• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.3
• /
• pp.388-402
• /
• 2000

The radiation characteristics of leaky antenna from the dielectric-coated conducting cylinder with periodic corrugation are investigated theoretically for the infinite and finite periodic structures. For the infinite periodic structure, mode-matching method is applied. The integral equation is derived for the finite periodic structure by use of the Fourier transform and mode expansion and a simultaneous linear equation is obtained. The influences of the corrugation slot width, corrugation depth, dielectric thickness, cylinder radius, and finite corrugation number on the radiation characteristics (leakage constant, phase constant, and radiation pattern) are investigated. The results of the finite periodic corrugations are compared with those of the infinite extent structure and good agreement is found. To reduce high side lobe levels of the uniform finite periodic structure, tapering process on the beginning and end section of antenna and nonuniform quasi-period slot arrays are considered. Especially, for the corrugation period, width and depth used for a corrugated surface wave antenna, through the proper tapering process, end-fire radiation pattern with reduced side lobe levels is given.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.935-938
• /
• 2002

본 논문은 회전자에 영구자석을 사용한 2극 단상 브러시리스 모타에서의 기동토오크 특성에 관한 연구결과를 소개함에 목적이 있다. 본 논문에서와 같은 구조의 모타에서의 토오크는 전자기력에 의한 기동력과 코깅 토오크에 의한 영향력 두가지로 구분다. 본 논문에서는 기동토오크의 이론적 구조식을 유도하고, 문리 적 운동방정식과 결합하여 기동시 나타나는 특성을 나타내었다. 본 논문의 목적은 보다 보편적인 기동토오크에 의한 회전자의 운동을 구명하고자 함인데, 이 목적을 위하여 일반적 전원으로 사용하는 연속 직류전류가 아니라, 비연속적이고 정현파 형태의 일펄스 반파 전류를 전원으로 사용하였다. 이때 나타나는 임펄스 응답특성은, 전류를 흘렸을 때, 대부분의 경우 모타의 회전자는 전류의 주기와 다른 주기를 가지고 반회전하였다. 모타 회전자의 반전주기는 입력전압, 영구자석의 자화의 강도, 그리고 관성계수 및 마찰 계수와 같은 기계적 상수에 의해 영향을 받는 것을 알수 있는데, 반전주기 속도가 모타의 동기속도와 적절하지 않는 경우, 모타의 회전은 이루어 지지 않거나 심한 흔들림(CHATTERINC)의 현상이 나타남을 발견하였다. 이러한 결과를 바탕으로 모타의 회전자를 동기속도로 구동을 하도록 하기위한 조건을 구하였다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.05a
• /
• pp.85-90
• /
• 1997

시스템의 안전성을 확보하기 위하여 각 부품들은 주기적으로 점검되어야 하고, 필요시 교체되어야 한다. 시스템의 신뢰성은 부품 고장률, 점검주기, 점검시간, 인적오류의 함수이다. 시스템의 너무 잦은 보수점검은 보수시 인적오류가능성을 증대시켜 시스템의 신뢰성을 저하시키는 효과가 있으며, 반면에 너무 긴 주기를 갖는 보수점검도 고장시스템을 적시에 찾아내어 교체하지 못함으로 인하여 시스템의 신뢰성이 감소하게된다. 그러므로 적절한 점검주기와 허용정지시간으로 보수되어야 시스템의 효율성과 안전성을 제고시킬 수 있다. 본 논문에서는 이러한 시스템 신뢰성에 영향을 미치는 요소들을 함수로하는 시스템 신뢰성의 해석식을 유도하였고 유도된 수식을 예제시스템인 가스정압기에 적용하였다. (중략)

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.8 no.2
• /
• pp.67-80
• /
• 1998

