• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.245-251
• /
• 1998

좌회전 제어네는 크게 좌회전을 금지하는 적극적인 제어에서 좌회전 신호와 좌회전 차선의 디자인 및 차선 설정과 같은 비교적 소극적인 제어가 있다. 기존의 좌회전에 관한 많은 연구는 대부분 후자의 소극적인 제어를 통한 제어효과를 파악하는데 주로 관심을 두었다. 좌회전금지의 효과분석 방법론에는 크게 교차로 및 링크(Link)와 네트워크(Network)의 두가지 차원의 접근 방법이 있다. 교차로 및 링크(Link) 차원의 분석은 TRANSYT 7F, PASSER IV 등과 같은 가로망에서 신호시간을 최적화하는 모형과 NETSIM, COSIM과 같이 조건에 따라 실제 차량의 행태를 모사하는 시뮬레이션 모형 등에서 좌회전 신호현시를 주거나, 주지 않음으로써 전후의 변화를 관찰, 분석에 이용할 수 있다. 그러나, 이러한 접근방법은 개별교차로에서 현시운영에 따른 효과를 분석하기에는 용이할 지 모르나, 좌회전 금지에 따라 전환된 교통량을 합리적으로 처리하는데 문제를 가지고 있다. 이에 반해 네트워크(Network) 차원의 분석은 좌회전 금지에 따른 거시적 수요변화를 파악하여, 좌회전금지에 따라 전환된 교통량을 합리적으로 수용 할 수 있으며, 교차로 및 링크(Link) 차원의 분석기법과의 결합을 통해 개별교차로에서 현시운영에 따른 효과도 어느정도 예견할 수 있을 것으로 예상되지만, 이에 관련한 여구가 전무한 형편이다. 본 연구의 목적은 네트워크(Network) 차원에서 좌회전 금지에 따른 효과 분석 모형을 정립하고, 가상 네트워크에 적용 그 유효성을 검증하여, 지역 네트워크의 개별교차로에서 좌회전 금지의 도입에 대한 의사결정의 기준을 마련하는데 있으며, 이를 위한 구체적 연구 내용은 다름과 같다. 첫째, 순간 동작 사용자 최적 통행배정모형의 구조 및 특성 파악. 둘째, 기존 가로망 표현기법의 구조 및 특성파악. 셋째, 좌회전 금지에 따른 효과 분석을 위한 순간 동적 사용자 최적 통행배정모형의 구축. 넷째, 좌회전 금지에 따른 효과 분석을 위한 가로망 표현기법의 개발. 다섯째, 가상 네트워크에서 구축된 모형을 통한 교차로에서 좌회전 금지 효과분석

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.6
• /
• pp.21-27
• /
• 2023

Modern naval ships install an Infra-Red Signature Suppression system (IRSS) in their exhaust pipe to reduce infrared signature emitted to the outside. In addition, naval ships are strategic assets with a very long life cycle, so high reliability of the performance of the equipment on board must be guaranteed. Therefore, equipment such as IRSS is evaluated for performance through model testing at the design stage. A variety of measuring instruments are used in IRSS model testing, and the reliability of these instruments must also be guaranteed. In this paper, a study was conducted to evaluate the reliability of measurement equipment used in IRSS model testing. The test equipment and instruments used were a hot gas wind tunnel, pitot tube, digital differential pressure gauge, thermocouple sensor, and digital recorder. As the fan speed of the hot gas wind tunnel increased, the measurement deviation of the flow decreased, and the temperature output of the thermocouple sensor showed differences in response time and stability depending on the method used.

• Proceedings of the KOR-KST Conference
• /
• 1998.10b
• /
• pp.296-296
• /
• 1998

