• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.3
• /
• pp.295-301
• /
• 2008

Bathymetric data collected using a multi-beam echo sounder during marine scientific survey is essential for geologic and oceanographic research works. Accurate measurment of sound velocity profile(SVP) in water-column is important for bathymetric data processing. SVP can vary at different locations during the survey undertaken for wide areas. In addition, an observational error can occur when different equipments(Sound Velocity Profiler, Conductivity Temperature Depth, eXpendable BathyThermograph) are used for measuring SVP at the same water column. In this study, we used an MB-system software to show changes in bathymetry caused by variation of SVP. The analyses showed that the sound velocity(SV) changes due to the depth and thickness of thermocline had more significant effects on the resulting bathymetric data than those of surface mixed layer. The observational errors between SVP measuring instruments did not cause much differneces in the processed bathymetric data. Bathymetric survey line is better to be established to the direction that the change of temperature can be minimize to reduce the variation of SVP during the data acquisition along the survey line.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.803-810
• /
• 2009

This study is conducted to examine spatial variations of Dissolved Organic Matter (DOM) in stream and waste waters of the different watershed areas (agricultural, residential, and industrial complex area) by using fluorescence 3D-EEMs (3 Dimensional Excitation Emission Matrix Spectroscopy). Furthermore, the research investigates the changes of DOM characterization by synchronous and 3D-EEMs during a rainfall event. The characterizations of DOM obtained by 3D-EEMs show two noticeable peaks at humic and protein-like regions. Humic-like substances (HLS) are found in rural and urban areas, and humic and protein-like substances (PLS) are shown in industrial area. According to the fluorescence peak $T_1:C_1$ ratios, it is observed that high amount of HLS was discharged from Banweol Industrial Complex (3TG). Additionally, linear relationships (Regression rate, $r^2$=0.65, $r^2$=0.66) have been shown between PLS (peak $T_1,\;B_1$) and biochemical oxygen demand (BOD), which indicates the impact of sewage. For the rainfall event (30 mm), no remarkable difference of DOM was found at rural area except increment of fluorescence intensity comparing dry period. In contrast, HLS at urban area is highly discharged within 30 minutes from the beginning of rainfall. Also, there are high influences of HLS and PLS within 20 minutes at industrial complex (4TG). Fluorescence 3D-EEMs has not only verifies a watershed of DOM origination but also monitors diffuse and point source impacts.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.753-770
• /
• 2006

In urban areas, groundwater pollution is heavily affected by urbanization with land use types. This study aims to characterize groundwater quality and contamination in Sasang industrial area of Busan Metropolitan City where metalworking, machinery and footwear factories are located. Busan Metropolitan City is the highest in the utilization of groundwater resources among the metropolitan cities in Korea. $K^+,\;Na^+,\;Ca^{2+},\;Mg^{2+},\;Cl^-,\;SO_4^{2-}\;and\;HCO_3^-$ concentrations, and electrical conductivity (EC), total dissolved solids (TDS) and salinity are high in the areas near the Nakdong River. The results are attributed to the influence of salt water which intruded into the coastal sediments during sedimentation. In addition, the dominant chemical type of Ca-Cl indicates the influence of salt water in the geological formations as well as anthropogenic pollution. $SiO_2$ ion is interpreted to originate from both water-silicate mineral reactions and the decomposition of cement concretes. Trichloroethylene (TCE) was detected at 12 sites of total 18 sites. However, tetrachloroethylene (PCE) was detected at f sites and 1.1.1-trichloroethane (TCA) at 3 sites. According to the factor analysis, factor 1 was explained by 49.8%, factor 2 19.8%, and factor 3 11.0% with total 80.6% explanation. pH, TDS, salinity, $Ca^{2+},\;K^+,\;Mg^{2+},\;Na^+,\;Al^{3+},\;As^{3+},\;Cl^-\;and\;Fe^{2+}$ were positively highly loaded to factor 1. The chemical components loaded to factor 1 represent the chemical characteristics of both industrial pollution and influence by salt water. Based on the cluster analysis and distribution pattern of chemical components, the concentration of $Na^+,\;Ca^{2+},\;Cl^-,\;SO_4^{2-}\;K^+,\;and\;Mg^{2+}$ is high in the riverside area of the Nakdong River composed of coastal sediments that is influenced by salt water. The downstream area of the Hakjang Stream is judged to be affected by both salt water and artificial pollution. The other part of the study area is interpreted by anthropogenic pollution.