논문에서는 프레임릴레이 프로토콜을 사용하는 암호 통신 시스템에 적합한 키 스트림 동기 방식을 제안하였다. 제안된 주소영역의 확장 비트를 이용한 키 스트림 동기 방식은 단위 측정 시간 동안 측정된 프레임릴레이 프로토콜의 주소영역의 확장 비트 정보와 플래그 패턴의 수신률을 이용하여 문턱값보다 적은 경우에 동기 신호와 세션 키를 전송하므로써 종래의 주기적인 동기 방식에서 전송 효율성 저하와 주기적인 상이한 세션 키 발생, 다음 주김까지 동기 이탈 상태로 인한 오류 확산 등의 단점을 해결하였다. 제안된 알고리즘을 데이터 링크 계층의 처리기능을 최소화하여 패킷 망의 고속화가 가능하도록 설계된 프레임릴레이 프로토콜에서 서비스되는 동기식 스트림 암호 통신 시스템에 적용하여 slip rate $10^{-7}$의 환경에서 주기가 Isec인 주기적인 동기 방식에서 요구되는 9.6*10/ sup 6/비트에 비해 6.4*$10^{5}$비트가 소요됨으로써 전송율 측면에서의 성능 향상과 오복호율과 오복호율과 오복호 데이터 비트 측면에서 성능 향상을 얻었다.다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.918-929
• /
• 1999

동기식 스트림 암호통신 방식을 사용하는 암호통신에서는 암/복호화 과정 수행시 암호통신 과정에서 발생하는 사이클슬립으로 인해 키수열의 동기이탈 현상이 발생되고 이로 인해 오복호된 데이타를 얻게된다. 이러한 위험성을 감소하기 위한 방안으로 현재까지 암호문에 동기신호와 세션키를 주기적으로 삽입하여 동기를 이루는 주기적인 동기암호 통신방식을 사용하여 왔다. 본 논문에서는 CDMA(Cellular Division Multiple Access) 이동망에서 데이타서비스를 제공할 때 사용되는 점대점 프로토콜의 주소영역의 특성을 이용하여 단위 측정시간 동안 측정된 주소비트 정보와 플래그 패턴의 수신률을 이용하여 문턱 값보다 작은경우 동기신호와 세션키를 전송하는 비주기적인 동기방식을 사용하므로써 종래의 주기적인 동기방식으로 인한 전송효율성 저하와 주기적인 상이한 세션키 발생 및 다음 주기까지의 동기이탈 상태의 지속으로 인한 오류확산 등의 단점을 해결하였다. 제안된 알고리즘을 링크계층의 점대점 프로토콜(Point to Point Protocol)을 사용하는 CDMA 이동망에서 동기식 스트림 암호 통신방식에 적용시 동기이탈율 10-7의 환경에서 주기가 1sec인 주기적인 동기방식에서 요구되는 6.45x107비트에 비해 3.84x105비트가 소요됨으로써 전송율측면에서의 성능향상과 오복호율과 오복호 데이타 비트측면에서 성능향상을 얻었다. Abstract In the cipher system using the synchronous stream cipher system, encryption / decryption cause the synchronization loss (of key arrangement) by cycle slip, then it makes incorrect decrypted data. To lessen the risk, we have used a periodic synchronous cipher system which achieve synchronization at fixed timesteps by inserting synchronization signal and session key. In this paper, we solved the problem(fault) like the transfer efficiency drops by a periodic synchronous method, the periodic generations of different session key, and the incorrectness increases by continuing synchronization loss in next time step. They are achieved by the transfer of a non-periodic synchronous signal which carries synchronous signal and session key when it is less than the threshold value, analyzing the address field of point-to-point protocol, using the receiving rate of address bits information and flag patterns in the decision duration, in providing data services by CDMA mobile network. When the proposed algorithm is applied to the synchronous stream cipher system using point-to-point protocol, which is used data link level in CDMA mobile network, it has advanced the result in Rerror and Derror and in transmission rate, by the use of 3.84$\times$105bits, not 6.45$\times$107bits required in periodic synchronous method, having lsec time step, in slip rate 10-7.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.4
• /
• pp.67-76
• /
• 2009

