• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.962-969
• /
• 2011

This paper proposes the DOA estimation method based on TDOA/AOA for jammer localization method in GBAS environment. The proposed method can effectively estimate DOA of jamming signal as the range for DOA estimation is reduced remarkably by using DOP and 1st approximate solution using TDOA measurements only. Through the proposed method, more precise DOA can be obtained and the performance of jammer localization is increased simultaneously. Also, the effectiveness of proposed method will be confirmed through the simulated results.

• Journal of Internet Computing and Services
• /
• v.6 no.5
• /
• pp.167-175
• /
• 2005

In the microcell or picocell-based system the frequent movements of mobiles bring about excessive traffics Into the networks. A mobile location estimation mechanism can facilitate both efficient resource allocation and better QoS provisioning through handoff optimization. Existing location estimation schemes consider only LOS model and have poor performance in presence of multi-path and shadowing. In this paper we study multi-criteria decision making which can increase estimation accuracy by considering other multiple decision parameters than the received signal strength.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.5
• /
• pp.529-536
• /
• 2008

Researches about 3-D Positioning system using GPS were carried out many-sided by national organs, laboratories, the worlds of science. And most of researches were development of relative positioning algorithm and its applications. Relative positioning has a merit, which can eliminate error in received signals. But its error increase due to distance of baseline. GPS absolute positioning is a method that decides the position independently by the signals from the GPS satellites which are received by a receiver at a certain position. And it is necessary to correct various kinds of error(clock error, effect of ionosphere and troposphere, multi-path etc.). In this study, results of PPP(Precise Point Positioning) used Bernese GPS software was compared with notified coordinates by the NGII(National Geographic Information Institute) in order to analyze the positional accuracy of permanent GPS sites. And the results were compared with results of AUSPOS - Online GPS Processing Service for comparison with relative positioning.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.275-276
• /
• 2021

In the event of a fire in a complex, the identification of isolated people's location information is delayed, resulting in many casualties. In order to prevent such an accident, research on estimating the location of the requesters by detecting the wireless signal of the mobile phone at fire sites is in progress. The main concept is to use a wireless signal scanner to detect the wireless signal of a mobile phones at fire sites, and then position the mobile phone based on this. However, it is difficult to secure visibility at the fire site due to the smoke, and there is a difficulty in rescuing requesters in need compared with general disaster sites. Therefore, it will be one of the important issues to be solved to determine the minimum number of rescuers to be deployed according to the number and condition of the requesters. In this study, we propose a method to calculate the number of rescuers put to fire sites by using the radio signal generated from mobile phones and the information generated from the inertial sensor of the mobile phones.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.235-236
• /
• 2021

As a result of analyzing the fire accident of the Jecheon complex that occurred at the end of 2017, there have been many casualties due to delays in checking the location information of isolated people. In order to prevent such an accident, various research has been conducted to estimate the location of requesters by means of detecting wireless communication information of mobile phones existing at disaster sites. The main concept is to detect an RF signal of a mobile phone at fire sites and, based on this, precisely estimate the location of the mobile phone on the LOS/NLOS. However, it is difficult to get visibility at fire sites due to smoke and the fire. Therefore, apart from estimating the location of requesters, a research is also needed to determine the direction of entry within fire sites. In this paper, we propose a method to determine a direction of entry to provide effective rescue activities using wireless communication information of mobile phones.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.6
• /
• pp.727-732
• /
• 2009

In this paper, the dependence of the Kalman filter-based emitter location algorithm on the initial estimate is investigated. Given all the LOB data, the initial estimate of the emitter location is obtained from the linear LSE algorithm with the former LOB data. Using the initial estimate, the Kalman filter algorithm is applied with the remaining LOB data to update the initial estimate. It is shown that as the number of data used in the calculation of the initial estimate increases, the accuracy of the final estimate is improved and the total computational complexity of obtaining the initial estimate and the final estimate increases. In addition, the dependence of the performance of the Kalman filter algorithm on the predefined constant is illustrated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.268-274
• /
• 2016

