• Science of Emotion and Sensibility
• /
• v.16 no.3
• /
• pp.387-396
• /
• 2013

In this study, the influence of classroom smells (foot odor, hair smell, sour smell, and sweat smell) of male high school and sweat smell and the offensive odor substance (ammonia and butyric acid) on the electroencephalography (EEG) activities of 20 female volunteers, ranging in age from 30 to 50 were studied. The representative response of brainwave index by these smells stimuli was most pronounced on temporal lobes among the brain lobes. By comparison with background EEG activities on temporal lobes, the smells reduced the relative alpha band power (0.04~0.13) and increased the relative beta band power (0.02~0.06) and the relative gamma band power (0.03~0.09). The alpha wave was deactivated, high beta (18~30Hz) and gamma (30~50Hz) waves were remarkably activated. The order of EEG fluctuation caused by the smell stimulus is as follows; hair smell > butyric acid > foot odor, sour smell > ammonia > sweat smell. It means that the classroom smells cause an excessive brain arousal and straining and may be reducing one's attention and learning ability.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.62-62
• /
• 2012

지구온난화 및 환경오염의 영향으로 선진국을 중심으로한 환경규제가 심해지면서, 홈 텍스타일 분야에서는 세계 패션 트렌드 및 소비자 선호에 부응한 친환경 섬유소재 개발, 웰빙 시대에 적합한 기능성 및 고감성 제품개발을 통한 차별화가 요구되고 있다. 최근의 섬유산업의 동향도 인체에 무해한 천연적인 섬유소재에 많은 관심이 증대됨에 따라 개인의 건강 뿐만 아니라 환경을 생각하는 생활패턴인 친환경섬유의 개발이 새로운 트렌드로 떠오르고 있는 실정이다. 헴프는 일년생 식물로서 학명은 Cannabis sativa L.이다. 헴프섬유의 장점으로 내구성 및 내수성, 항균성 등이 우수한 것으로 보고되고 있으나 양질의 원료 확보, 세섬도 추출 기술 및 combing 기술 등의 부족으로 100% 헴프 세 번수 방적사의 제조가 어려워 주로 면섬유와의 혼합소재로 제조되어 왔다. 최근 들어, 친환경 소재로서 박테리아 성장 억제 기능을 가진 재생섬유인 Tencel 소재를 이용하여 stiff한 Hemp의 성질에 유연성을 추가하여 촉감을 개선함과 동시에, Tencel과 Hemp를 혼용함으로써 soft touch부터 harsh touch까지 혼용율에 의한 다양한 감성을 느끼게 함으로써 용도의 다양화 추구가 시도되어 왔다. Hemp의 거친 느낌을 완화시키고 Tencel의 박테리아 억제 기능과 Hemp의 항균기능, 방충, 탈취기능이 상호 보완되어 친환경적이고 위생적인 다용도 홈 인테리어 및 가구용 직물 등의 제품으로 Hemp/Tencel 복합사가 많이 사용되고 있다. 본 연구는 Hemp와 Tencel의 혼용율의 변화에 따른 복합사의 물리적 특성을 확인하기 위하여 천연복합 태번수 방적사 최적 사설계 이론을 적용하여 Hemp 섬유 혼용율에 따른 사의 물성분석을 함으로써 Hemp/Tencel 방적사 최적 공정 조건을 결정하기 위한 사설계 이론 결과와 실험결과를 비교 분석하고자 한다. 최적 천연 Hemp복합방적사 사설계의 이론화 및 사 물성 DB화 그리고 태번수 Hemp사의 물성분석 및 이들을 DB화 함으로써 가구용 직물로 많이 사용되는 친환경 Hemp 소재사의 방적성 향상을 꾀하고자 한다. 이를 위해서 제조한 방적사의 Dry heat shrinkage와 Wet heat shrinkage를 측정하여 확인하였고 인장시험기를 이용하여 Tenacity, Initial Modulus, breaking strain을 측정 분석하였다. 방적사의 표면 특성은 영상 현미경 시스템을 사용하여 ${\times}40$ 배율로 측정하여 확인하였다.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.7-16
• /
• 2011

