• New Physics: Sae Mulli
• /
• v.68 no.11
• /
• pp.1203-1207
• /
• 2018

In this study, silica nanowires were formed using silicon oxide films with different oxygen contents, and their microstructure and physical properties were compared with those of silica nanowires formed using Si wafers. The silicon oxide films were fabricated by using a plasma-enhanced chemical vapor deposition method. Silica nanowires were formed by thermally annealing silicon oxide films coated with nickel films as a catalyst. In the case of silicon oxide films having an oxygen content of approximately 50 at.% or less, the formation mechanism, microstructure, and physical properties of the nanowires were not substantially different from those of the silicon wafer. In particular, the uniformity of the thickness showed better behavior in the silicon oxide films. These results imply that silicon oxide films can be used as an alternative for fabricating high-quality silica nanowires at low cost.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.55-55
• /
• 2011

실리카 지지체 위에 은 (silver) 나노 입자를 부착시키는 방법으로는 지지체 표면을 먼저 은입자와 친화성이 큰 amino(-NH2), mercapto(-SH), cyan(-CN) 등의 관능기로 표면처리 하는 방법이 일반적으로 사용된다. 구체적으로 설명하면 첫 단계로 지지체인 실리카입자의 표면을 아민으로 표면 처리 한다. 실리카 입자위에 부착된 아민관능기는 입자 생성의 단계에서 은 (silver) 나노 입자가 붙는 접촉점의 역할과 핵 생성 장소로서의 역할을 하게되고, 아민 관능기의 이런 역할로 실리카 입자 표면에 부착된 핵이 생장하여 입자가 됨으로써 최종적으로 은(silver) 나노 입자가 실리카 지지체위에 부착된 형태의 나노복합체가 형성된다. 분자량이 다른 PVP를 사용하여 제조한, NH2와 SH로 계면처리 된 은-실리카 나노복합체제조를 시도하였다. 사용되는 PVP의 분자량이 증가함에 따라 긴 고분자 사슬에 의하여 생성된 입체장애가 증가하게 되어, 은 핵의 성장에 대한 물리적 장벽이 증가하게 된다. 그러므로 고정화된 은 입자의 크기가 감소하게 된다. 이러한 형상은 NH2기 또는 SH기로 계면 처리된 실리카를 이용하여 제조된 은-실리카 나노복합체 입자들에서 모두 관찰되지만, SH기로 계면처리된 실리카를 사용할 경우 고정화된 은 입자의 수가 더욱 많고, 크기 역시 더욱 균일함을 알 수 있다.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.514-521
• /
• 2010

A new one-shot process was employed to fabricate proton exchange membranes (PEMs) over conventional solvent-casting process. Here, PEMs containing nano-dispersed silica nanoparticles were fabricated using one-shot process similar to the bulk-molding compounds (BMC). Different components such as reactive dispersant, urethane acrylate nonionmer (UAN), styrene, styrene sulfuric acid and silica nano particles were dissolved in a single solvent dimethyl sulfoxide (DMSO) followed by copolymerization within a mold in the presence of radical initiator. We have successfully studied the water-swelling and proton conductivity of obtained nanocomposite membranes which are strongly depended on the surface property of dispersed silica nano particles. In case of dispersion of hydrophilic silica nanoparticles, the nanocomposite membranes exhibited an increase in water-swelling and a decrease in methanol permeability with almost unchanged proton conductivity compared to neat polymeric membrane. The reverse observations were achieved for hydrophobic silica nanoparticles. Hence, hydrophilic and hydrophobic silica nanoparticles were effectively dispersed in hydrophilic and hydrophobic medium respectively. Hydrophobic silica nanoparticles dispersed in hydrophobic domains of PEMs largely suppressed swelling of hydrophilic domains by absorbing water without interrupting proton conduction occurred in hydrophilic membrane. Consequently, proton conductivity and water-swelling could be freely controlled by simply dispersing silica nanopartilces within the membrane.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.407-413
• /
• 2022

