• Journal of KIISE:Databases
• /
• v.34 no.1
• /
• pp.70-83
• /
• 2007

Most of works for skyline queries have focused on static data objects. With the advance in mobile applications, however, the need of continuous skyline queries for moving objects has been increasing. To process continuous skyline queries, the 4-phased decision method of skyline regions has been proposed recently. However, it is not feasible for a large number of data because of the high cost of computing skyline regions. To solve this problem, this paper first provides a theoretical analysis of the 4-phased decision method. Then we propose a progressive decision method of skyline regions for the 4-phased decision method, which consists of a distance-based pruning and an extent shrinking of region decision lines. The proposed method can efficiently reduce the cost of the decision of skyline region in the 4-phased decision method. This paper also presents the experimental results to show the effectiveness of the proposed method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.4
• /
• pp.400-403
• /
• 2011

This experiment was carried out to determine the effect of mechanization on lavor-saving in sweetpotato cultivation. The field experiment was conducted from 2005 to 2006 in Mokpo Experiment Station of the National Institute of Crop Science. In order to determine the efficiency of mechanical harvesting, different harvesting methods were compared. Mechanical harvesting method was done as follows: cutting of vines by machine, removal of plastic film mulching, and harvesting by two-row and one-row harvesting system. The result showed harvesting labor was decreased by 66.6% in two-row harvesting. The ratio of damaged sweetpotato by mechanical harvesting decreased by 49.4% in two-row and 38.4% in one-row harvesting compared to conventional method. The total labor cost was saved by 48.2% - 70.4% using mechanical method. In addition, the total income also increased by ca. 62.9% - 81.2%. Thus, it was concluded that mechanical harvesting is more efficient and economical method than conventional one.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.11
• /
• pp.189-196
• /
• 2012

This paper proposes Swap algorithm for solving Dynamic Economic Dispatch (DED) problem. The proposed algorithm initially balances total load demand $P_d$ with total generation ${\Sigma}P_i$ by deactivating a generator with the highest unit generation cost $C_i^{max}/P_i^{max}$. It then swaps generation level $P_i=P_i{\pm}{\Delta}$, (${\Delta}$=1.0, 0.1, 0.01, 0.001) for $P_i=P_i-{\Delta}$, $P_j=P_j+{\Delta}$ provided that $_{max}[F(P_i)-F(P_i-{\Delta})]$ > $_{min}[F(P_j+{\Delta})-F(P_j)]$, $i{\neq}j$. This new algorithm is applied and tested to the experimental data of Dynamic Economic Dispatch problem, demonstrating a considerable reduction in the prevalent heuristic algorithm's optimal generation cost and in the maximization of economic profit.

• Journal of Radiation Protection and Research
• /
• v.14 no.2
• /
• pp.1-9
• /
• 1989

An analytic method for quantitative comparisions between the alternatives for radiation protection optimization is required to aid the decision making process. This paper introduces the dynamic Markov model to evaluate the effect of inservice inspection, testing, and repair activities of the plant on radiation protection. In the example to put the Markov model into practice, the steam generator inspection intervals which minimize expected cost and total exposure dose were determined using the data for Kori-2 unit and foreign plants. The results show that the effect of the radiation exposure on the steam generator inspection interval is determined by the cost rather than the radiation exposure. The Markov model used in the example can be applied easily to the domestic NPPs by replenishing the data and also can be used in evaluating the comparative priority between various alternatives for radiation protection optimization.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1143-1151
• /
• 2013

Reasonable methods are needed to predict the noise level of new/existing roads and to select means of noise reduction. In this study, the noise reduction effects of both soundproof walls and quiet pavements were predicted. The noise reduction effects of quiet pavements were predicted by measurement data obtained using the CPX method in test pavements. The noise reduction effect was predicted by KHTN program when applied to soundproof walls and quiet pavement. As a result, the predicted noise level was similar to the measured one. The design method was suggested by an economic analysis using noise benefit of predicted noise reduction. The research suggests that the optimum alternative has to be determined using noise prediction method and life-cycle cost analysis.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.295-301
• /
• 2010

