• Culinary science and hospitality research
• /
• v.19 no.3
• /
• pp.194-208
• /
• 2013

This study presented a theoretical research system about the impact of boss' transformational leadership that is recognized by super luxury hotel chefs on their job satisfaction and performance, and on the basis of this theoretical background, the model was derived and the hypothesis was confirmed by empirical research. A frequency analysis was conducted to determine the general characteristics of the 245 samples collected in this study, an exploratory factor analysis for the verification of the validity of boss' transformational leadership, employees' job satisfaction and job performance, and 'Cronbach's a' was used for the verification of reliability. In addition, a canonical correlation analysis was used to determine the relationship between transformational leadership, job satisfaction and job performance, and the influencing relations of variables were verified by running a multiple regression analysis through SPSS ver 18.0 statistical package in order to verify this research model and hypothesis. The results of this study can be summarized as follows: First, it was shown that the transformational leadership charisma (p<0.01) and only the individual concern (p<0.1) had a positive influence on job satisfaction. Second, as a result of understanding the impact of the transformational leadership on the job performance through a regression coefficient, it was shown that only boss' intellectual stimulation had an impact on the chef's job performance (p<0.005). Through the results of an empirical analysis that boss' transformational leadership had a correlation and a significant impact on job satisfaction and job performance, the effort of providing the systematic support and motivational aspects of supporting environment will be needed.

• Journal of the Korean Society for Railway
• /
• v.20 no.3
• /
• pp.311-319
• /
• 2017

The primary suspension system of a railway vehicle restrains the wheelset and the bogie, which greatly affects the dynamic characteristics of the vehicle depending on the stiffness in each direction. In order to improve the dynamic characteristics, different stiffness in each direction is required. However, designing different stiffness in each direction is difficult in the case of a general suspension device. To address this, in this paper, an optimization technique is applied to design different stiffness in each direction by using a conical rubber spring. The optimization is performed by using target and analysis RMS values. Lastly, the final model is proposed by complementing the shape of the weak part of the model. An actual model is developed and the reliability of the optimization model is proved on the basis of a deviation average of about 7.7% compared to the target stiffness through a static load test. In addition, the stiffness value is applied to a multibody dynamics model to analyze the stability and curve performance. The critical speed of the improved model was 190km/h, which was faster than the maximum speed of 110km/h. In addition, the steering performance is improved by 34% compared with the conventional model.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.744-753
• /
• 2021

This study suggests ways to improve the standard test method and judgment criterion for the "Eco-toxicity Test" based on the rules and regulations provided in 'performance and qualifying test standards for marine pollution prevention materials and chemicals' in the Republic of Korea. Compared with the relevant references of other countries, this study attempted to find the limitations in the existing standards. As for the growth inhibition test of algae using Skeletonema costatum as an indicator, applying comparative analysis to measure specific growth rates, together with statistical analysis, instead of applying current methods, judged by the appearance of colors from the culture medium was suggested. Considering the exponential growth phase of the test species, the test duration was suggested to be reduced to less than four days. For the test with fish as an indicator, resetting the appropriate body size was suggested to, show consistent sensitivity against chenicals applied during testing. Furthermore, it is necessary to consider the criteria needs, which should be established in reasonable and objective ways. For the testing species, marine rotifer, Brachionus plicatilis could be a replacement for Artemia sp., and a bivalve for fish in the test. To improve the performance effectiveness of the "Eco-toxicity test", it is worth considering the designation of accredited testing institutes, by placing it in the same loop. Thus it is also expected to have a reliable management system in place, having the capacity of cost calculation properly and adjusting testing items if required.