고속도로 교통축은 고속도로와 운전자가 대체도로로 이용할 수 있는 표면가로로 구성된 가로망을 말한다. 이러한 고속도로에서의 도로망의 효율을 극대화하기 위해서 시행되고 있는 제어기법으로는 고속도로 진입램프에서의 램프미터링과 표면가로에서의 신호시간조정 등을 들 수 있다. 그러나, 이를 통합한 제어전략은 아직 고려되고 있지 못하다. 고속도로에서 사고나 극심한 혼잡으로 인해 지체가 되었을 경우 단순히 진입램프에서 램프미터링만을 실행하는 것이 아니라 부체도로로의 경로전환을 통해 고속도로교통축의 효율을 극대화할 수 있다. 이는 지능형교통체계(ITS)에서 고려하고 있는 경로안내시스템과도 결부된다. 그러므로, 고속도로 교통축에서는 진입램프에서의 램프미터링전략과 진출램프에서의 경로전환전략, 표면가로에서의 신호최적화전략을 통한 제어를 실행할 수 있다. 따라서, 본 논문에서는 고속도로에서의 진입램프미터링과 진출램프를 통한 경로전환, 표면가로에서의 신호시간조정을 통합한 제어모형을 구축하고, 그에 따른 통합제어알고리즘을 개발하는 것을 본 논문의 목적으로 한다. 통합제어모형은 적정 제어변수의 값을 구하기 용이하게 하기 위해 선형계획법을 적용하였으며, 시뮬레이션을 통해 통합제어알고리즘을 우수성을 검증하였다.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.145-157
• /
• 2004

The cycle length design model of the Korean traffic responsive signal control systems is devised to vary a cycle length as a response to changes in traffic demand in real time by utilizing parameters specified by a system operator and such field information as degrees of saturation of through phases. Since no explicit guideline is provided to a system operator, the system tends to include ambiguity in terms of the system optimization. In addition, the cycle lengths produced by the existing model have yet been verified if they are comparable to the ones minimizing delay. This paper presents the studies conducted (1) to find shortcomings embedded in the existing model by comparing the cycle lengths produced by the model against the ones minimizing delay and (2) to propose a new direction to design a cycle length minimizing delay and excluding such operator oriented parameters. It was found from the study that the cycle lengths from the existing model fail to minimize delay and promote intersection operational conditions to be unsatisfied when traffic volume is low, due to the feature of the changed target operational volume-to-capacity ratio embedded in the model. The 64 different neural network based cycle length design models were developed based on simulation data surrogating field data. The CORSIM optimal cycle lengths minimizing delay were found through the COST software developed for the study. COST searches for the CORSIM optimal cycle length minimizing delay with a heuristic searching method, a hybrid genetic algorithm. Among 64 models, the best one producing cycle lengths close enough to the optimal was selected through statistical tests. It was found from the verification test that the best model designs a cycle length as similar pattern to the ones minimizing delay. The cycle lengths from the proposed model are comparable to the ones from TRANSYT-7F.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.26-36
• /
• 2008

Currently, the pedestrian signal timing model has no consideration on the characteristics of different land use patterns and pedestrian behaviors during pedestrian signal timing calculation. This study intended to propose pedestrian signal timing models that could reflect the inherent characteristics of pedestrian and land use patterns. For this study, three major variables affecting the length of signal timing were identified: walking speed, perception-reaction time, and density-delay time. Then, the representative values of each variable were estimated through the field studies. By combining this information, several pedestrian signal timing models were developed. The data in this paper can be used for future references, and the walking environments for pedestrians could be improved by applying the models suggested in this paper.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.343-353
• /
• 2011

The unsignalized intersections in a community road in the city of Seoul have 3,753 traffic accidents(9%) of total 41,702 cases in 2008, not high in the occurrence rate of traffic accidents, but seem to have a quite high potential of accidents due to the unreasonable and insufficient operation of systems and facilities in the part of traffic foundations. In particular, the un-signalized intersections in a community road have an insufficient measure for safety as compared to the crossroads with signals, and there are few analysis of traffic accidents and domestic researches on the model of affecting factors. Our country also has no concept of passing priority in operating a crossroad without signals, differently from foreign countries, so the researches and safety measures for improving the safety of a crossroad without signals in a community road are urgent. Therefore, This study set out to analyze the road conditions, traffic conditions, and traffic environment conditions on unsignalized intersection, to identify the elements that would impose obstructions in safety, and develop a traffic accident prediction model to evaluate the safety of an unsignalized intersection using the correlation between the elements and an accident. In addition, the focus was made on suggesting appropriate traffic safety policies by dealing with the danger elements in advance and on enhancing the safety on intersection in developing a traffic accident prediction model for an unsignalized intersection.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.131-139
• /
• 1999

