• Title/Summary/Keyword: 신재생 에너지원

Search Result 705, Processing Time 0.032 seconds

Dynamic Model of a Passive Air-Breathing Direct Methanol Fuel Cell (수동급기 직접 메탄올 연료전지의 동적 모델)

  • Ha, Seung-Bum;Chang, Ikw-Hang;Cha, Suk-Won
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2008.05a
    • /
    • pp.33-36
    • /
    • 2008
  • The transient behavior of a passive air breathing direct methanol fuel cell (DMFC) operated on vapor-feeding mode is studied in this paper. It generally takes 30 minutes after starting for the cell response to come to its steady-state and the response is sometimes unstable. A mathematical dynamic one-dimensional model for simulating transient response of the DMFC is presented. In this model a DMFC is decomposed into its subsystems using lumped model and divided into five layers, namely the anodic diffusion layer, the anodic catalyst layer, the proton exchange membrane (PEM), the cathodic catalyst layer and the cathodic diffusion layer. All layers are considered to have finite thickness, and within every one of them a set of differential-algebraic governing equations are given to represent multi-components mass balance, such as methanol, water, oxygen and carbon dioxide, charge balance, the electrochemical reaction and mass transport phenomena. A one-dimensional, isothermal and mass transport model is developed that captures the coupling between water generation and transport, oxygen consumption and natural convection. The single cell is supplied by pure methanol vapor from a methanol reservoir at the anode, and the oxygen is supplied via natural air-breathing at the cathode. The water is not supplied from external source because the cell uses the water created at the cathode using water back diffusion through nafion membrane. As a result of simulation strong effects of water transport were found out. The model analysis provides several conclusions. The performance drop after peak point is caused by insufficiency of water at the anode. The excess water at the cathode makes performance recovery impossible. The undesired crossover of the reactant methanol through the PEM causes overpotential at the cathode and limits the feeding methanol concentration.

  • PDF

Glass / p ${\mu}c-Si:H$ 특성에 따른 i ${\mu}c-Si:H$ 층 및 태양전지 특성 변화 분석

  • Jang, J.H.;Lee, J.E.;Kim, Y.J.;Jung, J.W.;Park, S.H,;Cho, J.S.;Yoon, K.H.;Song, J.;Park, H.W.;Lee, J.C.
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2009.06a
    • /
    • pp.31-31
    • /
    • 2009
  • PECVD를 이용하여 제조된 미세결정질 p-i-n 실리콘 박막 태양전지에서, p 층은 태양전지의 윈도우 역할 및 그 위에 증착될 i ${\mu}c-Si:H$ 층의 'seed'층 역할을 수행하기 때문에, p층의 구조적 및 전기적, 광학적 특성은 태양전지의 전체 성능에 큰 영향을 미칠 수 있다. 본 연구에서는 $SiH_4$ 농도를 변화시켜 각기 다른 결정 특성을 갖는 p ${\mu}c-Si:H$층을 제조하고 그 위에 i ${\mu}c-Si:H$ 층을 증착하여 p층의 결정 특성변화와 그에 따른 i ${\mu}c-Si:H$ 층 및 'superstrate' p-i-n 미세결정질 실리콘 박막 태양전지의 특성 변화를 조사하였다. P층의 경우, $SiH_4$ 농도가 증가함에 따라 결정분율 (Xc)이 감소하여 비정질화되었으며 그에 따라 dark conductivity가 감소하는 경향을 나타내었다. 각기 다른 결정분율을 가지는 p 'seed' 층 위에 증착된 태양전지는, p 'seed' 층의 결정분율이 증가함에 따라 개방전압, 곡선인자, 변환효율이 경향적으로 감소하였다. 이는 p 층 결정분율 변화에 따른 p/i 계면특성 저하 및 그 위에 증착되는 i ${\mu}c-Si:H$ 층의 결함밀도 증가 등에 따른 태양전지 특성 감소 때문인 것으로 판단되며, 이를 분석하기 위하여 i ${\mu}c-Si:H$ 층의 전기적, 구조적 특성 분석 및 태양전지의 dark I-V 특성 등을 분석하고자 한다.

