• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.4-4
• /
• 2023

다국적 제약회사에서 생산되는 제약화합물은 인간의 질병치료 뿐만 아니라 가축의 생산성을 향상시키는 물질으로도 활발하게 생산되는데 육우의 성장을 촉진하는 기능성 화합물들도 많이 있다. 북미에서 생산되는 소고기의 약 80%가 1번 이상의 성장촉진기술들이 활용되고 있다고 보고된다. 고기소로 생산되는 비육우에 적용되는 방법은 크게 피하 이식에 의해 혈류를 타고 성장을 촉진하는 17β-Estradiol과 합성 남성호르몬제인 Trenbolone acetate가 주로 활용되고, 비육후기 사료에 섞어서 급여하는 사료첨가제 형태인 β2-adrenergic agonist 같은 형태로 적용하게 된다. 근육을 성장하는 기술의 작용기전은 많은 선행연구에 의해 밝혀져 있는 반면 천연 알칼로이드 성분들의 기전은 밝혀진 것이 많지 않다. 한방제재들에서 많이 발견되는 알칼로이드 성분들은 생리활성 기능들을 가진 것으로 알려져 있지만, 생산, 수거, 가공, 추출 등의 공정에서 많은 비용이 발생하므로 비육우의 사료화 가능성은 아주 희박하다. 따라서 비용을 최소화 할 수 있는 후보재료를 검색중에 감자부산물을 확보하였고 기능성 물질의 추출과 사료첨가제 화 하여 비육우에 급여시험을 실시하였다. α-solanine과 α-chaconine은 감자의 잎, 과일 및 괴경에서 발견되는 글리코알칼로이드 화합물로, 쥐, 토끼, 닭과 같은 다양한 동물 모델에서 중독성을 가진 물질로 보고 되고 있다. 최근 연구에서는 비육우의 성능을 유도하는 데 사용되는 것으로 나타났다. 한우 송아지 3마리의 사태(Semimembranosus)와 등심(Longissimus Dorci)근육에서 추출된 근육위성 세포(BSC)에 다양한 수준의 α-solanine(control, 0.001, 0.01, 0.1, 1, 10μM)으로 처리해본 결과 근육관련 지표인 MHC2X과 β2-AR의 발현이 높게 나타난 것을 확인했다. 사료급여실험에서는 대조군에 비해 급여군의 등심단면적과 도체중이 향상되는 것을 확인하였다. 결과적으로 감자유래 농산부산물은 한우 비육우의 근육의 성장을 증가시키고, 그 작용기전은 β2-수용체에 작용하여 단백질 합성을 촉진시켜 근육을 축적시키는 것으로 확인하였다. 농산부산물을 이용한 기능성 사료개발은 최근 이슈가 되고 있는 축산분야 탄소저감을 개선할 수 있는 기술로 축산의 업사이클링 기술로 활용 가능하다.

