• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.3
• /
• pp.217-224
• /
• 2024

This paper proposes an efficient dimension reduction method (DRM) that considers the nonlinearity of the performance functions in reliability-based design optimization (RBDO). The dimension reduction method evaluates the reliability more accurately than the first-order reliability method (FORM) using integration quadrature points and weights. However, its efficiency is hindered as the number of quadrature points increases owing to the need for an additional evaluation of the performance function. In this study, we assessed the nonlinearity of the performance function in RBDO and proposed criteria for determining the number of quadrature points based on the degree of nonlinearity. This approach suggests adjusting the number of quadrature points during each iteration of the RBDO process while maintaining the accuracy of theDRM while improving the computational efficiency. The nonlinearity of the performance function was evaluated using the angle between the vectors used in the maximum probable target point (MPTP) search. Numerical tests were conducted to determine the appropriate number of quadrature points according to the degree of nonlinearity. Through a 2D numerical example, it is confirmed that the proposed method improves the efficiency while maintaining the accuracy of the dimension reduction method or Monte Carlo Simulation (MCS).

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.458-464
• /
• 2020

Calibration of load-resistance factors for the limit state design of perforated caisson breakwaters are presented. Reliability analysis of 12 breakwaters in nationwide ports was conducted. Then, partial safety factors and load-resistance factors were sequentially calculated according to target reliability index. Load resistance factors were optimized to give one set of factor for limit state design of breakwater. The breakwaters were redesigned by using the optimal load resistance factor and verified whether reliability indices larger than the target value. Finally, some load-resistance factors were proposed by changing target reliability index.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.11
• /
• pp.1055-1064
• /
• 2017

Since a device such as a rocket motor requires very high reliability, a reasonable reliability design process is essential. However, Korea has implemented a design method for applying a safety factor to each component. In classic reliability analysis, input variables such as mean and standard deviation, used in the limit state function, are treated as deterministic values. Because the mean and standard deviation are determined by a small amount of data, this approach could lead to inaccurate results. In this study, reliability analysis is performed for bolted joints and o-ring seals, and the Bayesian approach is used to statistically estimate the input variables. The estimated variables and failure probability, calculated by the reliability analysis, are derived in the form of probability distributions.

• Journal of the KSME
• /
• v.31 no.1
• /
• pp.34-42
• /
• 1991

복잡한 형상의 서지 탱크를 CAEDS의 GEOMOD를 이용하여 내부의 리보까지 포함한 용기를 모델링하였으며, 설계 부피를 검사하고 GEOMOD와 GFEM 사이의 직접 데이터 교환을 통하여 구조 해석에 필요한 유한요소를 만들었다. 유한요소법에 최적화 이론을 적용하여 서지탱크의 두께 변화에 따른 응력의 설계 민감도를 구하였으며, 민감도를 근거로 보강 위치 및 국부적인 용기의 두께를 결정하였다. 유한요소법 프로그램(IFES, GFEM)과 솔리드 모델러(GEOMOD), 그리고 최적화 기법(IFES-Optimization)을 모두 통합하여, 최적 설계를 수행함으로써 반복되는 실험에 의한 시간과 경비를 줄임과 동시에 신뢰성 있는 설계방법 및 방향을 제시하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.12
• /
• pp.55-64
• /
• 2016

In this paper bearing capacity and safety margin of shallow foundation on weathered soil ground against shear failure by using current design method of allowable stress design (ASD), load resistance factor design (LRFD) based on reliability analysis and partial safety factor design (PSFD) in Eurocode were estimated and compared to each other. Results of the plate loading test used in construction and design were collected and analysis of probability statistics on soil parameters affecting the bearing capacity of shallow foundation was performed to quantify the uncertainty of them and to investigate the resistance bias factor and covalence of ultimate bearing capacity. For the typical sections of shallow foundation in domestic field as examples, reliability index was obtained by reliability analysis (FORM) and the sensitivity analysis on soil parameters of probability variables was performed to investigate the effect of probability variable on shear failure. From stability analysis for these sections by ASD, LRFD with the target reiability index corresponding to the safety factor used in ASD and PSDF, safety margins were estimated respectively and compared.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.5
• /
• pp.305-318
• /
• 2012