This is a study on operation system's application method for leading-in public bike operation system through researching on case study at home and abroad, and situation research in Naju city. In the 1st research, studied about the main problems showed at application cases of public bike system at domestic and overseas, such as using time, danger for be stolen and damaged. 2nd research focuses on necessarily of leading-in operation system to be used easily by city residents and travelers of Naju City which is the scheduled city for leading-in public bike system. 3rd research is on the basis of the result showed in 1st and 2nd research, supplied some problems' solving method for France Veblib System, such as lending and rental process using mobile, system operation process, communication process. Also, supplied the application method for problems showed at 1st and 2nd research and civil service proposal. The leading-in method study on public bike operation system was done through above research, also case study at home and abroad, situation study, and rental program module development, and this operation system is worked as an model operation system in Naju City. The future study of leading-in operation system will be more effective by means of summing up test running result.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.67-78
• /
• 2022

Interest in bio-signal monitoring of wearable devices is increasing significantly as the next generation needs to develop new devices to dominate the global market of the information and communication technology industry. Accordingly, this research developed a resistive textile strain sensor through a wetting process in a single-wall carbon nanotube dispersion solution using an E-Band with low hysteresis. To measure the resistance signal in the E-Band to which electrical conductivity is applied, a universal material tester, an Arduino, and LCR meters that are microcontroller units were used to measure the resistance change according to the tensile change. To effectively handle various noises generated due to the characteristics of the fabric textile strain sensor, the filter performance of the sensor was evaluated using the moving average filter, Savitsky-Golay filter, and intermediate filters of signal processing. As a result, the reliability of the filtering result of the moving average filter was at least 89.82% with a maximum of 97.87%, and moving average filtering was suitable as the noise filtering method of the textile strain sensor.

• Science of Emotion and Sensibility
• /
• v.24 no.4
• /
• pp.117-128
• /
• 2021

In this work, we study smart gloves that can prevent carpal tunnel syndrome when using a mouse. Because the left and right wrist movements are fine, a tensile fabric sensor with a large gauge factor and low hysteresis was required before the study. A universal testing machine was used to calculate each gauge rate on four different fabrics, and the fabric with the least hysteresis was selected. In addition, three attachment methods were analyzed using Arduino to select a method with a large sensor value change. For prototypes made by attaching to the selected fabric, data patterns were analyzed using Arduino. The first method identifies only one sensor (A sensor), and the second identifies two sensors (A and B sensors). When the wrist is bent to the right, tensile fabric sensors are attached to both the left (A sensor) and right (B sensor) sides of the wrist, the A sensor is strained, increasing the △sensor value, and the B sensor is relaxed, decreasing the △sensor value. However, when the wrist was bent to the left, the pattern was analyzed in the opposite direction. Through this study, we examined smart gloves to prevent carpal tunnel syndrome with an algorithm that turns on the LED when the wrist is bent, and based on the results of this study, we will directly use mice on 10 people to identify problems and solve problems when used.

• Science of Emotion and Sensibility
• /
• v.25 no.3
• /
• pp.77-90
• /
• 2022

This study seeks to develop a stretch sensor for measuring the wrist movements of people using fishing lures. In order to confirm wrist movement, a stretch sensor was attached to the wrist band, and measurements of the dorsiflexion, plantar flexion, and fishing landing motion were measured using a scale to gauge factor, tensile strength, and elongation recovery rate. A conductive sensor using CNT dispersion was developed and applied to the E-band under the same conditions. A total of 15 sensors of the same size and five types of impregnation once, twice, and three times each were used to measure the gauge factor using UTM. The sensor that was impregnated twice had the best gauge rate, and the prototypes were manufactured with three sensors with high gauge rates and tensile strength. The results of the operation test conducted by connecting to the Arduino showed that Sample 1, which had the highest tensile strength and gauge factor, had a stable graph wavelength in three operations. Samples 2 and 3 showed stable wavelengths in the dorsiflexion and the plantar flexion; however, signal noise appeared in the fishing landing motion. This showed stable wavelengths in the two motions, but the wavelengths of the graphs differ depending on the tensile strength and gauge factor in the fishing landing motion. As a result, it was possible to identify the conditions necessary for manufacturing a stretch sensor for measuring wrist movement. This study will contribute to the development of smart wearable products for lure fishing.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.6
• /
• pp.120-131
• /
• 2019

Recently, the level of fine dust and ultrafine dust has reached its highest level, threatening the public's health. If the air purifier was not operated indoors, natural ventilation would not be possible. In this study, photocatalyst is applied to building materials to purify air in a passive manner. In order to use photocatalyst for LEFC(Light Emotion Friendly Concrete), it is necessary to secure self-consolidating capability. Therefore, self-consolidating performance was evaluated by slump test, J-ring test and L-box test with UHPC materials applied. Based on these results, the mixture proportion was determined, and the mechanical performance was evaluated by compressive and flexural tests. Concrete blocks were constructed with a fabrication method that improved the existing process of making LEFC. Also, the concrete block was emptied as a way to reduce the use of expensive photocatalyst. Finally, in order to identify the distribution of TiO₂, an EDS analysis was performed.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.309-316
• /
• 2018