This study demonstrates a method for synthesis of amine functionalized and easily size controllable silica nanoparticles through biomimetic polyamine complex. First, we generate a polyamine nanocomplex composed of polyallylamine hydrochloride (PAH) and phosphate ion (pi) to synthesize silica nanoparticles. The size of polyamine nanocomplex is reversibly adjusted within the range of about 50 to 300 nm according to the pH conditions. Amine groups of the PAH in the nanocomplex catalyzes the condensation reaction of silicic acid. As a results, silica nanoparticles are synthesized based on nanocomplex in a very short time. Finally, we synthesize silica nanoparticles with various sizes according to the pH conditions. In the process of synthesizing silica nanoparticles, polyamine chains that act as catalysts are incorporated into the inside and surface of the particles, subsequently, amine groups are exposed on the surface of silica nanoparticles. As a results, the synthesis and surface modification of silica nanoparticles are performed simultaneously, and the silica nanoparticles introduced with amine groups can be easily synthesized by adjusting the sizes of the silica nanoparticles. Finally, we demonstrate the synthesis of functional silica nanoparticles in a short time under milder conditions than the conventional synthetic method. Furthermore, this method can be applicable to bioengineering and materials fields.

• Resources Recycling
• /
• v.16 no.5
• /
• pp.41-45
• /
• 2007

Tetramethylorthosilicate (TMOS) and silica nanopowder were synthesized from the waste silicon sludge containing 15% weight of silicon powder. TMOS, a precursor of silica nanopowder, was firstly prepared from the waste silicon sludge by catalytic chemical reaction. The maximum recovery of the TMOS was 100% after 5 hrs regardless of reaction temperature above $130^{\circ}C$. But the initial reaction rate became faster while the reaction temperature was higher than $150^{\circ}C$. As the methanol feedrate Increased from 0.8 ml/min to 1.4 ml/min, the yield of reaction was not varied after 3 hrs. Then, silica nanopowder was synthesized from the synthesized TMOS by flame spray pyrolysis. The morphology of as-prepared silica nanopowder was spherical and non-aggregated. The average particle diameters ranged from 9 nm to 30 nm and were in proportional to the precursor feed rate, and precursor concentration.

• Journal of the Korean Vacuum Society
• /
• v.22 no.6
• /
• pp.298-305
• /
• 2013

Uniform silica nanobeads were synthesized by St$\ddot{o}$ber method and assembled in the form of monolayer on glass substrate using sonication method. Before the assembly of silica nanobeads, glass substrates were treated with molecular linkers, such as CP-TMS and PEI, and nanobeads were dispersed in toluene. In attachment test, SO (sonication without stacking) method and SS (sonnication with stacking) method was used and sonication time was controled. After the experiment, microbalance was use to measure deviation between before and after the attachment experiment then calculate percent of coverage. Minutely observe with SEM (Scanning Electron Microscopy) then select the most close-packed and monolayer assembled cover glass and calculate DOC (Degree of Coverage). In SO method, DOC increased very sharply and reach over 140 percent point, also got lots of multi-layer region. On the other hand, in SS method DOC increased slower than SO method but more close-packed and monolayer assembled.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.13.1-13.1
• /
• 2009

에어로젤은 인류가 개발한 소재 중에서 가장 가벼운 고체로, 기공률이 90%이상이고 비표면적은 ~1000m2/g, 기공의 크기는 10nm 크기로 이루어진 나노기공 물질이다. 1931년에 Kisley가 물유리로부터 실리카 에어로젤을 합성한 이래로 실리카 에어로젤에 대한 연구가 가장 많이 이루어져왔으며, 단열소재, 흡음재, 체렌코프우주선 디텍터, 반도체의 초저유전소재, 유출된 석유의 정제, 촉매 등에 대한 응용에 대해서도 연구가 많이 이루어져 왔다. 그리고TiO2와 같은 광촉매 에어로젤 소재, 카본 에어로젤 소재등 다양한 나노기공 소재에 대해서도 연구가 이루어지고 있으며, 카본 에어로젤의 경우 나노기공과 비표면적을이용한 전기이중층 커패시터 (EDLC)에 대한 연구도 이루어지고 이다. 본 연구에서는 첫째로, 실리카 에어로젤에 대한 연구결과를 소개하고 이의 단열소재로서의 응용가능성에대하여 언급하고자 한다. 실리카 에어로젤 나노기공 소재의 경우, 기공크기가 10nm크기로 매우 작고 공기의 자유이동길이와 거의 비슷하여서 대류에 의한 열전달을 낮출 수 있으며, 낮은 고체함량으로 인하여 포논에 의한 열전달을 낮출 수 있기 때문에 단열소재로서 최고의 성능을 나타낸다. 하지만, 문제는 높은 기공률로 인한 기계적인 취약성이 문제이다. 따라서 이를 보완하기 위항 섬유로 에어로젤을 보강할 수 있는데, 이를통하여 에어로젤 나노기공소재와 섬유보강에 의한 복합화에 대하여 말하고자 한다. 또 다른 하나의 연구방법은유기-무기 하이브리드 나노기공 소재를 합성하는 것이다. 여기서는하나의 방법으로 MTEOS-TEOS의 하이브리드화와 초임계 건조공정에 의한 나노기공 소재에 대한 연구결과를소개하고자 한다. 마지막으로 카본 에어로젤 나노기공소재의 합성과 나노기공 구조의 제어 및 물성평가에 대한 것을 말하고자하는데, 본 발표에서는 레소시놀과 포름알데히드를 촉매에 의한 중합반응을 통하여 유기 에어로젤 소재를 합성하고 분위기에서탄소화 공정을 통하여 카본에어로젤을 합성하였다. 또한 금속 니켈을 도입하는 것에 의하여 탄소/니켈 복합 하이브리드 에어로젤 소재를 합성하고 슈퍼커패시터 전기화학 특성에 대한 연구결과를 발표하고자 한다.