  • PDF

$CO_2$ Separation in Pre-Combustion using Principles of Gas hydrate Formation (연소전 탈탄소화 적용을 위한 $CO_2/H_2$ 하이드레이트 형성 및 분리 연구)

  • Lee, Hyun-Ju;Lee, Ju-Dong;Lee, Yoon-Seok;Lee, Eun-Kyung;Kim, Soo-Min;Kim, Yang-Do
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2009.06a
    • /
    • pp.698-698
    • /
    • 2009
  • 화력발전이 많은 비중을 차지하는 전력생산 산업은 온실가스($CO_2$)의 최대 배출 원으로 알려져 있으며 증가하는 전력 수요 뿐 만 아니라 다가오는 기후변화협약에 대응하기 위하여 $CO_2$ 회수 및 공정 개선에 관한 연구가 많이 수행되고 있다. 특히 현재 연구되고 있는 전력분야의 대표적인 $CO_2$ 회수기술은 연소 후 포집(Post-combustion capture), 순산소 연소(Oxy-fuel combustion), 연소전 탈탄소화(Pre-combustion) 3가지로 구분된다. 이중 연소전 탈탄소화 기술은 석탄가스화복합발전(IGCC) 기술과 연계하여 $CO_2$를 회수할 수 있는 방법으로 가스화 된 석탄가스에 Water-Gas Shift 반응과, $CO_2$ 분리로 얻어진 탈 탄소 연료를 통해서 전력을 생산한다. 이 기술의 핵심은 생성된 $CO_2/H_2$ 복합가스로부터 $CO_2$를 분리하는 공정으로 차세대 회수 기술로는 Membrance Reactor, SOFC, Oxygen Ion Transfer Membrane(OTM), 그리고 가스 하이드레이트가 있다. 이중 가스 하이드레이트는 $CO_2$의 회수 뿐 만 아니라 처리 기술에도 적용 가능하지만 우리나라에는 이에 관한 기술이 전무한 형편이다. 본 연구에서는 가스 하이드레이트 형성원리를 이용하여 정온 정압 조건에서 $CO_2/H_2$ 하이드레이트를 제조하였으며 특히, 하이드레이트 형성 촉진제인 THF(Tetrahydrofuran)를 첨가하여 THF 농도에 따른 상평형 및 속도론 실험을 수행 하였다. 이러한 연구는 연소전 탄소화 기술에서의 $CO_2$ 회수 분리에 대한 핵심 연구임과 동시에 탄소배출권 규제에 실질적인 기여를 할 수 있을 것으로 사료된다.

  • PDF

Novel Water-Soluble Polyfluorenes as an Interfacial layer leading to Cathodes-Independent High Performance of Organic Solar Cells

  • Oh, Seung-Hwan;Shim, Hee-Sang;Park, Dong-Won;Jeong, Yon-Kil;Lee, Jae-Kwang;Moon, Seung-Hyeon;Kim, Dong-Yu
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2009.11a
    • /
    • pp.394-394
    • /
    • 2009
  • Water solubility of conjugated polymers may offer many applications. Potential applications of water-soluble conjugated polymers include the polymer light-emitting diode and new materials for nano and micro hollow-capsules, and bio- or chemo-sensors. We synthesized neutral polyfluorenes containing bromo-alkyl groups by the palladium catalyzed Suzuki coupling reaction. Bromo-alkyl side groups in neutral polyfluorenes were quaternized by tri-methyl amine solution. The electrochemical and optical properties of water-soluble conjugated polymers are discussed. This novel synthesized water-soluble conjugated polymers were used as a interfacial dipole layer between active layer and metal cathode in polymer solar cell for enhancement of open-circuit voltage (Voc), which is one of the most critical factors in determining device characteristics. We also investigated the device performance of polymer solar cell with different metal cathode such as Al, Ag, Au and Cu. In polymer solar cell, novel cationic water-soluble conjugated polymers were inserted between active layer and high-work function cathode (Al, Ag, Au and Cu).

  • PDF

A Simulation Program for Protection Coordination in the Power Distribution System with Distributed Generators (분산전원 연계 배전계통의 보호협조 정정 프로그램 개발)

  • Kim, Sang-Ok;Seo, In-Yong;Lee, Heung-Ho;Rho, Dae-Seok
    • Journal of the Korea Society for Simulation
    • /
    • v.22 no.1
    • /
    • pp.1-8
    • /
    • 2013
  • A higher penetration of renewable energy sources and adoption of renewable portfolio standard(RPS), the penetration of distributed generators(DGs) into power distribution network is becoming a threat for the safe operation of distribution network. The ground fault current of DGs can cause parasitic trip and mal-trip of protective device in the power distribution network. KEPRI has developed a simulation program for current setting of protective devices in DGs connected distribution network. In this study, we analyzed fault currents of a sample network in two cases, i.e. case 1 is for no DG connection, case 2 for a DG connection. We performed protection coordination for relays installed in the network and analyzed the contribution of a DG.