The quality of progression at signalized intersection has the largest potential effect. TRANSYT-7F is widely used to estimate the signal progression delay, but the progress of collecting and executing the compute program appears to be rather cumbersome. The research is to develop the analytical and progressing platoon delay model that is as simple as the methodology of HCM and familiar with the output of simulation model. The general approach to this research was conducted to examine the Rouphail and NCHRP 339 methodology together with the existing progression delay model (TRANSYT-7F. HCM). The scope is contained to be applicable only to cycles with no overflow queue and to obtain a comprehensive evaluation of the effects of changes in the quality of traffic signal progression on stopped delay and to be analyzed a simple mathematical method. The principle assumption for this model is that secondary flows is dispersed and partly mixed with average flow of the primary progressed flow. A second assumption is that through flow is consisted with the part of saturation flow at the front of it and the part of average flow at the rear of it. The delay equations vary for two arrival. The conclusion of this study could be summarized as 1)The evaluation of this model was consistently similar to that of TRANSYT-7F, 2) Platoon pattern has the real traffic flow characteristics. 3) The computing process of progression delay is made to have simple logic and easy calculation by integration, 4) This model could be estimated to be applied in almost all case.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.504-509
• /
• 1995

컴퓨터에 의한 생산시스템의 통합체계화와 온-라인화에 따라 자동화된 설비진단 방법이 요구되어지고 있다. 이에 따라 기계설비에 각종 센서를 부착하여 실시간으로 수집된 출력신호를 이용하여 기계설비를 온-라인으로 감시하는 여러가지 기법들이 제시되고 있다. 본 연구에서는 진동센서로부터의 신호를 radial 함수에 근거한 다단계 뉴럴 네트워크(Neural Network)로 모형화하여 기계설비 상태를 감시하는 방법을 제시한다. 또한 다단계 모델링 분석을 통하여 신호를 예측하고 설비고장 원인을 분류하며, 다른 모형과의 비교를 통하여 효율성 평가와 최적 단계수를 결정하였다. 온라인 학습 알고리즘은 recursive least squares와 clustering 방법을 이용한다.

• Proceedings of the KOR-KST Conference
• /
• 1998.10a
• /
• pp.252-260
• /
• 1998

본 논문은 기개발된 간선도로 연동하 신호최적화 모형인 KS-SIGNAL의 최적화 수행속도를 향상하기 위한 새로운 모형식 및 방법론을 제시하고 평가하였다. 본 논문에서는 탑재, 좌회전 현시순서에 관한 제약식 추가 등의 3단계 작업을 실시하였다. 첫 번째 단계인 모형식의 수정에 있어서는 기존의 모형식에서 변수로 사용하던 대가차량 소거시간을 상수로 산정함으로써 일부 제약식 및 변수를 소거시킬 수 있었으며, 두 번째 단계에서는 선형계획식의 해를 구하기 위한 툴로 사용되는 Wondow용 Lindo library를 탑재, 새로이 변형된 형식의 모형식을 제안한다. 마지막으로 세 번째 단계에서는 좌회전 현시 순서에 관한 제약식을 추가함으로써 최적화 작업에 대한 경우의 수를 줄임으로써 수행속도를 향상시키는 방법론에 대해 제시한다. 결론적으로 기존의 KS-SIGNAL과 비교해 최적화 수행속도는 99%이상 향상되었으며, 도출된 해 또한 타 모형식과 비교해 우수한 결과를 나타냈다.

• Journal of Korean Society of Transportation
• /
• v.30 no.6
• /
• pp.93-102
• /
• 2012

The frequency and severity of traffic accidents related to signalized intersections in urban areas have been more serious than those in both arterial segments and crosswalks. Especially, traffic accidents involved with injuries and fatalities have caused by traffic signal violations within intersections. Therefore, many countries including Korea have installed the red light enforcement camera (RLE) to reduce traffic accidents associated with the traffic signal violation. Meanwhile, many methodologies have been studied in terms of safety impacts estimation of red light enforcement, which, however, cannot be easy to conduct. In this study, safety impacts was estimated for intersections of Chicago downtown area using SPF models and EB approach. As a result, for all crash types and target traffic accident types such as "angle", "rear end", "sideswipe in the same and other directions", "turn", and "head on", fatal crashes were reduced by 26% and 38%. However, RLE may increase property-demage-only-crashes by 3.23% and 1.16%, respectively.