• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3C
• /
• pp.103-108
• /
• 2011

In this study, the limitations of large strain resonant column and torsional shear tests apparatus are described and solutions to the limitations are also described. The limitations are rotational distance, limited torque, and measurable deformation system, respectively. To resolve the rotational distance, the bottom platen was modified. And the four-armed drive plate was modified into eight-armed drive plate and the drive coil connection was changed to obtain powerful torque.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.155-158
• /
• 2007

As a secondary stage of the liquid rocket engine development test, turbopump-gas generator powerpack tests are being performed. The schematics of the test hardware and the test facility for the TP+GG coupled test are presented. The results of a preliminary test results for the verification of the propellant supply system of the test facility are also presented. Based on the preliminary tests results, the verification of the propellants supply systems of the facility system was performed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.125-128
• /
• 2008

As a interstage of the 30tonf level LOx/kerosene liquid rocket engine development, turbopump-gas generator open-loop coupled tests are performed. Test schematic and test results of open-loop coupled tests are presented. In engine system operation environment simulating combustion chamber by flow control orifice, chill-down procedure, startup characteristics, nominal operability of turbopump+gas generator open-loop coupled Test Plant are confirmed The results of open-loop coupled test were used for the preparation on turbopump+gas generator closed-loop test.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1320-1329
• /
• 1990

A static performance tester for a torque rod assembly was developed to evaluate the three characteristics of the rod rubber bushing : radial spring characteristic, thrust spring characteristic, and rotational torque characteristic. Among the various schemes considered in the conceptual design stage, the final versatile type was determined to perform three different tests in one machine. The performance testing machine carried out radial spring test, thrust spring test, and torque test of the torque rod assembly. Static performance of the torque rod assembly was evaluated with the tester developed and fatigue strength of the assembly was also tested with the servo-hydraulic structural fatigue testing machine. The life of the component was found to be related with the rubber quality and adhesionability between the rubber and the steel rod. The optimum rubber hardness was experimentally found by changing the chemical compositions of rubber, and the adhesion was improved by optimizing the shape of the outer section of a the rubber, this study ensured the development of a reliable torque rod assembly.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.97-103
• /
• 2002

The assessment of the condition of a transformer winding which is suspected of having suffered short circuit damage can be difficult. Conventional test such as winding resistance, magnetic current or insulation resistance will only detect damage if a permanent electrical fault exists. Visual inspection of windings necessitates the removal of oil and in many cases only a very small proportion of the winding can be seen. We describe the characteristic of LVI test system and methods to detect the deformation of windings in the power transformers. As the front rise time of recurrent-surge generator pulse less than 1000 ㎱ and the peak value of pulse is about 500 V, we have the good results of detecting winding deformation in the LVI test of transformers.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.25-25
• /
• 1998

진동시험기를 사용한 충격시험은 자유 낙하식 충격시험기를 이용하는 것 보다 여러 가지 장점이 있으며, 충격반응 스펙트럼 시험의 요구가 점점 증가하고 있다. 진동시험기를 이용하여 충격반응 스펙트럼 시험을 실시하는데 진동시험기에서 허용하는 최대 힘, 속도, 변위에 의하여 제약을 받게 된다. 충격반응 스펙트럼을 만족하는 충격파형은 무수히 많으나 최대 가속도, 속도, 변위 등이 작으면 작을수록 그 충격파형의 품질이 우수하다고 말할 수 있다. 충격 지속시간이 짧고 충격가속도의 최대치가 큰 충격파형을 인가할 수 없지만, 충격 지속시간이 보다 길고 충격가속도의 최대치가 작은 파형이 동일한 충격반응 스펙트럼 규격을 만족할 수 있다. 진동시험기를 사용하여 충격반응 스펙트럼 시험을 수행하기 위한 충격파형이 웨이브레트를 이용하여 시험규격의 충격반응 스펙트럼을 만족하도록 합성된다. 웨이브레트의 매개변수는 주파수, 반파의 개수, 지연시간, 극성이다. 각 웨이브레트의 진폭은 시험규격의 충격반응 스펙트럼을 만족하도록·반복적으로 조절된다. 이렇게 합성된 충격파형은 진동시험기를 사용한 충격반응 스펙트럼 시험의 참조 가속도 파형으로 간주된다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.13-13
• /
• 2017

선회시스템의 수명을 정확히 예측하기 위해서는 굴삭기의 상부회전체 및 선회시스템의 모든 구성요소들의 질량관성모멘트를 고려하여 선회감속기의 수명 평가를 수행해야 한다. 선회감속기의 수명 평가방법은 주로 실험실 시험으로 수행이 되며, 시험 장비는 장비 구축 편의성과 비용 등의 이유로 증속기와 굴삭기 상부회전체의 등가 관성체 등으로 구성된다. 굴삭기 선회시스템의 정확한 등가 실험실 시험을 위해서는 시험에 사용되는 등가 관성체의 관성모멘트를 정확히 결정하는 것이 매우 중요하다. 본 연구는 굴삭기 선회시스템의 등가 실험실 시험을 위해 굴삭기 상부회전체의 관성모멘트를 결정하기 위하여 수행되었다. 굴삭기 선회 시험을 통하여 선회감속기 입력 속도 및 토크를 측정하였고, 반복계산법을 이용하여 굴삭기 상부 회전체의 등가관성모멘트를 계산하였다. 굴삭기 상부회전체의 시뮬레이션 모델을 개발하여 선회 시험 결과와 시뮬레이션 모델 비교 분석을 통해 굴삭기 시뮬레이션 모델을 검증하고, 검증된 모델을 이용하여 상부회전체의 관성모멘트가 반영된 등가 실험실 시험 시뮬레이션 모델을 개발하였다.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.19-25
• /
• 2009

This paper includes test results of 30tonf-level TP+GG startup simulation cold flow test using liquid oxygen and kerosene. Test objectives, coupled test plant configuration, test condition, test procedure of performed tests, and test results are presented.

• Electric Engineers Magazine
• /
• v.187 no.3
• /
• pp.42-49
• /
• 1998

드문 경우이긴 하지만 설치 후 절연강도에 대한 전력용변압기의 운전 적합성을 판단하고 있다면 부분방전의 존재를 검출하기 위해 이 시험을 실시하는 경우가 있다. 이 시험은 보수나 수정작업이 실시된 변압기에 실시할 수도 있다. 일반적으로 유도전압시험은 대용량 초고압변압기에만 실시하는 것으로 알려져 있으나 모든 변압기에 실시할 수 있는 시험이다.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.2
• /
• pp.137-144
• /
• 2005

A direct shear test is classified roughly by one side simple shear test of confining horizontal displacement type and torsional shear test of non-confining one. Direct shear test that has been widely used so far has some problems with test apparatus, testing and the analysis, and in particular that its strength value is everestimated in sandy soils. Also, progressive failure of shearing process happens from shear apparatus restriction and because the shear strain and shear stress are erratic in specimen, we can not define the shear strain value. In the meantime, a simple shear test having advantage of direct shear test is an ideal test method that can get stress-strain relation on shear because it can deliver constant shearing deformation to specimen. However, simple shear test cannot be used practically, because its structure makes tester manufacturing difficult. This paper described a on outline of test apparatus, improvement of test method, and constant pressure test results based on the obtained from improved direct shear apparatus and the standardization of JGS soil testing method.