• Management & Information Systems Review
• /
• v.38 no.3
• /
• pp.171-186
• /
• 2019

The purpose of this study is to identify the effects of entrepreneurship on entrepreneurial efficacy and entrepreneurial intention, and to provide implications for analyzing mediating effects of career decision self-efficacy in bilateral relations. The data were collected from entrepreneurship, entrepreneurship students, and, and 220 students were surveyed. For the empirical analysis, frequency analysis, factor analysis, reliability verification, correlation analysis, and multiple regression analysis were performed using SPSSWIN 21.0. The specific analysis results are as follows. First, in the relationship between entrepreneurship and career decision-making self-efficacy, entrepreneurship has a significant effect on career decision-making self-efficacy. Second, in the relationship between entrepreneurship, entrepreneurship efficacy, and intention of entrepreneurship, entrepreneurship has significant influence on entrepreneurship efficacy and entrepreneurship intention. Third, the mediating effect analysis of career decision self-efficacy in the relationship between entrepreneurship, entrepreneurial efficacy, and entrepreneurship intention showed that all mediated effects were significant. The results of this study should be achieved through a convergence curriculum in which entrepreneurship education and career education can be considered at the entrepreneurial education stage in order to enhance entrepreneurship and intention to influence entrepreneurship and career choice. Practical implications were suggested for more effective education.

• The Journal of Engineering Geology
• /
• v.31 no.2
• /
• pp.187-197
• /
• 2021

Clay mineral content of weathered zone is a key parameter for landslide studies. Electrical resistivity tomography is usually performed to delineate the geometry of complex landslides and to identify the sliding surface. In clay-bearing weathered zone, parallel resistivity Archie equation is employed to investigate the effect of conductivity added (resistivity reduced) by clay minerals of kaolinite and montmorillonite, which is dependent on their specific surface area and cation exchange capacities (CEC). A decrease of overall resistivity and apparent formation factor is observed with increasing pore-water resistivity, significantly in montmorillonite. Formation factor is found decreased with increasing porosity and decreasing cementation factor. Parallel Archie equation was applied to the electrical resistivity data from the test area (Sinjindo-ri, Taean-gun, Chungcheongnam-do, Korea) which experienced land creeping in the year of 2014. A panel test with varying clay-mineral contents provides the best fit section when the theoretical section constructed with the assumed contents approaches the field section, from which the clay-mineral content of the weathered zone is estimated to be approximately 10%. Resistivity interpretation schemes including the clay mineral contents for land creeping studies explored in this paper can be challenged more when porosity, saturation, and pore-water resistivity are provided and they are included in the numerical resistivity modeling.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.211-220
• /
• 2021

Land Surface Temperature (LST) is one of the useful parameters to diagnose the growth and development of crop and to detect crop stress. Unmanned Aerial Vehicle (UAV)-based LST (LSTUAV) can be estimated in the regional spatial scale due to miniaturization of thermal infrared camera and development of UAV. Given that meteorological variable, type of instrument, and surface condition can affect the LSTUAV, the evaluation for accuracy of LSTUAV is required. The purpose of this study is to evaluate the accuracy of LSTUAV using LST measured at ground (LSTGround) under various meteorological conditions and growth phases of garlic crop. To evaluate the accuracy of LSTUAV, Relative humidity (RH), absolute humidity (AH), gust, and vegetation index were considered. Root mean square error (RMSE) after minimizing the bias between LSTUAV and LSTGround was 2.565℃ under above 60% of RH, and it was higher than that of 1.82℃ under the below 60% of RH. Therefore, LSTUAV measurement should be conducted under the below 60% of RH. The error depending on the gust and surface conditions was not statistically significant (p-value < 0.05). LSTUAV had reliable accuracy under the wind speed conditions that allow flight and reflected the crop condition. These results help to comprehend the accuracy of LSTUAV and to utilize it in the agriculture field.

• Journal of Digital Convergence
• /
• v.20 no.3
• /
• pp.325-331
• /
• 2022

As IoT devices are used in various ways in an edge network environment, multiple studies are being conducted that utilizes the information collected from IoT devices in various applications. However, it is not easy to apply accurate IoT data immediately as IoT data collected according to network environment (interference, interference, etc.) are frequently missed or error occurs. In order to minimize mistakes in IoT data collected in an edge network environment, this paper proposes a management technique that ensures the reliability of IoT data by randomly generating signature values of IoT data and allocating only Security Information (SI) values to IoT data in bit form. The proposed technique binds IoT data into a blockchain by applying multiple hash chains to asymmetrically link and process data collected from IoT devices. In this case, the blockchainized IoT data uses a probability function to which a weight is applied according to a correlation index based on deep learning. In addition, the proposed technique can expand and operate grouped IoT data into an n-layer structure to lower the integrity and processing cost of IoT data.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.92-101
• /
• 2020