Although the existing performance-based design method for the vertical breakwater evaluates an average sliding distance during an arbitrary time, it does not calculate the probability of the first occurrence of an event exceeding an allowable sliding distance(i.e. the first-passage probability). Designers need information about the probability that the structure is damaged for the first time for not only design but also maintenance and operation of the structure. Therefore, in this study, a time-dependent reliability design method based on a stochastic process is developed to evaluate the first-passage probability of caisson sliding. Caisson sliding can be formulated by the Poisson spike process because both occurrence time and intensity of severe waves causing caisson sliding are random processes. The occurrence rate of severe waves is expressed as a function of the distribution function of sliding distance and mean occurrence rate of severe waves. These values simulated by a performance-based design method are expressed as multivariate regression functions of design variables. As a result, because the distribution function of sliding distance and the mean occurrence rate of severe waves are expressed as functions of significant wave height, caisson width, and water depth, the first-passage probability of caisson sliding can be easily evaluated.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.304-304
• /
• 2000

품질이 우수한 에어콘 제어기 콘트롤라를 생산하기 위해서는 기본적인 설계에서 한층 진보된 설계기법과 광도에 맞는 PCB(Printed Circuit Board)를 선택하여야만 생산성 향상과 안정성을 확보할 수 있다. 이는 설계의 다양한 기법과 전문성을 요구함으로써 해결될 수 있다. 정보화 사회의 구현에 맞추어 전기 및 전자산업의 빠른 속도로 변화함으로써 개발자도 여러 가지 기법과 낑산성, 신뢰성을 고려하여 설계할 수가 있어야 하겠다.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10b
• /
• pp.582-584
• /
• 1998

객체 지향 설계 명세를 대상으로한 시스템의 안전성에 대한 검사를 하여, 표(Table)조작에 기초한 검증법을 제안하였다[4]. 제안한 검증법에서는 전문 분야별로 준비된 안정성 기준(Safety Standard)과 노우하우(Knowhow)를 이용하여, 안전성에 관한 이벤트(Event)와 액션(Action)의 관계표를 작성하였다. 그러나, 많은 실제 개발 현장에서는 실제 존재하는 안전성 기준의 부족 등으로 인하여, 이러한 검증법의 기용이 어렵다는 문제점이 있다. 이에 본 논문에서는 신뢰성 분석의 한 방법인 FTA(Fault Tree Analysis)의 FT(Fault Tree)도를 이용한 안정성 체크리스트(Check list)를 작성하여, 이를 바탕으로 관계표를 작성하는 새로운 방법을 제안하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.575-584
• /
• 2014

In this study, the NREL 5 MW wind turbine tower model was optimized according to the multi-body dynamics and reliability-based design. The mathematical model was defined as a link-joint system including dynamic characteristics derived from Timoshenko's beam theory. For the optimization problem, the sensitivities to variations in the tower thicknesses and inner and outer diameters were acquired and arranged in terms of safety and efficiency according to bending stress and buckling standards. An optimal design was calculated with the advanced first-order second moment method and used to define a finite element model for validation. The finite element model was simulated by static analysis. The relationship between the multi-body dynamic and finite element method throughout the process was investigated, and the optimal model, which had high endurance despite its low mass, was determined.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.239-245
• /
• 2018

The importance of reliability in the development of weapons systems and reliability tests has been emphasized recently. Therefore, this study evaluated a reliability test design method of a bladder type accumulator and proposed a process for reliability test design. To design the reliability test of the accumulator, the main failure modes and failure mechanisms were investigated, and the main stress factors were analyzed to select the appropriate acceleration model. A steady - state reliability test was designed according to the number of samples, and the reliability level and accelerated life test time were calculated according to the acceleration factor computed using the selected acceleration model.