• Membrane Journal
• /
• v.24 no.4
• /
• pp.301-310
• /
• 2014

In this study, the silica nanoparticles were considerably chosen to improve a dimensional stability, proton transport and electrochemical performance of the resulting inorganic-organic nanocomposite membranes. For this purpose, hydrophobic silica (Aerosil$^{(R)}$ 812, Degussa) and hydrophilic silica (Aerosil$^{(R)}$ 380, Degussa) nanoparticles were, respectively, introduced into a Sulfonated poly(arylene ether sulfone) (SPAES) polymer matrix. The $SiO_2$ particles are evenly dispersed in a SPAES matrix by the aid of a non-ionic surfactant (Pluronics$^{(R)}$ L64). A $SiO_2$ content plays an important role in membrane microstructures and membrane properties such as proton conductivity and water uptake. Therefore, to study nanocomposite membranes with excessive amount of silica, the content of silica nanoparticles were increased up to 5 wt%. Interestingly, a hydrophobic $SiO_2$ containing nanocomposite membrane showed better electrochemical performance (29% higher than pristine SPAES) despite of low proton conductivity due to its adhesive properties with a catalyst layer in a single cell test. All the silica-SPAES membranes exhibited better performance than a pristine SPAES membrane.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.1
• /
• pp.21-29
• /
• 2024

In this study, EMC(Epoxy molding compound) waste from the semiconductor molding process is recycled and synthesized into silica nanoparticles, which are then applied as abrasive materials contains CMP(Chemical mechanical polishing) slurry. Specifically, silanol precursor is extracted from EMC waste according to the ultra-sonication method, which provides heat and energy, using ammonia solution as an etchant. By employing as-extracted silanol via a facile sol-gel process, uniform silica nanoparticles(e-SiO₂, experimentally synthesized SiO₂) with a size of ca. 100nm are successfully synthesized. Through physical and chemical analysis, it was confirmed that e-SiO₂ has similar properties compared to commercially available SiO₂(c-SiO₂, commercially SiO₂). For practical CMP applications, CMP slurry is prepared using e-SiO₂ as an abrasive and tested by polishing a semiconductor chip. As a result, the scratches that are roughly on the surface of the chip are successfully removed and turned into a smooth surface. Hence, the results present a recycling method of EMC waste into silica nanoparticles and the application to high-quality CMP slurry for the polishing process in semiconductor packaging.

• Composites Research
• /
• v.33 no.5
• /
• pp.268-274
• /
• 2020

This paper analyzed the degradation behaviors of silica nano epoxy composite based on the isoconversional method. The size of the silica nano particle was about 12 nm and the particles were mixed by three different weight ratios to make the degradation test samples. The thermogravimetric analyses were performed under six different temperature increase rates to measure the weight changes. Four different methods, Friedman, Flynn-Wall-Ozawa, Kissinger and DAEM (Distributed Activation Energy Method), were employed to calculate the activation energies depending on the conversion ratios, and their calculation results were compared. The results represented that the activation energy was increased when the silica nano particles were mixed up to 10%, indicating the definite contribution of the particles to the degradation behavior enhancements. However, the enhancement was not proportional to the particle mixture ratio by demonstrating the similar activation energies between 10% and 18% samples. The calculation results by the different methods were also compared and discussed.