• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.547-549
• /
• 2010

In this paper, we propose context-aware system for semiconductor equipment that acquires information from multiple sensors in indoor environment. This proposed system acquires information from acceleration, pressure, temperature and gas sensors then the acquired information send to server. The data transmitted to server generates an alarm via context-aware algorithm of unit event and multi event. From that result, high-quality real-time monitoring is possible because of the reduced unnecessary alarms, and the efficient management is possible because the surrounding information is recognized at once.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.237-237
• /
• 2022

우리나라 하천 내에 설치된 횡단구조물은 보 35,000개소 이상으로 전국 하천의 0.6 km마다 수공구조물이 위치해 있으며 이로 인해 종적(longitudinal) 연결성에 영향을 미치는 것으로 나타났다. 농어촌연구원의 조사에 따르면 하천 횡단구조물이 설치된 구간에 어도 설치율은 14.9%로 나타났으며 이는 수생태 관점에서 연속성이 매우 열악한 상태임을 확인 할 수 있다. 이에 우리나라 각 부처 국토교통부, 환경부 등에서는 수생태 연속성을 확보하고자하는 노력이 지속되고 있으며 대표적으로 어류의 이동통로인 어도를 설치하거나 기존 어도의 효율을 향상시키기 위하여 개보수 작업을 지속적으로 실시하고 있다. 어도의 기능을 평가하기 위해서는 어도 내의 수리특성을 정확히 파악하는 것이 중요한데 연속적인 구조물로 구성된 어도 내 흐름은 매우 복잡하다. 특히 어도 내 구조물간 상호작용에 의하여 비정상 흐름이 발생하며 구조물 뒤에서는 사수역(dead zone)이 형성된다. 사수역에서 나타나는 와류의 거동은 구조물의 기하학적 특성에 따라 변화한다. 본 연구에서는 2차원 수심적분 수치모형을 활용하였으며 벽면 근처 점성저층의 유속분포을 재현하기 위하여와 점성항에 감쇠함수(damping function)를 고려하였다. 수치모형의 검증을 위해 실내 실험수로의 직선 개수로에서 PIV(particle image velocimetry)를 활용하여 연속적으로 배치된 구조물에 의한 유속자료를 활용하였다. 이 결과는 향후 새로운 어도설계 혹은 기 설치된 어도의 수리학적 기능을 평가하는데 활용이 가능할 것으로 보인다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.75-76
• /
• 2022

WPS is a system that finds the location of a current moving object through information of a wireless AP. The current location is determined by utilizing the outdoor and indoor AP signal strength characteristics. Even if the map is configured for the first service, the map information of the DB built by the variability of the AP signal cannot be 100% reliable in the case of outdoor. Therefore, various algorithms are needed to increase the accuracy of WPS. This paper proposes a system to increase positioning accuracy by applying various methods to determine the current position of a moving object.

• Journal of the Korean Society of Radiology
• /
• v.12 no.5
• /
• pp.615-621
• /
• 2018

Recently, various environmentally friendly products have been developed for improving the indoor air quality while pursuing a well-being nature-friendly healthy life as a core value. In this research, we not only solve the problems of existing environmentally friendly paints, but also developed a charcoal composite seats that can reduce radon, which is a natural radioactive substance, and evaluated the reduction effect of radon, formaldehyde and volatile organic compounds. In the charcoal composite seats, a sodium silicate emulsion and charcoal were mixed to prepare an charcoal liquid coating material, and the composite seats was fabricated by air-spray coating method. In order to analyze the hazardous substance reduction performance of the fabricated charcoal composite seats, radon was designed to comply with the Ministry of the Environment standard, formaldehyde and volatile organic compounds were designed to comply with KCL-FIR-1085 standard. As a result of the experiment, the fabricated charcoal composite seats was evaluated as having a radon reduction capability of about 90.8% from 20 hours, formaldehyde and volatile organic compounds were 3 hours, and the reduction capability of 96.7% and 96.6% was found respectively. It is considered that these results can be utilized as basic data at the time of product development for improvement of indoor air quality.

• Korea Science and Art Forum
• /
• v.29
• /
• pp.89-100
• /
• 2017

This research aims to identify spatial features of exhibition hall for trade fair and establish a theoretical model on the effects of these features on the visitor attitudes. Also, it seeks to make suggestions on the service for exhibition environment or marketing activities through empirical analysis. The survey for this research was conducted for one week from Oct. 28 to Nov. 5, 2016 at COEX in Seoul. The 320 questionnaires were distributed to the visitors of the survey period, and all of the questionnaires were returned. Excluding those considered meaningless due to a small number of answered questions, a total of 303 samples were used for empirical analysis. The empirical analysis was conducted through SPSS 24.0. The results showed that each element of spatial features of the exhibition hall has significant effects on the visitor intuitive attitude. On the other hand, only Aesthetic and Convenience of spatial features of the exhibition hall has significant effects on the visitor conative attitude As above, this research conducted empirical researches on the effects of spatial features on visitor attitudes at exhibition hall to provide guidelines for establishing strategic management schemes of exhibition space that provide more convenient and pleasant environment. Also, this research aims to suggest development directions for organizer to provide quality service and environment, turning them into comfortable spaces that communicate with the visitors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1824-1832
• /
• 2011