Recently, the active interaction control (AIC) system was proposed as a semi-active control system. The AIC system consists of a primary structure and an auxiliary structure. The objective of the AIC system is to control the response of the primary structure through engagement and disengagement between the primary and auxiliary structures. Previous switching control algorithms have been shown to be effective in reducing the response of the primary structure. However, they have the main drawback of requiring an excessive engagement-disengagement frequency and high interaction force. In this paper, the regions in which the switching is activated and the regions in which the switching is deactivated are described separately, to effectively determine the engagement or the disengagement. The general relationship between the switching regions and the deactivated switching regions selected according to the engagement-disengagement conditions is described within the newly-developed comprehensive switching framework. The proposed engagement-disengagement conditions are designed within a comprehensive switching framework, to reduce engagement-disengagement frequency and interaction force. Furthermore, the effect of a control sampling period on the AIC system is explained in terms of the engagement-disengagement frequency. The effectiveness of the proposed algorithms and the effect of the control sampling period are considered for a single degree of freedom model under free vibration. It is observed that increasing the duration of stay by using a large control sampling period prevents the AIC system from activating the possible chance of switching. The proposed algorithms are shown to be effective, both in restricting ineffective switching and in reducing interaction force.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.203-212
• /
• 2008

The cyclic behavior and energy dissipation mechanism of short coupling beams with various reinforcement layouts were studied. For numerical analysis of coupling beams, nonlinear truss model was used. The results of numerical analysis showed that the coupling beams with conventional reinforcement layout showed pinched cyclic behavior without significant energy dissipation, whereas the coupling beams with diagonal reinforcement exhibited stable cyclic behavior without pinching. The energy dissipation of the coupling beams was developed mainly by diagonal reinforcing bars developing large plastic strains rather than concrete which is a brittle material Based on this result, simplified equations for evaluating the energy dissipation of coupling beams were developed. For verification, the predicted energy dissipation was compared with the test results. The results showed that the simplified equations can predict the energy dissipation of short coupling beams with shear span-to-depth ratio less than 1.25 with reasonable precision, addressing various design parameters such as reinforcement layout, shear span-to-depth ratio, and the magnitude of inelastic displacement. The proposed energy equations can be easily applied to performance-based seismic evaluation and design of reinforced concrete structures and members.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.6
• /
• pp.422-428
• /
• 2011

Optimal reliability indices were found by optimizing life cycle cost(LCC) of pier type quay walls. Failure probability of pier and shore bridge were calculated by response surface method. Then, they were used to obtain recovery cost after damage. Costs for initial construction and maintenance were also considered in finding optimal reliability indices. Target reliability indices which may be used in reliability based design were suggested by numerical examples under seismic load and ship load.

• The Journal of Natural Sciences
• /
• v.6 no.1
• /
• pp.79-87
• /
• 1993

In the map of period-doubling bifurcation, stable fixed points bifurcate to $2^n$ fixed points, and in the chaotic region, the chaotic bands merge to 1/$2^n$ bands. In a typical map, the chaotic bands expand to a broad chaotic band during the merging process, so called crisis. In this paper, interior crises appearing during the merging process will be discussed by using our map and will be analyzed the characteristics of the phenomenon by obtaining the Lyapunov Exponents.

• Journal of Korea Multimedia Society
• /
• v.8 no.4
• /
• pp.439-449
• /
• 2005

Distributed main memory database management systems (DMM-DBMSs) store the database in main memories of the participating sites. They provide high performance through fast access to the local databases and high speed communication among the sites. Recently, a lot of research results on DMM- DBMSs has been reported. However, to the best of our knowledge, there is no known research result on the performance of the catalog management schemes for DMM-DBMSs. In this work, we evaluated the performance of the partitioned catalog management schemes through experimental analysis. First, we classified the partitioned catalog management schemes into three categories : Partitioned Catalogs Without Caching (PCWC), Partitioned Catalogs With Incremental Caching (PCWIC), and Partitioned Catalogs With Full Caching (PCWFC). Experiments were conducted by varying the number of sites, the number of terminals per site, buffer size, write query ratio, and local query ratio. Experiments show that PCWFC outperforms the other two schemes in all cases. It also means that the performance of PCWIC gradually increases as time goes by. It should be noted that PCWFC does not guarantee high performance for disk-based distributed DBMSs in cases when the workload of individual site is high, catalog write ratio is high, or remote data objects are accessed very frequently. Main reason that PCWFC outperforms for DMM-DBMSs is that query compilation and remote catalog access can be done in a very high speed, even when the catalogs of the remote data objects are frequently updated.