Geochemical characteristics of sediment, pore water, and headspace gas in the Ulleung Basin (울릉분지 퇴적물, 공극수 및 공기층 가스의 지화학적 특징)

  • Kim, Ji-Hoon;Park, Myong-Ho;Ryu, Byong-Jae;Lee, Young-Joo;Jin, Young-Keun
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2006.06a
    • /
    • pp.373-376
    • /
    • 2006
  • 본 연구의 목적은 동해 울릉분지의 제4기 후기 퇴적물 내의 유기물, 공극수와 메탄의 특징 및 상호작용을 규명하는데 있다. 연구지역에서 채취한 코어퇴적물을 원소 분석한 결과 C/N 및 C/S 비(wt. %)는 퇴적물 내 유기물이 주로 해양조류 기원을 가지고, 일반적인 해양 또는 정체 환경에서 퇴적되어Tdam을 지시한다. 그러나 Rock-Eval 열분석 결과는 유기물 기원이 육상식물(Type III)이고, 열적 성숙단계가 미성숙단계임을 보여준다. 이러한 원소분석과 열분석간의 상반된 결과는 유기물이 침강하는 동안 또는 퇴적 후 이루어진 강한 산화작용에 기인한 것으로 추정된다. 퇴적물 내 공극수의 황산염 농도가 퇴적물의 심도가 증가할수록 감소하며, 감소하는 경향은 크게 두 가지 (적선성, concave down)로 나누어진다. 이는 모든 코어에서 황산엽 환원작용이 일어나고 있음을 지시한다. 또한 직선선의 황산엽농도 구배는 무산소 메탄 산화작용(AMO)의 전형적인 특징이다. 황산염 농도의 수직적 구배를 이용하여 SMI(sulfate-methane interface) 심도를 계산하면, 남부울릉분지의 코어 (03GHP-01, 03GHP-02; <3.5mbsf)가 북부울릉분지 코어(01GHP-05, 01GHP-07, 03GHP-03, 03GHP-04, 03GHP-05; > 6mbsf)보다 낮은 값을 갖는다. 위와 같은 SMI 심도차는 메탄의 상부 분산량과 밀접한 관련있는 것으로 추정된다. 메탄가스의 탄소 안정동위원소 $({\delta}^{13}C)$ 분석값들은 -83.5%o에서 -69.5%o의 범위를 가지고 있고, 이산화탄소 환원작용($CO)_2$ reduction)에 의한 생물 (biogenic) 기원임을 지시한다.

  • PDF

An Evaluation of Heating Performance of the Heat Pump System Using Wasted Heat from Thermal Effluent for Greenhouse Facilities in Jeju (발전소 온배수 폐열을 이용한 제주 시설온실 냉난방용 열펌프 시스템의 난방성능 평가)

  • Moon, Sungbu;Hyun, Myung-Taek;Heo, Jaehyeok;Lee, Dong-Won;Lee, Yeon-Gun
    • Journal of Energy Engineering
    • /
    • v.28 no.1
    • /
    • pp.22-29
    • /
    • 2019
  • A heat pump system using wasted heat from thermal effluent to supply the heating energy can reduce energy consumption and emissions of greenhouse gases by greenhouse facilities nearby. The Jeju National University consortium constructed a heat pump system using the thermal effluent from the Jeju thermal power plant of KOMIPO to provide with cool or hot water to greenhouse facilities located 3 km from the power station. In this paper, the system configuration of the heat pump system was summarized, and the results of operations for demonstration of a heating performance carried out during the winter season in 2018 were investigated. The preoperational tests proved that the water temperature drop through the pipeline transporting extracted heat was less than $2^{\circ}C$. The COP (coefficient of performance) of the heat pump was higher than 4.0, and hot water with the maximum temperature of $50^{\circ}C$ could be supplied to greenhouse facilities by utilizing wasted heat from thermal effluent.

