• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.245-255
• /
• 2001

원전 가동전/가동중검사 결과의 신뢰도(reliability)는 원전 배관기기의 건전성에 직결되는 것으로써 결함 발견 시 적용되는 파괴역학해석(FMA)은 비파괴검사 결과에 대한 100%의 신뢰를 전제하고 있다. 그러나 비파괴검사가 어느 정도 신뢰성을 가지고 있는지에 대한 평가가 국내에서는 거의 수행된 바가 없었다. 따라서, 본 연구에서는 원전의 비파괴검사 규제 요건의 기술적 근거를 확보하고, 원전 기기 건전성 평가 및 안전성 향상을 위한 합리적 규제지침을 수립하기 위하여 국내 원전 가동중검사(ISI)에 적용되거나 일반 산업계에 적용되고 있는 초음파탐상검사에 대하여 기량검증 Round Robin Test에 의한 통계적 신뢰도를 평가하고자 한다. 이를 위해 초음파검사 PD-RRT 결과의 통계적 신뢰도 평가 모델을 고찰하고, 결함검출성능 평가, 결함크기 측정 평가, 팀 오차 분석 등 초음파검사 PD-RRT 결과의 통계적 신뢰도를 평가하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.607-611
• /
• 2001

Ultrasonic inspection system consist of the operator, equipment and procedure. The reliability of results in ultrasonic inspection is affected by its ability. Furthermore, the reliability of nondestructive testing is influenced by the inspection environment, materials and types of defect. Therefore, it is very difficult to estimate the reliability of NDT due to the various factors. In this study, the probability of detection by logistic probability model and Monte Carlo simulation is used for the reliability assessment of ultrasonic inspection. The utility of the NDT reliability assesment is verified by the analysis of the data from round robin test nth these models.

• Proceedings of the Korea Contents Association Conference
• /
• 2019.05a
• /
• pp.381-382
• /
• 2019

본 연구는 기능적 뻗기 검사의 측정자 간 신뢰도를 알아보기 위하여 실시하였다. 본 연구에 참가한 대상자는 총 46명(남 20명, 여 26명)이었고 기능적 뻗기 검사는 두 곳의 실험실에서 이루어졌고 측정자는 총 6명이었다. 같은 장소의 실험실에서 이루어진 검사의 측정자간 신뢰도는 높게 나타났으나 장소가 다른 곳에서 이루어진 검사의 측정자 간 신뢰도는 아주 낮게 나타났다. 따라서 기능적 뻗기 검사의 신뢰도를 확보하기 위하여서는 측정자들의 명확한 기준의 정리가 필요할 것으로 보인다.

• Journal of the military operations research society of Korea
• /
• v.32 no.2
• /
• pp.92-113
• /
• 2006

The main purpose of this study is to determine the optimal periodic inspection for Anti-Ship-Missile(Harpoon Block 1) fielding on Korea Navy Ship. In order to perform this study, the data from the Korea Navy (Harpoon maintenance & storage reliability) were collected from 1984 to 2004. Storage failure rate & MTBF for Harpoon block 1 were analysed by using mathematical model & reliability analysis software(Relex) and finally determined optimal periodic inspection. The suggested methodology will be used to determine and reevaluate the periodic inspection of Anti-Ship-Missiles for the Korea Navy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.775-778
• /
• 2017

This research describes system implementation for automatic inspection on wind pressure sensor production based on reliability improvement. The reliability is minimized by the automatic inspection system on the wind pressure sensor against the manual system. The system consists of the control system and monitoring system to be scanning the inspection processing. The inspection system for reliability is evaluated in Gage Repeatability and Reproducibility. The experimental results are improved about 2 times speed, measured error ${\pm}0.02V$, effectiveness 15%, missing probability 17% and false alarm 12% respectively. The system will be also improved by database and the product barcodes for the total quality control system based on the effective reliability in the future.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.668-672
• /
• 2001

The purpose of study was to measure the interrater reliability of the caries diagnostic instrument, Diagnodent(KaVo, Germany), using a new laser fluorescence technique. Occlusal surfaces and smooth surfaces of one hundred extracted human premolars and molars were examined by four dentists. Pearson correlation coeffcients were 0703 to 0.870 for occlusal surfaces and 0.764 to 0.932 for smooth surfaces (P<0.01, all). Reliability coefficients which were calculated by intraclass correlation coefficients were 0.9450 for occlusal surfaces and 0.9605 for smooth surfaces. Therefore, the interrater reliability of caries diagnosis by Diagnodent is very high, and the rater training would be necessary more for occlusal surfaces than for smooth surfaces.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.592-598
• /
• 2017

The purpose of this study is to suggest a new inspection period of ${\triangle}{\triangle}$ guided missiles by analyzing their reliability using field data. The ${\triangle}{\triangle}$ guided missile has an inspection period of five years which was determined using prediction data during its development process. However, from the analysis of its field data, it was shown that the inspection period could be extended to more than 18 years. Based on this result, a policy is proposed to reevaluate the inspection period by means of practical reliability tests.

• Industry Promotion Research
• /
• v.8 no.1
• /
• pp.111-117
• /
• 2023

Sampling inspection methods for quality control have been proposed a lot in the industry. However, the sampling inspection method for reliability, which is a quality over time, has been relatively less presented, and there are not many literatures that are clearly summarized. Therefore, this paper focuses on the reliability conformity test to verify that the reliability evaluation scale value of the target is satisfied during the reliability test. To this end, first, we look at the conditions that both consumers and producers can satisfy in terms of the OC curve and find out what sampling methods satisfy the desired level of producer risk and consumer risk. Next, two methods of the reliability sampling methods such as attribute and variable reliability sampling methods are examined. Specifically, the attribute reliability sampling method is a form of sampling plan where n samples are tested for a certain period of T hours and the lot is accepted if the number of failures is less than or equal to a certain number c. On the other hand, the variable reliability sampling method is a form of sampling plan where the lot is accepted if the reliability evaluation scale such as MTBF satisfies a certain standard. Both sampling plans may also use inspection tables.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.9 no.1
• /
• pp.91-97
• /
• 1998

Objectives：This study was designed for testing of Eating Attitude Test for Korean adolescents (EAT-26KA) on internal reliability and test-retest reliability and evaluation of each items through factor analysis. Methods：Total 1,160 middle and high school students were surveyed on June 1996. The questionnaire had been delivered by school teachers two weeks earlier before survey started. Among the 1,160 students, 114 students were selected by random. And then they were retested with same questionnaire on July 1996, four weeks later Result：Internal consistency of EAT-26KA was relatively good(Cronbach’s ${\alpha}$ =.83). There was statistically significance on test-retest reliability(r=.63 p<.01). But two items showed negative correlations(item No. 9, 17). and 5 items had low level correlation(p>.05, item No. 2, 6, 12, 21, 24). We performed factor analysis on whole items except No. 25 item. Result of factor analysis showed that the factor structure of EAT-26KA were different from that of EAT-26. Conclusion：The EAT-26KA is useful for the survey of the eating behavior and problems in Korean adolescents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4612-4618
• /
• 2012

The purpose of this study was to analyze the reliability and validity of CDT as a screening tool for cognitive impairment for stroke clients living in local community. Two evaluator assessed 51 clients' cognitive function using CDT and K-MMSE from October 2010 to August 2011 year. The researcher analyzed test-retest reliability, interrater reliability, construct validity, construct validity. The test-retest and interrater reliability was higher than .54(p<.01). The construct validity and concurrent validity was statistically significant(p<.01). So, The CDT using productive method and scoring system of Freedman et al., may be applied to screen cognitive impairment of clients with stroke.