• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.642-649
• /
• 2001

Precision parts and instruments are tested to evaluate performance in development-process and product-step to prement a potential defect due to a failure design. In this paper, Environmental test technology, which is the basis of reliability analysis, is introduced with examples of test criterion, test method for products, encoder and traffic signal controller, and measuring instruments. Recently, as the importance of the environmental test technology is recognised. It is proposed that tranining of test technician and technology of jig design and failure analysis are very essential.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.1-10
• /
• 2011

This is a comparative study of three inertia navigation units and focuses on the verification of reliability about GPS/INS for the SmartUAV(DGNS). Those GPS/INS have been tested using a manned aircraft and an automobile. The comparative aspect of units include details about the GPS positions and the inertia sensor performance. With the flight scenario, the DGNS guarantees the reliability of the navigation operation and performs the flight test for the development of the SmartUAV.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.2
• /
• pp.125-132
• /
• 2018

In this study, a direct tensile test was planned to identify the tensile performance of UHPC, and the irregularity of cracks, which is a problem of the direct tensile test, was complemented through the introduction of notches at the center of a specimen. In this regard, a number of specimens divided by batch to reduce the deviation of direct tensile test values were fabricated to present reference data with respect to highly reliable direct tensile strength values. In addition, the mechanical properties and reliability of the specimens were examined under the curing conditions of the specified design strength of 120MPa for the steel fiber reinforced concrete with 1.5% fiber volume fraction, which is most suitable for the field application. As a result, the deviation of averages by batch between compressive strength and direct tensile strength did not show a large difference, and all cracks occurred within 20mm in the direct tensile test. At the 95% confidence interval of the direct tensile strength, the range was considerably small in the mean and the standard deviation, and there was no significant difference depending on the curing conditions. The results confirmed that a stable direct tensile test was performed, and highly reliable results were obtained through the fabrication of specimens by batch and test progress.

• Proceedings of the Korean Reliability Society Conference
• /
• 2005.06a
• /
• pp.405-420
• /
• 2005

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.6
• /
• pp.21-27
• /
• 2023

Modern naval ships install an Infra-Red Signature Suppression system (IRSS) in their exhaust pipe to reduce infrared signature emitted to the outside. In addition, naval ships are strategic assets with a very long life cycle, so high reliability of the performance of the equipment on board must be guaranteed. Therefore, equipment such as IRSS is evaluated for performance through model testing at the design stage. A variety of measuring instruments are used in IRSS model testing, and the reliability of these instruments must also be guaranteed. In this paper, a study was conducted to evaluate the reliability of measurement equipment used in IRSS model testing. The test equipment and instruments used were a hot gas wind tunnel, pitot tube, digital differential pressure gauge, thermocouple sensor, and digital recorder. As the fan speed of the hot gas wind tunnel increased, the measurement deviation of the flow decreased, and the temperature output of the thermocouple sensor showed differences in response time and stability depending on the method used.

• Journal of the Korean Society for Railway
• /
• v.18 no.3
• /
• pp.186-193
• /
• 2015

In this paper, a reliability growth analysis for a next-generation high-speed train was conducted. First, the high-speed train was decomposed into 6 sub-systems and main equipment of the high-speed train was derived from functional diagrams. Next, failure rates were calculated for each sub-system from the failure data obtained during commissioning tests. Then, reliability growth analysis was conducted for the high-speed train using the Duane model. The results show that activities to increase reliability were carried out throughout the test runs from the reliability growth results.

• Defense and Technology
• /
• no.4 s.254
• /
• pp.30-43
• /
• 2000

시험평가는 무기체계를 획득하는 과정에서 의사결정자에게 필요한 정보를 제공하여 획득과 관련된 위험요소를 식별하여 위험을 감소시키거나 제거하는 위험관리 도구로써의 역할뿐만 아니라 소요군인 수요자에게 무기체계에 대한 신뢰성을 보증하는 역할을 하기 때문에 이의 중요성을 아무리 강조하여도 지나침이 없다. 시험평가 개혁은 획득비용 절감, 획득기간 단축, 무기체계의 신뢰성 제고 등 획득개혁의 핵심요소인 바, 시험평가의 개혁이 곧 획득개혁을 보장할 수 있다.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.7
• /
• pp.161-170
• /
• 2010