• The Journal of Korean Society for Radiation Therapy
• /
• v.24 no.2
• /
• pp.107-114
• /
• 2012

Purpose: Unlike the existing linear accelerator with photon, proton therapy produces a number of second radiation due to the kinds of nuclide including neutron that is produced from the interaction with matter, and more attention must be paid on the exposure level of radiation workers for this reason. Therefore, thermoluminescence dosimeter (TLD) that is being widely used to measure radiation was utilized to analyze the exposure level of the radiation workers and propose a basic data about the radiation exposure level during the proton therapy. Materials and Methods: The subjects were radiation workers who worked at the proton therapy center of National Cancer Center and TLD Badge was used to compare the measured data of exposure level. In order to check the dispersion of exposure dose on body parts from the second radiation coming out surrounding the beam line of proton, TLD (width and length: 3 mm each) was attached to on the body spots (lateral canthi, neck, nipples, umbilicus, back, wrists) and retained them for 8 working hours, and the average data was obtained after measuring them for 80 hours. Moreover, in order to look into the dispersion of spatial exposure in the treatment room, TLD was attached on the snout, PPS (Patient Positioning System), Pendant, block closet, DIPS (Digital Image Positioning System), Console, doors and measured its exposure dose level during the working hours per day. Results: As a result of measuring exposure level of TLD Badge of radiation workers, quarterly average was 0.174 mSv, yearly average was 0.543 mSv, and after measuring the exposure level of body spots, it showed that the highest exposed body spot was neck and the lowest exposed body spot was back (the middle point of a line connecting both scapula superior angles). Investigation into the spatial exposure according to the workers' movement revealed that the exposure level was highest near the snout and as the distance becomes distant, it went lower. Conclusion: Even a small amount of exposure will eventually increase cumulative dose and exposure dose on a specific body part can bring health risks if one works in a same location for a long period. Therefore, radiation workers must thoroughly manage exposure dose and try their best to minimize it according to ALARA (As Low As Reasonably Achievable) as the International Commission on Radiological Protection (ICRP) recommends.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.3
• /
• pp.64-75
• /
• 2014

The purpose of this study is to analyze the effects of satisfaction in neighborhood park environments located in the Changwon-si of Gyeongsangnam-do, South Korea, on physical activity, the number of parks used for health improvement, and health levels based on Body Mass Index(BMI). Accordingly, a survey was conducted of 429 nearby residents and users of eight neighborhood parks located in urban areas of Seongsan-gu and Uichang-gu in the Changwon-si. The correlation between the environmental perception of neighborhood parks and physical activity and health, which was observed in the survey results, was analyzed using one-by-one linear regression analysis. By summarizing the study results, it was found that the primary reasons for avoiding park use were lack of time, time and effort required to reach the park(i.e., distance from the park), and lack of facilities within the park. Conversely, the primary reasons for using the park included accessibility, walking or strolling, leisure facilities, trees or shade, and diversity in exercise areas. In the case of park users, walking or strolling was the most common activity in the park. On average, park users walked to the parks for 10 minutes and exercised for an hour at least twice per week. With respect to the physical environment of the parks and surrounding areas, park users showed a high level of satisfaction with the distance between their houses and parks and the street environment. On the contrary, they exhibited low levels of satisfaction with water spaces and sightseeing within the parks. Subsequently, it was shown that the number of people using the parks for physical activities and health improvement was positively influenced(within a 5% significance level) by the intent to use the park for exercise, time spent in the park, satisfaction with park use and health improvement, distance to the park, and the convenience of using the park for the elderly. However, only the health improvement gained from park use was found to exhibit a correlation with BMI at the 10% significance level. Continuous accumulation of practical case studies on physical activities in parks and their health improvement effects is required. Through this, park spaces that are under the threat of reduction or elimination owing to various development plans can be conserved and expanded. Furthermore, such case studies can be used to provide data as the basis for deriving park plans and designs that improve parks' functions as sites of physical activity and health improvement.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.1
• /
• pp.16-28
• /
• 2015