• The Journal of Engineering Geology
• /
• v.29 no.1
• /
• pp.51-68
• /
• 2019

This study performs to evaluate adaptability of seashore filtering type seawater-intake which adapts dua1 filter well alternative for direct seawater-intake. This study varies filter condition of seashore free surface aquifer which is composed of sand layer then installs real size dual filter well and single filter well to evaluate water permeability and proper pumping amount according to filter condition. According to result of step aquifer test, it is analysed that 110.3% synergy effect of water permeability coefficient is happened compare to single filter since dual filter well has better improvement. dual filter has higher water permeability coefficient compare to same pumping amount, this means dual filter has more improved water permeability than single filter. According to analysis result of continuous aquifer test, it is evaluated that dual filter well (SD1200) has higher water permeability than single filter well (SS800) by analysis of water permeability coefficient using monitoring well and gauging well, it is also analysed dual filter has 110.7% synergy effect of water permeability coefficient. As a evaluation result of pumping amount according to analysis of water level dropping rate, it is analysed that dual filter well increased 122.8% pumping amount compare to single filter well when water level dropping is 2.0 m. As a result of calculating proper pumping amount using water level dropping rate, it is analysed that dual filter well shows 136.0% higher pumping amount compare to single filter well. It is evaluated that proper pumping amount has 122.8~160% improvement compare to single filter, pumping amount improvement rate is 139.6% compare to averaged single filter. In other words, about 40% water intake efficiency can be improved by just installation of dual filter compare to normal well. Proper pumping amount of dual filter well using inflection point is 2843.3 L/min and it is evaluated that daily seawater intake amount is about $4,100m^3/day$ (${\fallingdotseq}4094.3m^3/day$) in one hole of dual filter well. Since it is possible to intake plenty of water in one hole, higher adaptability is anticipated. In case of intaking seawater using dual filter well, no worries regarding damages on facilities caused by natural disaster such as severe weather or typhoon, improvement of pollution is anticipated due to seashore sand layer acts like filter. Therefore, It can be alternative of environmental issue for existing seawater intake technique, can save maintenance expenses related to installation fee or damages and has excellent adaptability in economic aspect. The result of this study will be utilized as a basic data of site demonstration test for adaptation of riverside filtered water of upcoming dual filter well and this study is also anticipated to present standard of well design and construction related to riverside filter and seashore filter technique.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.1
• /
• pp.65-74
• /
• 2014

Cemented soils have been widely used in road and dam construction, and recently ground improvement of soft soils. The strength of such cemented soils can be tested by using cored sample or laboratory-prepared specimen through unconfined compression or triaxial tests. It takes time to core a sample or prepare a testing specimen in the laboratory. In a certain situation, it is necessary to determine the in-situ strength of cemented soils very quickly and on time. In this study, the relation between unconfined compressive strength and shear wave velocity was investigated for predicting the in-situ strength of cemented soils. A small cemented specimen with 5 cm in diameter and 10 cm in height was prepared by Nakdong river sand and ordinary Portland cement. Its cement ratios were 4, 8, 12, and 16% and air cured for 7, 14, and 28 days. For recycling of resources, a blast furnace slag was also used with sodium hydroxide as an alkaline activator. The shear wave velocity for cemented soils was measured and then unconfined compressive strength test was carried out. As a cement ratio increased, the shear wave velocity and unconfined compressive strength increased due to increased density and denser structure. The relation between unconfined compressive strength and shear wave velocity increased nonlinearly for cemented soils with less than 16% of cement ratio.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.213-219
• /
• 2003