In this paper, a smart home service robot McBot II is newly developed in much more practical and intelligent system than McBot I which we had developed a few years ago. Thus far, vacuum-cleaners have lightened the burden of household chores but the operational labor that vacuum-cleaners entail has been very severe. Recently, a cleaning robot was commercialized to solve but it also was not successful because it still had the problem of mess-cleanup, which pertained to the clean-up of large trash and the arrangement of newspapers, clothes, etc. Hence, we develop a new home mess-cleanup robot McBot II to completely overcome this problem on real environments. The mechanical design and the basic control of McBot II, which performs mess-cleanup function etc. in house, is actually focused in this paper. McBot II is mechanically modeled in the same method that the human works in door by using the waist and the hands. The big-ranged vertical lift and the shoulder joints to be able to forward move are mechanically designed for the operating function as the human's waist when the robot works. The mobility of McBot II is designed in the holonomic mobile robot for the collision avoidance of obstacle and the high speed navigation on the small area in door. Finally, good performance of McBot II, which has been optimally desinged, is confirmed through the experimental results for the control of the robotic body, mobility, arms and hands in this paper.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.440-448
• /
• 2016

As recent buildings become more air tight, the natural ventilation rate is significantly reduced and it leads to difficulty in removing accumulated moisture in buildings. Hot and humid weather in summer and the large amount of moisture caused by indoor activity are the major factors of moisture problem in Korea. The hygrothermal behavior of building environment has to be considered carefully to reduce condensation risk and mold growth potential, and comfortable indoor environment. In this study, we evaluated hygrothermal behavior of Standard Wood-frame Structure published in the Korea Rural Community Corporation Using WUFI simulation program. The results indicated that the total water contents of wood wall measured in 2014 was lower than wood wall in 2010. As a result of evaluation by separating the farming and fishing areas, Moisture problems in fishing area became larger. The walls had a significant impact on the relative humidity than the temperature each areas. Furthermore, excessive water content problem of the wood-based material was reduced in the wall that could be applied in the fishing villages by changing the outdoor finishing materials. And Mold growth risk on the interior materials could be removed through the different setting of the indoor temperature during summertime.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2857-2863
• /
• 2014

IR-UWB has been developed as a standard of indoor ranging technology, because it has robust and good transmission characteristics in indoor environments and it can be operated with low power. In this paper, a IR-UWB packet analyzer is designed and implemented based on IEEE 802.15.4a, which is useful in developing IR-UWB real time location system with resolution of a few ten centimeters. A sniffer device of the packet analyzer monitors IR-UWB wireless networks, captures MAC packet frames, and transmits packet frames to the packet analyzing computer. The packet analyzing program in a computer analyzes received MAC packet frames and displays parsed packet information for developing engineers. Developed packet analyzer is used to analyze IEEE 802.15.4a MAC protocol, and also it can be used in other IEEE 802 series MAC protocol by modifying some functions.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.957-972
• /
• 2018

Tunnels constructed in cold regions can cause serious defects such as cracks and leaks due to external temperature changes in the portals and vents. In order to prevent the freezing damage of the tunnel, appropriate measures should be applied to the section where the freeze damage is concerned. However, the specific criteria and contents for judging whether or not the anti-freeze measures are applied are not presented. In this study, the laboratory freezing tests on the temperature changes of the concrete specimens under freezing conditions were carried out. And the freeze-thaw repetition cycle (F), which can judge the possibility of freezing damage, were presented based on the heat transfer quantity (W) by experimental results of case studies. Also, we propose a classification of cold regions considering the climatic characteristics of Korea for using it to efficient design and maintenance.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.421-426
• /
• 2018

With regard to LED lighting devices which have currently been commercialized, LED operating sequences are being sold in a fixed state. In such a state, the external environmental factors are not taken into consideration as only the illumination environment application is considered. Currently, it is difficult to create an optimal lighting environment which can adapt to changes in external environmental factors in the ship. Therefore, it was concluded that there is a need to input the external environment value so that the optimal illumination value can be reflected in real time in order to adapt more organically and actively to the change of external environmental factors. In this paper, we used a microprocessor as an integrated management system for environmental data that changes in real time according to existing external environmental factors. In addition, a controller capable of lighting control of RGB LED module by combining fuzzy inference system. For this, a fuzzy control algorithm is designed and a fuzzy control system is constructed. The distance and the illuminance value from the external environment element are input to the sensor, and these values are converted to the optimum illumination value through the fuzzy control algorithm, and are expressed through the dimming control of the RGB LED module and the practical effectiveness of the fuzzy control system is confirmed.