• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.387-392
• /
• 2018

Clinical trials are an important part of developing new medical devices or developing new drugs. However, it takes many time and expense to conduct clinical trials. In order to solve this problem, it define the standard format of the data collected in clinical trials in major countries and in Korea. Clinical trials are also underway in korean medicine to develop new medical devices. If it define the standards for the data we collect in clinical trials, there are likely to be a variety of ways to use them. If it collect and manage various clinical trial data as one standardized data, you will be able to draw various results. Based on these findings, we established a system for collecting and managing integrated data on clinical trials. And let's look at how to use it.

• Journal of Platform Technology
• /
• v.8 no.4
• /
• pp.47-58
• /
• 2020

DO-330 Software Tool Qualification Considerations is a guideline for development of tools used to develop/verify software and hardware installed on aircraft. And among several processes, the verification process is very crucial as it occupies a large proportion for DO-330. Especially, in order to qualify tool with high safety level, test objectives must be performed with independence, accordingly, more time, cost, and manpower are required than other objectives. In addition, even if the test cases or test procedures are well defined, the higher the complexity of the test the higher probability of human error occurs. In this paper, we propose Script-based Test Automation Agent software structure for efficient DO-330 verification process of A661UAGEN tool developed by Hanwha Systems. Compared to the test performed manually by the test engineer, testing time of the Script-based Test Automation Agent is reduced by 87.5% and testing productivity is increased by 43.75%.

• KEPCO Journal on Electric Power and Energy
• /
• v.4 no.1
• /
• pp.19-24
• /
• 2018

The long-term research and development for the production of domestic blades has been consistently performed. As the direct and indirect results of its nationwide technologies in precision casting have been improved as well as maintenance costs for turbine machinery has been reduced. Whereas, there are still not a few concerns about the reliability of newly manufactured blades in spite of the quality certificate in metallurgical and mechanical properties. A spin tester is a machine that gives centrifugal loading to a rotating part, and its practical application is the overspeed test that is usually used to check the quality of products. A new spin rig has been constructed in KEPCO Research Institute for the purpose of evaluating the reliability of blades. In this paper, the test methodology for low cycle fatigue damage mechanism as well as the overspeed test for newly developed blades is described, and their reliability is evaluated too.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.5
• /
• pp.1211-1220
• /
• 1997

Testing ineroperability among various impiementations provided by multi- vendors is not only cistly costly but also inpossible in many real situations. The comformance testing and it's extended testing methodologies are not suf- ficient to effectively guarantee the interoperability.This paper proposes an approach to the protocol interperability test based on a real-time object model which successfully abstracts compunents of real-time systens such as communication networks.In this approach,IUT (Implementation Under Test)and the testing environment are represented by means of the RTO.k model and the resultant objests are executed on the DREAM kemel with local monitors and s global monitor.The local monitors obeserve and control the events,and the global monitor manages the call control protocol of B-ISDN UNI Q.2931 as an example.It indicated that high fault coverage could be obtained with this approach.

• Geotechnical Engineering
• /
• v.13 no.5
• /
• pp.145-154
• /
• 1997

Though the static pile load tests gives the mosts accurate estimation on the load carrying capacity of tested pile, it appears time-consuming and not economical. Many test methods using equipments, such as Pile Driving Analyzer(PDA), STATNAMIC, and Osterberg cell, have been introduced in Korea, and pile best using PDA has been gaining popularity because of iris fast and simple operation. Static and dynamic tests results on the piles installed in the granular coils were analyzed to investigate the effect of geometrical damping on the estimated load carrying capacity. It was found that the CAPWAP analysis without considering geometrical damping effect underestimates the pile capacity by 30~60% under certain conditions. It was observed that the underestimation of pile capacity by CAPWAP occurs on the piles installed in the water-borne granular boils by SIP methods. When Smith skin damping value(SSkn) greater than 1.0 sec/m is obtained in CAPWAP analysis, it may reflect the large possibility of underestimation of pile capacity. The introduction of the geometircal damping option in CAPWAP analysis gives reasonable pile capacity, compared with the static pile load test results, and reduces the SSb value under 0.7 sec/m.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.927-935
• /
• 2011