It is necessary to develop a rational method for evaluating the safety of bridges for the passage of inseparable crane vehicles exceeding the limit weight. In this study, the same method applied to the development of the recently introduced reliability-based highway bridge design code - limit state design method is applied to the calibration of the live load factor for the crane vehicle. Structural analysis was performed on the concrete bridge and the required strengths of the previous design code, the current design code and AASHTO LRFD were compared. When comparing the unfactored live load effect, the live load of the crane was greater than that of the current and previous design code. When comparing the required strength by applying the calibrated live load factor, the previous design code demands the largest strength and the current design code and the crane live load effect yields similar value. The results of safety evaluation of the actual bridges on the candidate route for the crane passage secured the same reliability as the target reliability index required by the design code and the strength of the cross section of the actual bridge is calculated greater than the required strength for the passage of the crane, which confirms the safety for the passage of the crane.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.11 no.2
• /
• pp.150-159
• /
• 2008

Purpose: To assess the relationship between lifestyle and metabolic syndrome in obese children and adolescents. Methods: We retrospectively reviewed the medical records and laboratory results of 109 subjects (7~15 years of age) who visited our pediatric obesity clinic between January 2004 and December 2007. They completed the parent- and self-report questionnaire developed by the Committee on Nutrition of the Korean Pediatric Society to assess lifestyle. The metabolic syndrome was defined as having 3 or more of the following metabolic risk factors: obesity, hypertension, serum triglycerides ${\geq}$110 mg/dL, HDL-cholesterol ${\leq}$40 mg/dL, fasting glucose ${\geq}$110 mg/dL, and insulin ${\geq}20{\mu}IU/mL$. Results: All subjects had at least 1 risk factor (obesity). Sixty-three percent of subjects had 2 or more risk factors, 32% of subjects had 3 or more risk factors, and 10% had 4 or more metabolic risk factors. Hypertriglyceridemia (36%), hypertension (32%), hyperinsulinemia (24%), and HDL-hypocholesterolemia (20%) were observed. Fasting blood glucose levels were normal in all subjects. Hypertension was significantly associated with an unbalanced diet and hyperinsulinemia was significantly associated with parental obesity (p<0.05). Those who ate after 8 PM were at a risk of hypertension (odds ratio, 2.5; 95% CI, 1.0~6.1). Those who did not have a preference for exercise were at a risk of hyperinsulinemia (odds ratio, 10.4; 95% CI, 2~54.1). Those who watched TV for ${\geq}$3 hours/day were at a risk of metabolic syndrome (odds ratio, 4.8; 95% CI, 1.2∼18.8). Conclusion: Lifestyle, such as eating late, no preference for exercise, and TV watching ${\geq}$3 hours/day, were related to metabolic syndrome in obese children and adolescents.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.1 s.52
• /
• pp.79-90
• /
• 1996

The purpose of the study was to determine factors influencing compliance with anti-tuberculosis therapy. The study subjects were 104 tuberculosis patients who have received the initial treatment in 3 health centers of Kyongju-City, Dalseong-Gun in Teagu and Kumi-City. Data were collected between September and October 1995. The patients were classified into the improved group and the non-improved group according to outcomes of 3 month treatment with short-term therapeutic regimen. To find factors influencing compliance with anti-tuberculosis therapy, multiple logistic regression was made. There was no significant differences between the improved group and the non-improved group in sex, age, education level, occupation, family pattern, and habitual change regarding smoking and drinking. The level of knowledge about anti-tuberculosis therapy in the improved group was significantly higher than the non-improved group(p<0.01). Multiple logistic regression analysis revealed that family support for not forgetting medication (p<0.05) wis a predictor of improvement and knowledge about anti-tuberculosis therapy(p=0.054), regularity of medication(p=0.062), and consultation to family, doctor and nurse(p=0.075) were marginal predictors of improvement. Treatment must be given to every patient confirmed as having tuberculosis and must be given free of charge to the patients. The requirements for adequate chemotherapy are prescribed in the correct dosage and taken regularly by the patient for a sufficient period to prevent relapse of the disease after cure. It is suggested that education to the patients should be reinforced and connectedness between patients and tuberculosis control workers and family should be solidated.