본 연구에서는 새로운 개념의 건조방법을 연구하여 곡물건조의 변화를 도모하고자 원적외선ㆍ열풍 복합열을 이용한 곡물건조기를 개발하게 되었다. 그 결과를 요약하면 다음과 같다. 가. 방사체길이가 1,680mm일 때 보다 1,470mm일 때가 방사체 표면온도가 높게 나타났고, 안정적인 것으로 나타났다. 열풍온도를 5$0^{\circ}C$로 설정했을 때 방사체의 표면온도분포는 280-29$0^{\circ}C$을 유지하였고, 6$0^{\circ}C$일 때는 30$0^{\circ}C$ 부근에서 유지되는 것을 확인할 수 있었다. 두 조건 모두에서 온도편차는 크게 나타나지 않았으므로 균일 건조가 이루어지는 것을 의미하며, 곡물의 품질저하에 영향을 미치지 않는 것으로 판단된다. 나. 열풍온도 5$0^{\circ}C$, 조사거리 125mm, 방사체 길이 1,470mm에서 방사체 길이방향으로 위치에 따라서 온도편차를 측정했을 때 버너를 기점으로 해서 근거리에서부터 원거리까지 균등 분할하여 5점의 온도를 측정하여 그 변화곡선을 분석한 결과 위치 3에서 온도가 높았고, 계속해서 위치 4, 5, 2, 1순으로 나타났다. 버너의 근거리에서보다 원거리에서 온도가 높게 나타난 것은 원적외선방사체를 통과하는 열풍이 빠져나가도록 되어있는 열풍유동관이 버너 원거리에 위치하고 있어 버너에 불꽃이 점화되면서 열풍이 방사체 끝쪽으로 유동되기 때문이다. 다. 건조실 수직면 길이방향의 온도는 열풍공기가 열풍실에서 유입되는 하단부이 온도가 높게 나타났고, 버너쪽과 송풍기쪽의 온도차는 나타나지 않아 온도분포의 좌우 대칭이 잘 되어 균일 건조가 되는 것으로 판단된다 이러한 현상은 건조실의 수평면에 대해서도 같은 현상이 나타났다. 라. 바닥면에서 상부로 올라갈수록 낮은 온도분포를 나타내고 있는 것은 상부에는 외부공기가 유입되면서 온도가 떨어지는 반면 하부에는 외부공기 유입이 적기 때문으로 사료된다. 또한 열풍실의 길이방향 위치별 온도 분포에서도 같은 현상으로 나타났고, 버너쪽과 송풍기쪽의 온도편차는 나타나지 않아 균일 건조를 기대할 수 있다. 마. 열풍온도를 45$^{\circ}C$로 설정하고 조사거리와 방사체 길이를 각각 119, 1,470mm로 하여 벼의 건조성능시험을 열풍건조기(대비구)와 비교시험 결과 시험구에서 건감률, 건조소요에너지가 각각 0.58%(w.b.), 470kcal/kg - water로 대비구보다 각각 건감율은 23% 높았고, 건조소요에너지는 2%의 절감되었다. 바. 건조기에서 발생되는 소음은 버너쪽 근처에서는 대비구 94.12㏈의 87%에 불과하였으나, 거리가 멀어질수록 차이는 크지 않았다. 이것은 버너에서 멀어질수록 외부적인 요인이 소음에 영향을 미쳤기 때문인 것으로 생각된다. 사. 시작기와 대비구간의 경제성에서 시작기의 구입가격이 20% 비싸기 때문에 시간당 고정비가 높았으나, 건조성능이 우수하여 건조비용이 69,350원/톤으로 대비구보다 14% 절감되는 것으로 나타났다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.383-399
• /
• 2020

Optimizing the spacing of the disc cutter is a key element in the design of the TBM cutter head, which determines the drilling performance of the TBM. The full-scale linear cutting test is known as the most reliable and accurate test for calculating the spacing of the disc cutter, but it has the disadvantage of costly and time-consuming for the full-scale experiment. In this study, through the numerical analysis study based on the discrete element method, the tendency between Specific Energy-S/P ratio according to uniaxial compression strength and penetration depth of rock was analyzed, and the optimum spacing of 17-inch disc cutter was derived. To examine the appropriateness of the numerical analysis model, the rolling force acting on the disc cutter was compared and reviewed with the CSM model. As a result of numerical analysis for the linear cutting test, the rolling force acting on the disc cutter was analyzed to be similar to the rolling force derived from the theoretical formula of the CSM model. From the numerical analysis on 5 UCS cases (50 MPa, 70 MPa, 100 MPa, 150 MPa, 200 MPa), it is found that the range of the optimum spacing of the disc cutter decreases as the rock strength increases. And it can be concluded that 80~100 mm of disc cutter spacing is the optimum range having minimum specific energy regardless of rock strength. This tends to coincide with the optimal spacing of previously reported disk cutters, which underpins the disk cutter spacing calculated through this study.

• Microbiology and Biotechnology Letters
• /
• v.1 no.2
• /
• pp.79-87
• /
• 1973

The superior materials for substitution of bean and red pepper paste were selected through the examination of chemical compositions and the function. The following results were obtained. (1) The enzyme activities were higher in the process of koji manufacturing for brewing bean paste and red pepper paste in barley koji and in corn powder koji, but those of wheat koji were inferior (2) Corn powder was proved as the most excellent substitute, because its components and functioning were the best. (3) In the production of the paste the use of corn powder and bean with equal amount was proved as good as those product of the traditional way of the brewing. (4) By using the corn powder, the production cost can be cut down to 25％ in the production of bean paste, and to 23％ in the production of red pepper paste, comparing with those of traditional brewing products