Flow accelerated corrosion(FAC) of carbon steel pipes in nuclear power plants has been known as one of the major degradation mechanisms. It could have bad influence on the plant reliability and safety. Also detection of FAC is a significant cost to the nuclear power plant because of the need to remove and replace insulation. Recently, the interest of the guided wave testing(GWT) has grown because it allows long range inspection without removing insulation of the pipe except at the probe position. If GWT can be applied to detection of FAC damages, it will can significantly reduce the cost for the inspection of the pipes. The objective of this study was to determine the capability of GWT to identify location of FAC damages. In this paper, three kinds of techniques were used to measure the amplitude ratio between the first and the second welds at the elbow area of mock-ups that contain real FAC damages. As a result, optimal inspection technique and minimum detectability to detect FAC damages drew a conclusion.

• Journal of KIISE:Software and Applications
• /
• v.32 no.8
• /
• pp.704-716
• /
• 2005

Assembling new software systems from Prepared components is an attractive alternative to traditional software development method to reduce development cost and schedule dramatically. However, if separately developed components are tested, integrated and verified with unreasonable effort and high cost, it would not be an effective way to software development. Components are not distributed in the shape of white-box source code so that should be hard to validate and test in new application environment. For solving this problem, built-in tester components are suggested to check the contract-compliance of their server components. If components have various and complex function, built-in tester should be heavy and unflexible to test in composition of components. This paper suggests enhancing automated wrapper technique which substitutes with built-in tester components and shows the usability of the wrapper by design and implementation. Component testing in this way reduces the cost and effort associated with preparation of component testing and makes the various test experiments in components assembly.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.4
• /
• pp.241-245
• /
• 2000

The objective of this work Is to design, fabricate, and characterize pseudo-capacitor using amorphous $MnO_2\;nH_2O$ electrode material. The cyclic voltammogram under 100mV/s scan rate of the material shows the electrochemically stable potential window of 1V and the specific capacitance of 250F/g. The TDMA pulse test result indicates that the TDMA system (2 parallel-pseudo-capacitor systems) has the ohmic voltage drop of 0.22V and the capacitor voltage drop of 0.38V. The total voltage drop of the TDMA system is 0.60V and less than 1V of which value is the maximum voltage drop requirement or the TDMA satellite phone. Also, the TDMA system had the ESR of $55m{\Omega}$ and the capacitance of 105mF. Therefore, it is confirmed that the TDMA system has the application feasibility as load-leveling capacitor for the satellite phone.

• Korean Journal of Plant Resources
• /
• v.12 no.3
• /
• pp.204-208
• /
• 1999

We carried out this study to confirm the possibility of C. wilfordii cultivation using crop as a substitute for stake or net, and tested sit support crops, i.e., soybean, peanut, Perilla frutescens var. acuta Kudo, Job's tears, sorghum, and corn compared with net support. Effects of support crops on growth and root yield of C. wilfordii were as follows. Attracting efficiency of vine showed 94∼100% among crops. The number of branches per plant was 1 or 2 more in p. frutescens var. acuta Kudo, Job's tears, and sorghum support than in net support. Fresh root yield per 10a was 919kg in net support, while it was 717kg in P. frutescens var. acute Kudo, 656kg in Job' tears, and 652kg in sorghum support. However, the problem of decreased yield in these support crops could be overcome by cost saving of staking installation and by harvesting support crops. Therefore, C. wilfordii cultivation using P. frutescens var. acute Kudo, Job's tears, and sorghum as support crops showed most effective in labor and cost saving.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.8
• /
• pp.510-517
• /
• 2014

Recently, Cable communications services are becoming the HDTV to 3DTV, UHDTV broadcasting and 100Mbps to 1Gbps Internet. however existing technologies are limited to provide high-quality broadband services in the HFC network. The network upgrade technologies have some problems that Up/Downsteam frequency extension, Cost of upgrading by using DOCSIS3.1, EPOC and Legacy STB compatibility, Cost of upgrading the network by RFoG, RF overlay PON. This paper propose the RF/PON based gigabit Transmission system in order to provide the 1Gbps internet without using frequency and the Multiscreen to IP devices. After the proposed RF/PON system was developed and implemented, this paper evaluate the performance of RF/PON system for simultaneously real-time braodcasting and 1Gbps internet, Multiscreen service, and so on.