For the development of load and resistance factor design, reliability analysis is required to calibrate resistance factors in the framework of reliability theory. The distribution of measured-to-predicted pile resistance ratio was obrained based on only the results of load tests conducted to failure for the assessment of uncertainty regarding pile resistance and used in the conventional reliability analysis. In other words, successful pile load test (piles resisted twice their design loads without failure) results were discarded, and therefore, were not reflected in the reliability analysis. In this paper, a new systematic method based on Bayesian theory is used to update reliability indices of driven steel pipe piles by adding more proof pile load test results, even not conducted to failure, to the prior distribution of pile resistance ratio. Fifty seven static pile load tests performed to failure in Korea were compiled for the construction of prior distribution of pile resistance ratio. The empirical method proposed by Meyerhof is used to calculate the predicted pile resistance. Reliability analyses were performed using the updated distribution of pile resistance ratio. The challenge of this study is that the distribution updates of pile resistance ratio are possible using the load test results even not conducted to failure, and that Bayesian updates are most effective when limited data are available for reliability analysis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.100-100
• /
• 2012

지식경제부의 청정제조기반 산업원천개발사업의 일환으로 진행 중인 "초고진공펌프 개발" 과제 중 제3세부 과제인 "고진공펌프 종합특성평가시스템 설계, 진단기술 개발" 과제에서 진행되고 있는 연구수행결과를 소개한다. 국내 초고진공펌프 개발 수준의 선진화를 위한 기본적인 초석 확립은 현존하는 모든 진공 발생 장치의 국제적 신뢰성이 있는 완벽한 성능평가의 구현에 있다고 할 수 있다. 고진공펌프개발 총괄 과제의 대명제는 "국제적 신뢰성을 가지는 상용화 제품의 완성"이며, 이를 위한 3세부과제의 추진 방향은 기 완료된 1단계 기술개발에 근거한 1세부과제 및 2세부과제와의 유기적인 infra를 통한 성공적인 지원체계 구축 및 상용화 제품 개발 단계의 모든 신뢰성 확보 전략을 수립, 수행하는 것을 골자로 하고 있다. 또한 2단계 사업 추진 동안 제품 개발 주체인 산업체에 모든 개발된 기술을 적용할 수 있는 기반 제공 및 상용화를 위한 성공적인 기술이전도 포함된다. 상용화 개발 완료 후인 Post Project 기간 동안에 발생할 수 있는 모든 지원체계의 구축도 장기간에 걸친 연구 개발의 연장선상에서 추진되어야 될 것으로 예상된다. 세부 추진내용으로 나노팹 공정현장의 고진공펌프 신뢰성평가의 기본 개념설계를 포함한 현장 데이터의 확보 및 분석 현황, 공정현장의 실제 환경에 투입하기 전 단계의 모든 신뢰성 확보 방안, 터보분자펌프의 경우 파괴실험을 포함한 over speed, shock venting, foreign debris dropping test 등 상용화 단계에 필요한 기본 시험평가 조건을 고찰하고자 한다. 상용화 단계의 내구성 및 신뢰성 확보를 위한 전제 조건은 대외적으로 공표할 수 있는 시험 평가 데이터와 개발 주체에서 기밀 수준으로 유지해야만 하는 민감한 자료의 상시 생산 infra의 구축으로 볼 수 있다. 이러한 고진공펌프개발이라는 과제의 대명제를 완성하기 위하여 추진 연구개발 방향 등 진행형인 2년간의 최종 상용화에 필요한 국제 신뢰성, 공정대응성 확보 등 핵심사업 추진내용 및 infra 구축의 상세개발 로드맵을 완성하고자 한다.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.12
• /
• pp.151-159
• /
• 2022

In this paper, we propose the standardization architecture and weapon-sensor simulator for efficient reliability test in combat system. To reduce man-month of reliability test, application with high dependency on other module is selected and apply FORM. The proposed standardization architecture extracts common, variable elements and design patterns, S.O.L.I.D principles were applied. The proposed weapon-sensor simulator implements essential functions by identifying highly dependent element of other modules and the information from equipment can be directly received without processing by using communication middleware. As a result, it can replace actual ship-mounted equipment. In addition, it is possible to reduce the consumption rate of human resources when perform reliability test and modification time can be shorted.