• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.99-106
• /
• 2011

Experiments of Cone calorimeter test and Lift spread flame apparatus test are carried out in order to appraise fire hazard in color nonwoven used mostly on the spot in construction works. As the result, in color nonwoven combustibility is discovered not firing flame in surface, but firing under state of combustible gas occuring in the state of melting. In the case of Lift spread flame apparatus test, color nonwoven is very brittle which almost no flame spread owing to contracting and break by firing strength. The following data are agree with basis: total heat release is 2.66 MJ/$m^2$, limited combustible material (10 min) of incombustible rating appraisal in interior material of building, and incombustible materials (5 min) 8 MJ/$m^2$ in spite of the above data mentioned, those data are only as basis of interior finish, and so I cannot judge color nonwoven have incombustible rating retain through the above data. Accordingly, the basis of incombustible rating and experiment method about exterior finish must be arranged also.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.343-348
• /
• 2011

With the rapid and wide-spread use of mobile communications much attention has been focussed on propagation in the urban area crowed with buildings. It is often surrounded by hills, forests, and mountains. The importance of surface scattering interference between transmitters and receivers on the rough surfaces has been interested and investigated. Therefore, a prediction method is necessary to estimate the influence of rough surfaces on microwave radio propagation. Moreover, most of the mobile communications are performed based on the digital communication system rather than the analog one. In this case, we must pay more careful attention to the signal delay caused by the phase delay due to the multi-path propagation. In this paper we have analyzed numerically scattering of electromagnetic waves from Composite structures by using FVTD (Finite Volume Time Domain) method. We consider two different types of rough surfaces such as periodic and composite structures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.5
• /
• pp.472-485
• /
• 1989

This paper represents the occurrence structure of the timing variation of TV horizontal synchronizing pulse(H-sync pulse) in mobile TV reception. Fluttering ghost is caused by timing varations of the H-sync pulse and is due to frequency elective fading in a multipath propagation envoronment. H-sync timing fluctuations, and hence, fluttering ghost are directly correlated with the multipath parameters, i.e., H-sync timing fluctuations reflect well the severity of the multipath environment. The occurrence structure of H-sync timtng fluctuation is analysed theoretically in relation to the multipath environnment. The occurrence structure of H-sync timing fluctuation is analysed theoretically in relation to the multipath parameters, assuming the two-ray propagation model. The H-sync timing fluctuation occurs with the variation in relative phase and /or D/U variation of long-delayed multipath waves.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.872-878
• /
• 2003

In this paper, we developed a simulator which can generate the polarization waves for the indoor wireless communications based on three dimensional ray tracing technique and verified the simulation results comparing with the measured data in indoor wireless propagation environments. Using the developed simulator, we analyzed the channel characteristic and polarization diversity reception characteristic for the vertical, horizontal and circularly polarized waves. From the analysis results, in the case of using circularly polarized wave it can be clearly seen that the multipath fading is markedly reduced compared to the vertical and horizontal polarized waves due to the reception characteristic of removing the odd time reflected waves.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.123-129
• /
• 1995

본 논문은 차실내 음향 특성 개선 연구로 수행중이며 정상 상태 음향 응답 특성 시험을 통하여 차실내에서 운전자가 듣게되는 음장 특성을 알게 되었고, 라우드 스피커에 대한 음향 특성 시험으로 이러한 차실내 음장의 비평탄성은 라우드 스피커 자체의 문제가 아니라 차실 공간등이 요인에 의한 것이라는 것을 추론할 수 있었다. 배플 상태 및 차량에 장착된 상태하의 라우드 스피커에 대한 임피던스 시험 결과로 임피던스의 장착 부위의 후면 공간이 임피던스 특성 변화를 가져오게 하는 것을 알 수 있었다. 임피던스 시험 결과를 이용하여 라우드 스피커에 대한 모델 매개 변수를 규명할 수 있었고, 이를 이용한 라우드 스피커의 모델 개선이 가능하게 되었다. 또한, 시간 지연 분광법을 이용하여 차실내에서 음향 전파 과정 분석을 할 수 있었고, 이로 인해 운전자가 시간에 따라 다른 음향 응답 특성으로 듣게 되는 것을 알게 되어 향후 음질 개선 연구 수행에 이용될 수 있다. 이러한 방법으로 음이 진행함에 따라 부딪치는 반사면의 흡음 또는 반사 특성을 파악할 수도 있어서 흡음재의 선정 및 라우드 스피커의 장착 위치 및 각도를 선정하는데 이용될 수도 있다. 향후의 연구 방향은 어떠한 음향 패턴이 운전자가 좋은 음향이라고 느끼게 되는지를 규명하는 것, 즉 주관적 평가와 객관적 시험 데이터 사이의 연관성을 확립하는 것과 라우드 스피커 모델링 기법과 차실 공간의 음향 특성을 이용한 차실내 최적 음향 조건을 규명하는 것이 될 것이다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.345-347
• /
• 2016