To find the location of a random noise source present in the three-dimensional space is required at least four microphones. Using four microphones distributed in a three-dimensional space, noise source imaging technique was applied and evaluated on their performance. To compensate resolution problem which comes from both the position of the sensor array is fixed and the sampling frequency is low, up-sampling technique and interpolation function were applied. Five different interpolation methods were applied such as zero-padding, zero-order hold, first-order hold, spline function, and random signal padding. The up-sampling rate were chosen by two, four, eight times, and counting up 16 times. As a result, it was possible to more accurately estimate the position of the noise source according to the higher of the up-sampling rate. It also found that the first-order hold and the spline function's performance were slightly falling relative to other methods.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04a
• /
• pp.779-782
• /
• 2002

영상 압축 분야에서 데이터의 압축이 필수적인데, 이때 가장 많은 중복성을 가지고 있는 시간적 중복성은 이전 프레임의 데이터를 이용하여 움직임 추정과 움직임 보상을 수행하고 추정된 움직임 벡터에 의해서 보상된 영상과 원 영상과의 차 신호를 부호화하여 데이터를 압축한다. 움직임 추정과 움직임 보상 기법은 비디오 영상압축에서 중요한 역할을 하지만 많은 계산량으로 인하여 실시간 응용 및 고해상도 응용에 많은 어려움을 가지고 있다. 만일 움직임 추정을 하기 전에 블록의 움직임을 예측할 수 있다면 이를 바탕으로 탐색 영역에서 초기 탐색점의 위치 및 탐색 패턴을 결정할 수 있다. 본 논문에서는 움직임 벡터의 높은 공간적 상관성을 이용하여 초기 탐색점의 위치와 탐색 패턴을 결정함으로써 적응적으로 움직임 벡터를 추정하는 새로운 기법을 제안하고 성능을 평가한다. 실험을 통하여 제안된 알고리즘은 계산량의 감소에 있어서 높은 성능 향상을 보였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10a
• /
• pp.797-800
• /
• 2001

영상 압축 분야에서 데이터의 압축이 필수적인데, 이때 가장 많은 중복성을 가지고 있는 시간적 중복성은 이전 프레임의 데이터를 이용하여 움직임 추정과 움직임 보상을 수행하고 추정된 움직임 벡터에 의해서 보상된 영상과 원 영상과의 차 신호를 부호화하여 데이터를 압축한다. 움직임 추정과 움직임 보상 기법은 비디오 영상압축에서 중요한 역할을 하지만 많은 계산량으로 인하여 실시간 응용 및 고해상도 응용에 많은 어려움을 가지고 있다. 만일 움직임 추정을 하기 전에 블록의 움직임을 예측할 수 있다면 이를 바탕으로 탐색 영역에서 초기 탐색점의 위치 및 탐색 패턴을 결정찬 수 있다. 본 논문에서는 움직임의 높은 시간적 상관성을 이용하여 초기 탐색점의 위치와 탐색 패턴을 결정함으로써 적응적으로 움직임 추정하는 새로운 기법을 제안하고 성능을 평가한다. 실험을 통하여 제안된 알고리즘은 계산량의 감소에 있어서 높은 성능 향상을 보였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.246-253
• /
• 2003

The initiation and growth of short fatigue cracks in the simulated aircraft structure with a series of rivet holes was detected by acoustic emission (AE). The location and the size of short tracks were determined by AE source location techniques and the measurement with traveling microscope. AE events increased intermittently with the initiation and growth of short cracks to form a stepwise increment curve of cumulative AE events. For the precise determination of AE source locations, a region-of-interest (ROI) was set around the rivet holes based on the plastic zone size in fracture mechanics. Since the signal-to-noise ratio (SNR) was very low at this early stage of fatigue cracks, the accuracy of source location was also enhanced by the wavelet transform do-noising. In practice, the majority of AE signals detected within the ROI appeared to be noise from various origins. The results showed that the effort of structural geometry and SNR should be closely taken into consideration for the accurate evaluation of fatigue damage in the structure.