In-situ California Bearing Ratio(CBR) test has been widely used for evaluating the subgrade condition in pavements. However, because the in-situ CBR test is expensive and takes time for operation, it is difficult to figure out the in-situ characteristics of subgrade strength in detail. For faster and economical operation, the Dynamic Cone Penetrometer(DCP) has been often utilized for estimating the subgrade strength in the field. The purpose of this paper is to determine the relationship between CBR value and DCP index of the embankment constructed with mixtures of soil and waste lime. Waste lime used in this study is producted as a by-product in the manufacturing process of making $Na_2CO_3$ from local chemical factory in Incheon. In this field measurement, the geotechnical tests such as field water content, field density, field CBR test, and dynamic cone penetration test were conducted.

• Journal of the Korea Society for Simulation
• /
• v.27 no.1
• /
• pp.111-117
• /
• 2018

It is indispensable for a missile to track a target under the flight condition since the tracking capability affects the system performance considerably. The best way to verify the tracker's performance is flight test while it costs too much. Consequently, captive flight test or CFT has an important role in the development of a missile system. CFT, however, cannot simulate missile dynamics and is an offline and open-loop test. In this paper, we propose a new integrated-flight simulation(IFS) method using CFT imagery to overcome the limitation of synthetic image-based IFS method. This method increases the utilization of CFT's outputs and compensates the reality of imagery which lacks in the synthetic image-based IFS. Using this method make it possible to verify the system capability in various simulation modes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.4
• /
• pp.345-358
• /
• 2018

The high altitude scientific balloon has been used for decades in advanced aerospace countries such as United States, France, and Japan to carry out various research objectives. Since the initial cost for development and operation is enormous, it has been conducted by national research institutes. Recently, the advent of open source software/hardware ecosystems with low-cost yet high-performance have lowered barriers to enter into scientific balloon research and development. In this study, a zero pressure balloon prototype was designed considering the cost, usability, compatibility, and development period by using commercial off the shelf (COTS) items. In addition, the flight operation experience was accumulated through eight times of the flight tests, and operational reliability of the balloon system was verified. Finally, the foundation for the operation of the large zero pressure balloon was established.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.1
• /
• pp.37-42
• /
• 1978

In other to find out the effect of N.K compound fertilizers, 17-0-17 and 17-0-14, a field experiment was conducted with rice (Oryza sativa L. Akibare). Results obtained were summarized as fellows: 1. The effect of compound fertilizer on the yield of paddy and nutrient uptake was not much differed from that of Urea and Muriate potassium. 2. It seemed that the compound fertilizer, 17-0-17, was rather pertinent for the top dressing at effective tillering stage than that at primodial stage, for its slow effectiveness. 3. From the viewpoint of increasing paddy yield and nutrients uptake as well as the exchangeable potassium content of soil after harvesting, it seemed necessary to give a serious consideration to the development of such a compound fertilizer as used in this experiment which was prepared by the Chosen Fertilizer Industrial Cooporation on a trial base.

• Journal of KIISE:Software and Applications
• /
• v.36 no.1
• /
• pp.10-20
• /
• 2009

As unit testing should be performed repeatedly and continuously, it is a high-cost software development activity. Although there are many studies on unit test automation, there are less studies on automated test case generation which are worthy of note. In this paper, we discuss a study on automated test data generation from source codes and indicate algorithms for each stage. We also show some issues of test data generation and introduce an automated test data generating tool: CUTIG. As CUTIG generates test data not from require specifications but from source codes, software developers could generate test data when specifications are insufficient or discord with real implementation. Moreover we hope that the tool could help software developers to reduce cost for test data preparation.