This study is suggested to enlarge the green area and to connect and improve the present green areas by deriving the lines of community greenway using living areas and community spaces close to the life of residence in Nam-gu. The purpose of this paper is to suggest the method of establishing greenway for the formation of community in which the residence can grow the community spirit and love their living space much more. Land-use status, green coverage ratio, and impermeability paving ratio are investigated. The community facilities are classified. The highest is educational facility, which is 7.7%, the green facility is 1.9% and the total area of community facilities which is 21.4%. The total area of Nam-gu is divided into 31 zones in total according to the administrative districts, the mail roads and reserved land of railroad and urban development. The total 20 lines of community greenway lines are chosen and the total length of lines is 18.2km. Finally, the characteristics of community greenway lines are analysed, the characteristics of community greenway lines are overall estimated according to the land-use, the street environment and the community facility. The classification system of community greenway is established on the basis on the function and purpose of greenway, the present status of land-use and the type of community facility. Based on the field investigation, the 6 greenway types are suggested considering the interconnection. The method of establishment of community greenway is suggested according to the principle of function and purpose, the principle of land-use and the principle of use of the facilities. Furthermore, the planting methods suitable to each greenway type are suggested in the building planting case of wall planting, roof planting, veranda planting, etc., and in the complex planting of parks, schools, roads, parking lots and other small areas.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.3
• /
• pp.11-28
• /
• 2021

Due to its size and complex characteristics, it is not often to newly create a large park within an existing urban area. Also, there has been a lack of research on the planting design methodologies for a large park. This study aims to elucidate how ecological ideas can be applied to planting practice from a designer's perspective, and eventually suggest a planting design framework in the actual case, the Central Park in the City of Gwangju. This framework consists of spatial structure of planting area in order to connect and unite the separated green patches, to adapt to the changes of existing vegetation patterns, to maintain the visual continuity of landscape, and to organize the whole open space system. The framework can be provided for the spatial planning and planting design phase in which the landscape designer flexibly uses it with the design intentions as well as with an understanding of the physical, social, and aesthetic characteristics of the site. The significance of this approach is, first that it can maintain ecological and visual consistency of the both existing and introduced landscapes as a whole in spite of its intrinsic complexity and largeness, and second that it can help efficiently respond to the unexpected changes in the landscape. In the case study, comprehensive site analysis is conducted before developing the framework. In particular, wetlands and grasslands have been identified as potential wildlife habitat which critically determines the vegetation patterns of the green area. Accordingly, the lists of plant communities are presented along with the planting scheme for their shape, layout, and relations. The model of the plant community is developed responding to the structure of surrounding natural landscape. However, it is not designed to evolve to a specific plant community, but is rather a conceptual model of ecological potentials. Therefore, the application of the model has great flexibility by using other plant communities as an alternative as long as the characteristics of the communities are appropriate to the physical conditions. Even though this research provides valuable implications for landscape planning and design in the similar circumstances, there are several limitations to be overcome in the further research. First, there needs to be more sufficient field surveys on the wildlife habitats, which would help generate a more concrete planting model. Second, a landscape management plan should be included considering the condition of existing forest, in particular the afforested landscapes. Last, there is a lack of quantitative data for the models of some plant communities.

• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.537-549
• /
• 2007

The characteristics of the mineralization and geology in the northern Mt. Taebaek mining district are found to be similar with those reported from Nevada district where the Carlin-type gold deposit occurs characteristically as repeated metallic ore deposits in space and time. Though two spots of hs and several spots of Sb anomalies were recognized in the Yeongweol area, they have no relationship with any metalliferous mineralization. On the other hand, two spots of As anomaly in the Jeongseon area have shown to be related with metalliferous ore deposits (mainly Ag-Au), and they are closely associated with Sb anomaly. Some elements of altered limestones in the study such as Au, Ag, As, Sb, Cu, Pb, Zn, and Mo area are closely associated together, and are more enriched in the Jeongseon area than in the Yeongweol area. In particular, Sb and As which may reflect the occurrence of the Carlin-type gold deposit are highly enriched. However, the base metals such af Zn and Pb are highly variable according to samples. The patterns of the enrichment factor for Sb and As, as well as those for Ag and Au, are very similar with those reported from the Carlin-type gold deposits in Nevada. These similarities in elemental distribution may imply that hydrothermal ore mineralization in the study areas was possibly originated from a fluid with the characteristics of the Carlin-type gold mineralization found in Nevada, China, and Indonesia. However, the pattern of base metals and Mo are different. This may result from different chemistry and/or mineralogy of host rock in the study areas.

• Journal of Korea Water Resources Association
• /
• v.47 no.6
• /
• pp.537-546
• /
• 2014

Surface image velocimetry was introduced as an efficient and sage alternative to conventional river flow measurement methods during floods. The conventional surface image velocimetry uses a pair of images to estimate velocity fields using cross-correlation analysis. This method is appropriate to analyzing images taken with a short time interval. It, however, has some drawbacks; it takes a while to analyze images for the verage velocity of long time intervals and is prone to include errors or uncertainties due to flow characteristics and/or image taking conditions. Methods using spatio-temporal images, called STIV, were developed to overcome the drawbacks of conventional surface image velocimetry. The grayscale-gradient tensor method, one of various STIVs, has shown to be effectively reducing the analysis time and is fairly insusceptible to any measurement noise. It, unfortunately, can only be applied to the main flow direction. This means that it can not measure any two-dimensional flow field, e.g. flow in the vicinity of river structures and flow around river bends. The present study aimed to develop a new method of analyzing spatio-temporal images in two-dimension using cross-correlation analysis. Unlike the conventional STIV, the developed method can be used to measure two-dimensional flow substantially. The method also has very high spatial resolution and reduces the analysis time. A verification test using artificial images with lid-driven cavity flow showed that the maximum error of the method is less than 10 % and the average error is less than 5 %. This means that the developed scheme seems to be fairly accurate, even for two-dimensional flow.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.481-493
• /
• 2023

In high-density urban areas, the urban heat island effect increases urban temperatures, leading to negative impacts such as worsened air pollution, increased cooling energy consumption, and increased greenhouse gas emissions. In urban environments where it is difficult to secure additional green spaces, rooftop greening is an efficient greenhouse gas reduction strategy. In this study, we not only analyzed the current status of the urban heat island effect but also utilized high-resolution satellite data and spatial information to estimate the available rooftop greening area within the study area. We evaluated the mitigation effect of the urban heat island phenomenon and carbon sequestration capacity through temperature predictions resulting from rooftop greening. To achieve this, we utilized WorldView-2 satellite data to classify land cover in the urban heat island areas of Busan city. We developed a prediction model for temperature changes before and after rooftop greening using machine learning techniques. To assess the degree of urban heat island mitigation due to changes in rooftop greening areas, we constructed a temperature change prediction model with temperature as the dependent variable using the random forest technique. In this process, we built a multiple regression model to derive high-resolution land surface temperatures for training data using Google Earth Engine, combining Landsat-8 and Sentinel-2 satellite data. Additionally, we evaluated carbon sequestration based on rooftop greening areas using a carbon absorption capacity per plant. The results of this study suggest that the developed satellite-based urban heat island assessment and temperature change prediction technology using Random Forest models can be applied to urban heat island-vulnerable areas with potential for expansion.