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.531-538
• /
• 2017

In the case of hydraulic pressure type fuse, we accept or reject certain product lots by considering the number of defective products in the operating pressure test. Generally, this procedure, known as 'The inspection by attributes', has been most commonly used in the field of quality assurance of products. However, the method of inspection by attributes suffers because it tests more samples than inspection by variables. Even though the quality of the products has remained stable in the process condition, the same number of samples is required for every lot, which wastes time and money. This paper suggests that the lot acceptance procedure is changed from inspection by attributes to inspection by variables. We can calculate the statistical tolerance percent of defectives and compare this to the Acceptable Quality Level (AQL) in order to save money and time. It is also easier to monitor and control the quality of products by using the process capability index and x-bar charts. In conclusion, the procedure delivers mutual benefit to both the customer and the producer by securing high quality products and reference data.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.465-472
• /
• 2015

SEEMP (Ship Energy Efficiency Management Plan) guidelines for a ship's GHG reduction include a machinery modification of hull, an installation of energy efficiency enhanced attachment in hardware methods. It is also possible to bring a ship energy efficiency improvement by fuel-efficient operations or in other software methods. Hardware modification or installation on ship can bring financial burdens to a ship company compared to its improvement expectation. On the other hand, Software based energy-saving technology can be applicable on various ship types, and it is also expected high efficiency of ship energy use compared to hardware based technology in perspective of the investment costs and efficiency. In this paper, it is described that the ship handling simulator based evaluation was carried out using representative ship model of bulk, container and VLCC. Simulation environments were separated into 6 conditions according to the sea-state and weather condition, and the operation results were compared with those before and after energy saving system applied The container ship showed the largest FOC save rate after energy saving system applied although the others also showed energy save rate after using the system.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1235-1243
• /
• 2021

Geostationary Ocean Color Imager 2 (GOCI-II) on Geo-KOMPSAT-2 (GK2B)satellite was developed as a mission successor of GOCI on COMS which had been operated for around 10 years since launch in 2010 to observe and monitor ocean color around Korean peninsula. GOCI-II on GK2B was successfully launched in February of 2020 to continue for detection, monitoring, quantification, and prediction of short/long term changes of coastal ocean environment for marine science research and application purpose. GOCI-II had already finished IAC and IOT including early in-orbit calibration and had been handed over to NOSC (National Ocean Satellite Center) in KHOA (Korea Hydrographic and Oceanographic Agency). Radiometric calibration was periodically conducted using on-board solar calibration system in GOCI-II. The final calibrated gain and offset were applied and validated during IOT. And three video parameter sets for one day and 12 video parameter sets for a year was selected and transferred to NOSC for normal operation. Star measurement-based INR (Image Navigation and Registration) navigation filtering and landmark measurement-based image geometric correction were applied to meet the all INR requirements. The GOCI2 INR software was validated through INR IOT. In this paper, status and results of IOT, radiometric calibration and INR of GOCI-II are analysed and described.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.1
• /
• pp.43-53
• /
• 2020

The test conducted in this study was carried out for three years from 2013 to 2015 to investigate the optimal level of seeding amount and nitrogen fertilizer application to cultivate and produce the seeds of rye in Jangsu province, Jeollabuk-do. The variety of forage rye used in this experiment was 'Gogu', developed by National Institute of Crop Science, Suwon, Korea in 2004. The seeding rate was four levels (3, 5, 7 and 9 kg 10a^-1, respectively) while nitrogen fertilized with respective amounts of 0, 3, 6, and 9 kg 10a^-1. In Jangsu, the number of spike per m² and lodging ratio were increasing, while fertility rate, 1 liter weight, 1000-grain weight and seed productivity were decreased by increasing of seeding rate from 3 kg 10a^-1 to 9 kg 10a^-1. There was an increase in the number of spike per m², culm lengh, the number of grain per spike, lodging ratio and seed productivity, while productiove tiller, 1 grain weight, and 1 liter weight were decreased by increasing nitrogen fertilizer level from 3kg 10a^-1 to 9 kg 10a^-1. The best seeding rate and nitrogen fertilizer level for rye seed production were 5 kg and 6 kg 10a^-1, respectively, considering plant lodging, seed and fertilizer reduction and the prevention of pollution by excess fertilization.