Various studies have been conducted to improve the BSR (Buzz, Squeak, Rattle) noise generated irregularly while the vehicle is running. In vehicle, When an external force such as vibration or force flows into the contact surface, BSR noise is generated at the contact surfaces of nearby components. In this paper, BSR conceptually explain the kind of noise generation mechanisms and the basic principles of generation, which have been proven by observing and improving noise phenomena in automobiles over the last 10 years. Through this, it is expected that researchers who want to study BSR related improvement research not only in automobiles but also in other industries, It will be able to understand the BSR phenomenon and provide a framework for thinking out improvement ideas and to carry out further research.

• Science of Emotion and Sensibility
• /
• v.10 no.2
• /
• pp.243-252
• /
• 2007

Anti-depressant and anti-anxiety effects of Saccharomyces cerevisiae extract and its hydrolyzed fraction. The purpose of the present study was to examine the effect of Saccharomyces cerevisiae extract (SCE) and its hydrolyzed fraction (SCE-40) on depression and anxiety-related behaviors in mice. Actions of SCE and SCE-40 on serotonin, norepinephrine and GABAergic systems in the rat cerebral cortex membranes were also examined. SCE and SCE-40 significantly reduced the immobility time in the forced swimming and tail suspension test in mice. Duration time of the open arms in the elevated plus maze test was significantly increased in the SCE and SCE-40-treated groups, compared with the saline-treated control group. SCE and its fraction SCE-40 significantly inhibited serotonin and norepinephrine transporter and GABA receptor binding, compared to the saline-treated group. In addition, serotonin and norepinephrine reuptake were significantly suppressed by SCE and SCE-40. These results demonstrate that SCE and SCE-40 produce anti-depressant and anti-anxiety effects through enhancing central serotonin, norepinephrine and GABAergic transmissions. These results suggest that SCE and SCE-40 as functional food might prove to be an effective antidepressant and anti-anxiety agent.

• Journal of Yeungnam Medical Science
• /
• v.1 no.1
• /
• pp.49-58
• /
• 1984

The differential diagnosis of atypical mycobacteriosis caused by atypical mycobacteria (with the exception of Mycobacterium tuberculosis, Mycobacterium bovis, and Mycobacterium leprae) which are widly distributed in soil and water, from pulmonary tuberculosis is possible only when atypical mycobacteria are isolated and identified. In this investigation, attempts were made to isolate atypical mycobacteria from persons registered as tuberculosis patients in the Anyang Health Center in Anyang City, Kyungki province, Korea. Biological and biochemical tests were performed for the atypical mycobacteria isolated from these patients, also retrospective analysis of clinical and X-ray findings of the patients with bacteriologically confirmed atypical mycobacteriosis were done. The results can be summarized as follows: 1. 103 strains of mycobacteria were isolated among 334 sputum samples from patients. 2. Among the isolated mycobacteria, 10 strains (9.7%) were found to be a atypical mycobacteria and 93 strains (90.3%) were tubercle bacilli of human type. 3. On the basis of Runyon's grouping of atypical mycobacteria, there were 3 strains (30.0 %) of scotochromogen and nonphotochromogen respectively, 4 strains (40.0%) of rapid grower, and no photochromogen. 4. By biochemical tests, 3 strains of scotochromogen were identified as Mycobacterium scrofulaceum (2 strains) and Mycobacterium szulgai (1 strain) 3 strains of nonphotochromogen were Mycobacterium avium-complex (2 strains) and Mycobacterium terriae (1 strain), and 4 strains of rapid grower were Mycobacterium fortuitum (3 strains) and Mycobacterium chelonei. 5. In drug sensitivity tests, all 10 strains isolated atypical mycobacteria showed resistance to various concentration of INH and SM and low concentration (10mcg, 40mcg and 50mcg) of EB, TH, and CS, and were sensitive to only high concentration (20mcg and 100mcg) of EB, TH, CS, and RFP. 6. In analysis of clical findings by the patients with bacteriologically confirmed atypical mycobacteriosis, it was found that clinical symptoms of these patients appeared not to be mild than those of patients with pulmonary tuberculosis. The patients with atypical mycobacteriosis had been treated for pulmonary tuberculosis for a long time and they showed no improvement.