Recently location based services is being expanded into the indoor service that can not access to the outdoor location informations, such as GPS. Thus, the research and development of an indoor positioning system with BLE(Bluetooth Low Energy) iBeacon technology has expanded. However, RSSI (Received Signal Strength Indicator) that is used as the distance information between the terminal and for positioning iBeacon signal has a problem in that distortion occurs, information such as the signal attenuation and the delay due to the characteristics of radio waves. In this paper, we propose a reliable method of verifying iBeacon signal with the signal distortion problems for reliable indoor positioning systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.476-483
• /
• 2009

Recently much attention has been devoted to femtocell's potential to improve indoor cellular coverage and high speed wireless communications. Femtocell based commercial services have been already launched in some countries and standardization activities are actively on-going, there has been concern however over potential issues of interference between femtocells and the micro/macro networks. With universal frequency reuse, the ensuing cross-tier interference causes unacceptable data rate and outage probability, so an analysis of effect of interference in femtocell embedded networks would be necessary for a stable system design. This paper investigates the effect of interference on system performances of femtocell embedded hierarchical cell structure (HCS) networks considering the characteristics of propagation environments. Various channel parameters are specially considered for indoor environments where most of femtocells are deployed to investigate the effect of interference of femtocell embedded RCS networks. System capacity and coverage are provided with variant distance between macrocell and femtocell, location of the user in femtocell coverage, and characteristic of building structures.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.76-84
• /
• 2007

In this paper, we measured the propagation characteristics of I-UWB channel in time domain and in frequency domain. The measurements carried out in apartment environment while furniture and household electric appliance. Typical indoor scenarios, including line-of-sight(LOS), non-line-of-sight(NLOS) in room-to-room, within-the-room. A transmitting and receiving antenna is a biconical antenna. Results for indoor propagation measurements are presented for power delay profiles(PDP). We extracted the channel characteristic parameters from a power delay profile. Finally, we designed I-UWB channel model in indoor environment, and I-UWB simulator. The results of simulation shows BER characteristics below $10^{-5}$ for SNR over 20[dB].

• Journal of the korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.7-16
• /
• 1979

Laser는 공간적 시간적 가간섭성이 매우 우수하며 단색성, 고출력, 단시간 Pulse등의 특성을 지 니고 있어서 각종의 계측, 통신, 가공, 정보처리, 의료, 농학 등의 다방면에 널리 응용되고 있으나 여기서는 Laser유족계에 대하여 설명하였다. 특히 지금까지 측정불가능하였던 연소현상에 대 해서도 LDV를 활용하여 좋은 연구결과를 얻을 수 있었으나 아직도 연소현상에 대한 LDV의 응용은 정치 Burner화염에 한정되어 있으며 앞으로도 많은 발전의 여지가 있는 부분이다. 그 중에서도 밀폐연소실내에서의 화염면전후의 유속계측, 전화화염의 화염전파속도, 연소속도 등에 관한 연구, 그리고 과도적으로 변동하는 유속, 화염온도, 연소실내 압력의 동시계측에 의한 각종 상관관계연구 및 난류화염유속의 계측 등금후 LDV를 이용한 실험의 발전이 매우 기대되는 바이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6C
• /
• pp.506-515
• /
• 2010

In this paper, we compare and analyze the spectral efficiency of representative adaptive MIMO algorithms in indoor environments. We first briefly investigate the modulation and demodulation schemes of MIMO algorithms to be compared and then implement adaptive algorithms by using BPSK and square QAM schemes up to 256QAM. We finally compare the spectral efficiency of adaptive MIMO algorithms employing (2$\times$2) or (4$\times$4) antenna array through the computer simulation in indoor environments.