• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.527-529
• /
• 2015

The control delays at signal intersections have proved the source of numerous vehicular and environmental complications. Control delays both directly and indirectly hinder time- and cost-effective driving by extending the duration of time spent on the road and exhausting excessive amounts of fuel. They furthermore cause traffic congestion, thereby raising overall emission levels. It is therefore imperative to reduce control delays in order to achieve time and fuel economy and reduce vehicle-related pollution. The following study accordingly uses genetic algorithms to optimize traffic signals in congested environments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.910-916
• /
• 1999

This paper presents the effective improvement of the thermal runaway phenomenon in high power SSPA when the RF input signal is not provided. The total gate resistors are optimized by the experiments and deducing the variation of velocity and currents of thermal runaway, which is based on manufacturer's recommendation. Especially, it is solved the complex thermal runaway that related gate resistors with the gate voltage variable circuit. The result of this paper is able to apply for improving the thermal runaway in existence of high power SSPA for WLL, cellular system and PCS repeater.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1922-1929
• /
• 2008

In order to install ATP system for KTX safety running, a study has been done to examine measures to ensure the interface between KTX and ATP system. Although onboard signaling system is efficient and has been verified both at home and abroad, alternatives for optimum installation shall be adopted so as to show designated performance taking into account the given peripheral device. A solution to interface between beacon and onboard system shall be presented especially for the KTX, which runs on both high speed and conventional line (ATP-ATS). Furthermore, the method for controlling the braking process and recorder shall be studied.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.7
• /
• pp.111-115
• /
• 2008

This paper describes the optimization of injection molding conditions to minimize sink marks. Sink marks, which refer to a small depression on the surface opposite a thick wall thickness, are often encounted in injection molded plastic parts. Part geometry, material properties and processing conditions during injection molding can affect the sink mark depth. We designed the runner system which is possible balanced filling to cavities using CAE program $Moldflow^{TM}$ and then obtained optimal processing conditions by Taguchi's Robust Design technique. By actual injection molding using optimized mold and molding conditions, it confirmed that sink mark depth decreased zero compared to 1mm level in the conventional mold and process.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.1-2
• /
• 2018

해상 선박의 안전을 위해 해저의 객체 및 장애물의 정확한 탐지를 위해 해저환경에서 감쇠현상이 비교적 적은 음파 기반의 소나가 널리 활용된다. 그러나 기존의 소나 영상 시뮬레이션은 고해상도의 영상, 잡음 처리, 해저지형과 객체 데이터 등의 방대한 데이터 처리로 인해 물체 탐지 및 식별을 위한 처리속도와 비용이 크게 증가한다. 이러한 문제를 최소화하기 위해서 해저지형, 객체 생성과 잡음 처리 모델을 Multi-Threading, SIMD 등 병렬처리를 적용하여 처리속도를 최적화 한다. 본 논문에서는 혼합된 병렬처리 방법을 적용하여 소나를 기반으로 해저 환경 시뮬레이션을 위한 모의 신호를 생성하는 성능을 향상시킨다. 병렬처리로 인해 개선된 성능을 순차처리에 따른 속도와 실험적으로 비교한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.556-556
• /
• 2013

반도체 공정에서 널리 사용되고 있는 유도결합 플라즈마에서 전자밀도 분포특성이 컷오프탐침을 이용하여 측정되었다. 밀도측정에 일반적으로 많이 사용되고 있는 랭뮤어 탐침은 플루오르카본과 같은 반응성이 높은 가스를 사용하는 경우 탐침 끝부분이 증착 혹은 식각되거나 플라즈마전위 변동 때문에 V-I 곡선 특성이 왜곡되는 현상이 발생한다. 반면, 컷오프 탐침을 이용하는 경우 플라즈마 고유주파수를 실험적으로 결정하는데 여러 가지 제약이 있다. 본 연구에서는 두가지 측정방법의 비교를 통해 각 방법의 장단점을 실증적으로 비교하고 대면적 유도 결합플라즈마에서 전자밀도균일도를 조사하였다. 량뮤어 탐침법에서는 플라즈마와 탐침사이의 임피던스를 최소화 하는 튜닝회로의 최적화가 이루어 졌으며 컷오프 탐침에서는 안테나 구조에 따른 수신안테나의 신호전달 및 주파수특성에 대해 연구되었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.903-905
• /
• 2013

In this paper, we propose the CPW antenna with a spiral geometry for miniaturization. Widths of a spiral line are constant, and three stubs are added to broaden bandwidth. Proposed antenna is designed. Lengths and widths of three stubs are gradually changed and optimized.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.507-511
• /
• 2018

This paper proposes a method for system development for high speed (300MHz) test of system IC semiconductors. The high-speed test system proposes a high-speed test circuit interface and a PCB design method for noise reduction. This paper proposes evaluation items and procedures for verifying the performance of the developed system. System IC The development of high speed test systems will help optimize the development of domestic system IC test equipment.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.11a
• /
• pp.148-150
• /
• 2016

영상 신호에 대해 인공지능적인 프로세스를 수행하는 방법들 중에 우수한 성능을 나타내면서 주목을 끌고 있는 방법으로 Convolution Neural Network(CNN)이 있다. 이를 구성할 때 전반부는 convolution network로 구현되고, 후반부는 Neural Network(NN)로 구현된다. 이때, 전반부에서 convolution 과정을 수행하기 위해 다양한 필터가 사용되는데, 이 필터들의 초기값에 따라 CNN의 성능이 달라지게 된다. 본 논문에서는 CNN의 성능을 향상시키기 위해 convolution network의 초기값을 설정하는 방법에 대해 제안하며, 이를 컴퓨터 실험을 통해 증명하기 위해 필기체 인식이라는 응용 알고리즘을 구현하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.141-145
• /
• 2011

We theoretically investigated dispersion tolerance of an optical duobinary transmitter employed a Mach-Zehnder modulator and an optical filter. Compared to the optical transmitter based on a Mach-Zehnder modulator and an optical delay interferometer by optimizing the applied voltage for improving the dispersion tolerance, the demonstrated duobinary transmitter provides improved receiver sensitivity and higher dispersion tolerance while maintaining narrow spectral bandwidth.