Derivation of Candidate Sites for a Tidal Current-Pumped Storage Hybrid Power Plant Using GIS-based Site Selection Analysis (GIS기반 적지분석을 통한 조류-양수 융합발전시스템 설치후보지 도출 연구)

  • LEE, Cholyoung;CHOI, Hyun-Woo;PARK, Jinsoon;KIM, Jihoon;PARK, Junseok
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.23 no.4
    • /
    • pp.184-207
    • /
    • 2020
  • This study aimed to determine candidate areas for tidal current-pumped storage hybrid power plants using GIS-based site selection analysis. The study area is the southwestern sea surrounding Jindo Island in South Korea. Factors to be considered for the site selection analysis were derived considering the design and installation characteristics of the hybrid power plant. Numerical simulation to predict tidal speed was performed using the MOHID(Modelo HIDrodin?mico) and the results were converted into spatial data. Subsequently, a GIS-based overlay analysis method proposed in this study was applied to derive the installation candidate area. A total of 10 regions were identified as candidate sites. Among them, it was determined that the power generator could be installed in relatively wide sea areas in Jindo, Seongnamdo, and Hajodo.

Long-Term Operation Modeling for the Hydropower Reservoir in the Han River Basin Using Linear Programming (선형계획법을 이용한 한강 수계 수력발전 댐 장기모형 구축)

  • Lee, Eunkyung;Ji, Jungwon;Yi, Jaeeung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.156-156
    • /
    • 2015
  • 최근 화석연료의 사용으로 인한 지구온난화 등 환경파괴가 점점 증가하는 추세이며 이로 인해 신재생에너지 중 하나인 수력발전이 주목받고 있다. 수력발전은 물의 위치에너지를 기계에너지로 이를 다시 전기에너지로 변환하는 친환경적인 방식으로 운영된다. 수력발전량은 우리나라 전체 발전량의 1.5% 정도로 적은 양의 발전량을 생산하지만 가동시간이 짧아 전력수요가 급변하는 상황에 대비 가능하기 때문에 수력발전은 필수적이다. 기후변화의 영향으로 연평균강수량은 증가하는 양상을 보이나 연 강수일수는 줄어드는 등 수자원의 불확실성이 증가하고 있는 실정이다. 따라서 미래 불확실한 수자원 공급에 대비할 수 있는 수자원의 효율적 활용에 대한 연구가 필요하다. 본 연구에서는 하천의 유량이 계절에 따라 변동 폭이 크다는 점을 고려하며 월별 발전량을 최대화하기 위해 선형계획법을 적용하는 모형을 구축하였다. 선형계획법은 목적함수와 제약조건식 모두 1차식으로 비선형항을 포함할 수 없으나 초기 해가 불필요하고 최적해가 보장된다는 장점을 가진다. 일부 목적함수나 제약조건식에 비선형항이 포함되어 있을 경우 Successive Linear Programming(SLP), Piecewise Linear Programming(PLP), Taylor Expansion 등의 방법을 이용하여 선형화할 수 있다. 본 연구에서 비선형 제약조건은 Taylor Expansion을 이용하여 선형화하였으며 한강수계 9개 댐의 월간 발전량을 최대화시키는 장기 운영 모형을 구축하였다. 개발 환경은 Linux-CentOS이며 사용프로그램은 통계 분석에 많이 활용되는 R programming이다. R programming은 패키지를 이용한 개발이 용이하고 Windows 뿐만 아니라 Linux, Mac, Unix 등의 운영체제에서도 호환 가능하다는 장점이 있다.

  • PDF

Performance Analysis of Hydrogen Based Hybrid System Using HOMER - a Case Study in South Korea (수소기반 신재생에너지 복합발전 시스템의 지역별 운영성과 분석 - HOMER를 활용한 사례 연구)

  • LEE, MYOUNG-WON;SON, MINHEE;KIM, KYUNG NAM
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.29 no.6
    • /
    • pp.606-619
    • /
    • 2018
  • This study focuses on the performance of hydrogen energy based hybrid system in terms of system reliability of electricity generation. With this aim to evaluate the off-grid system of photovoltaic (PV), wind turbine, electrolyzer, fuelcell, $H_2$ tank and storage batteries, 14 different sites in South Korea are simulated using HOMER. Performance analysis includes simulation on the different sites, verification of operational behaviors on regional and seasonal basis, and comparison among a control group. The result shows that the generation performance of hydrogen powered fuelcell is greatly affected by geographical change rather than seasonal effect. In addition, as the latitude of the hybrid systems location decrease, renewable power output and penetration ratio (%) increase under constant electrical load. Therefore, the hydrogen based hybrid system creates the stability of electricity generation, which best suits in the southern part of South Korea.