debris when a fire occurs. These risks are likely to cause gas spills and cause secondary damage. In order to reduce damage, it is very important to secure the fire resistance performance of the gas cylinder cabinet. In foreign countries, NFPA codes in the United States and EN-14470-2 in Europe stipulate fire resistance test standards for gas cylinder cabinets to protect internal cylinders for a certain period of time in a situation where gas cylinder cabinets are exposed to flames. However, in Korea, only internal pressure performance and airtight performance standards are specified, and the target is limited to piping, and research and regulations for the fire resistance performance of gas cylinder cabinets are insufficient compared to overseas. Therefore, in this study, finite element analysis was used to establish fire resistance standards for domestic gas cylinder cabinets. In the event of a fire, optimal conditions are derived in terms of structure and material.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.1
• /
• pp.71-76
• /
• 2002

Because the driving time is increased under the low speed by rapidly increasing of vehicles, this paper is presented a new ignition control system for improvement the fuel economy, which only some of cylinders are using under the idle status or low speed and preserving the engine rpm. is applicable to effective in fuel economy. An actual hardware was made to prove this new control system. The developed variable cylinder engine concentrated the heat neat the cylinders in idle status or low speed, so there was a problem in re-ignition. It was the reason of a lot of exhaust gas, high fuel consumption and instability of engine revolution. In this paper, in order to solve above problem to show the improvement fuel economy using the new ignition control system and valve opening period at idle status of low speed.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.3
• /
• pp.117-120
• /
• 2014

In general a main technology of control a sluice gate is accurate synchronous position control for the two cylinders when they are moving with the sluice gate together over 10[m]. Because the nonlinear friction and the unconstant supply flow. Cylinders' displacement will be different. In this case the sluice gate may be deformed and abraded, and even the sluice gate may unable to work. In order to design the controller for this system, we designed two kinds of Fuzzy PI controllers. Fuzzy PI position controller and Fuzzy PI synchronous controller have been designed. We show some simulation results for its availability.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.614-618
• /
• 2014

본 연구에서는 디퓨저의 압력회복을 높이기 위해 디퓨저 입구에 실린더를 설치하여 후류가 압력회복에 어떤 영향을 미치는지 알아보았다. 2D-Incomp-2.1-P 해석자를 이용하여 속도, 압력에 따른 유동가시화를 통해 내부유동을 분석하였고, 압력회복계수를 비교하여 디퓨저 입구에 설치된 실린더의 후류가 디퓨저 성능에 어떤 영향을 주는지 비교하였다. 그결과 실린더를 설치하였을 때 확대부에서의 박리영역이 더 작아졌고 압력회복계수가 더 높아졌다.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.580-584
• /
• 2015

수중 식생, 해양 구조물과 같은 복합 구조에 대하여 본 연구에서는 각각의 구조물을 원형 실린더로 가정하고, 구조물 다발 하나를 원형 실린더 패치로 가정하였다. 패치들의 배열을 계산할시 기존의 방법으로는 많은 격자가 필요하기 때문에 좀 더 효율적으로 외력의 특성을 파악할 방법을 살펴보았다. 계산 영역 내에서 평균화된 정보들을 통해서 이용하여 항력계수와 양력계수와 속도, 압력의 관계를 알아내는 모델링 방법을 해보았다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.212-216
• /
• 2002

평행한 벽 내부의 흐르는 규제 속에 원형실린더를 놓고 운동장 해석을 수행하였다. 비압축성 Navier- Stokes 방정식을 풀었고 3차 풍상미분의 수치해법을 이용하였다. 채널 내부에서 실린더의 위치를 이동하면서 벽면의 효과 전단력, 와류의 현장을 규명하였다. 수치처리는 Marker & Cell 기법에 의한 유한차분법을 사용하였다. 본 연구를 통하여 실린더와 벽 경계 사이에서의 생성된 와가 박리 전단에 영향을 미치는 것을 알 수 있었다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1993.07a
• /
• pp.82-85
• /
• 1993

해양구조물에 가장 이상적인 구조물의 형태중의 하나는 원형실린더인데, 그것은 같은 재질일 경우 단위무게당 가장 큰 힘을 지지할 수 있는 단면을 가지고 있고 또한 어느 방향으로의 외력에 대해서도 비교적 간단하게 해석할 수 있는 형상을 가지고 있다. 송유관 등의 목적으로 원형실린더를 해저에 설치함으로써 파이프라인이 형성되고, 공학적으로 볼 때 이에 대한 해석은 바닥경계를 고려하여 수평실린더에 작용하는 힘을 구하는 것으로 귀착된다고 할 수 있다. (중략)

• Composites Research
• /
• v.24 no.2
• /
• pp.22-29
• /
• 2011

To increase the performance of thick-walled cylinders recently their length is continually enlarged. For that reason it is important to reduce weight of the thick-walled cylinders. In this paper the FE models to predict and estimate effects on the composite tapes were created with MSC.Nastran/Patran v.2005. First of all a autofrettage method was applied to the 2D model of the AISI4340 cylinder reduced the thick. And then the comparison of the numerical results with analysis results showed and verified by using T300/5208, IM7/PETI5, IM7/8552 tapes. Those are predicted to the effects of the angle of the composite tapes and elastic modulus according to the composite properties.